read-only /sys/block/sda/device/queue_depth
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 18 lines · Yan Seiner
I'm running into the same issue reported here:
<http://readlist.com/lists/vger.kernel.org/linux-kernel/72/361184.html>
I am using the
ata_piixmodule. If I read the docs correctly, I should be able to use ahci as well; I need to rebuild the kernel though (debian insists on puttingata_piixinto the initrd....)dionysus:~# ls -l /sys/block/sd[abcde]/device/queue_depth -r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sda/device/queue_depth -r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sdb/device/queue_depth -r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sdc/device/queue_depth -r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sdd/device/queue_depth -r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sde/device/queue_depth
Quoted 1 line
If I change the perms to rw, I get an Input/Output error. AFAICT, the drives support queueing, but it's disabled.
ata_piix does not support NCQ. You have to use AHCI mode for that.
Signature · 3 lines
Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from [email protected] Home Page: http://www.roberthancock.com/