Skip to contentSkip to conversation

Cannot create a logical volume

linux-lvm Vikas 3 participants 3 messages Sep 12, 2008

lore
Share & tools
lore

Vikas

author
#0 lore raw

Objective: Be able to take snapshots of XEN disk images for backup.

Problem: lvcreate is failing

The environment:

[root@localhost ~]# pvscan
PV /dev/md3 VG gt_vg lvm2 [909.91 GB / 909.91 GB free]
Total: 1 [909.91 GB] / in use: 1 [909.91 GB] / in no VG: 0 [0 ]

[root@localhost ~]# vgscan
Reading all physical volumes. This may take a while... Found volume group "gt_vg" using metadata type lvm2

[root@localhost ~]# vgdisplay gt_vg
--- Volume group ---
VG Name gt_vg
System ID

  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  7
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                0
  Open LV               0
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               909.91 GB
  PE Size               32.00 MB
  Total PE              29117
  Alloc PE / Size       0 / 0
  Free  PE / Size       29117 / 909.91 GB
  VG UUID               j4aEP0-PCwG-Qyub-DCxw-aVVp-VyCK-EkZUsN

[root@localhost ~]# lvcreate -L 5G -n data gt_vg
Not enough PVs with free space available for parallel allocation. Consider --alloc anywhere if desperate.

Any feedback would be very much appreciated,

Thanks for your time,

Signature · 1 line
Vikas
#1 lore raw
Quoted 36 lines · Vikas

Objective: Be able to take snapshots of XEN disk images for backup.

Problem: lvcreate is failing

The environment:

[root@localhost ~]# pvscan
PV /dev/md3 VG gt_vg lvm2 [909.91 GB / 909.91 GB free]
Total: 1 [909.91 GB] / in use: 1 [909.91 GB] / in no VG: 0 [0 ]

[root@localhost ~]# vgscan
Reading all physical volumes. This may take a while... Found volume group "gt_vg" using metadata type lvm2

[root@localhost ~]# vgdisplay gt_vg
--- Volume group ---
VG Name gt_vg
System ID

  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  7
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                0
  Open LV               0
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               909.91 GB
  PE Size               32.00 MB
  Total PE              29117
  Alloc PE / Size       0 / 0
  Free  PE / Size       29117 / 909.91 GB
  VG UUID               j4aEP0-PCwG-Qyub-DCxw-aVVp-VyCK-EkZUsN
Quoted 9 lines

[root@localhost ~]# lvcreate -L 5G -n data gt_vg
Not enough PVs with free space available for parallel allocation. Consider --alloc anywhere if desperate.

Any feedback would be very much appreciated,

Thanks for your time,

AFAIK this message should be seen only when trying to create a mirrored or striped lv.

Post at least the log of -vvv run, so we can guess why this is happening. Posting extended lvm info could be helpful too - try lvmdump.

Regards,

Jaroslav Stava

#2 lore raw
Quoted 3 lines · Jaroslav Stava
Quoted 3 lines

[root@localhost ~]# pvscan
PV /dev/md3 VG gt_vg lvm2 [909.91 GB / 909.91 GB free]
Total: 1 [909.91 GB] / in use: 1 [909.91 GB] / in no VG: 0 [0 ]

...

Quoted 11 lines
Quoted 9 lines

[root@localhost ~]# lvcreate -L 5G -n data gt_vg
Not enough PVs with free space available for parallel allocation. Consider --alloc anywhere if desperate.

Any feedback would be very much appreciated,

Thanks for your time,

AFAIK this message should be seen only when trying to create a mirrored or striped lv.

There is another possible problem:

Is the PV allowed to allocate any extents?

Please check "pvdisplay /dev/md3" - there should be
Allocatable yes

If not, allow allocation on the PV: "pvchange -x y /dev/md3" and try lvcreate again.

That error message is misleading it this situation...

Milan
--
[email protected]