Skip to contentSkip to conversation

faulty screen resolution

DISCUSSION William Stanard 3 participants 3 messages Aug 31, 2004 – Sep 1, 2004

lore
Share & tools
lore
#0 lore raw

I'm running Linux 2.4.18-14smp on a Compaq Proliant, using an Acer 56c monitor, and the X login practically fills the screen. I cannot even get to the OK button in trying to switch the screen resolution. This pretty well immobilizes me as far as using the Mozilla browser or any Xterm apps. Any ideas? When I was running the same 2.4.18-14 on an old Acer desktop model, no problem... the monitor comes from that setup, by the way. Would it be safe to swap the video cards as a kludge? BTW, what does the smp mean at the end of the version number?

Bill Stanard
Academic Computing
Palmer Trinity School

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 9 lines · William Stanard

I'm running Linux 2.4.18-14smp on a Compaq Proliant, using an Acer 56c monitor, and the X login practically fills the screen. I cannot even get to the OK button in trying to switch the screen resolution. This pretty well immobilizes me as far as using the Mozilla browser or any Xterm apps. Any ideas? When I was running the same 2.4.18-14 on an old Acer desktop model, no problem... the monitor comes from that setup, by the way. Would it be safe to swap the video cards as a kludge? BTW, what does the smp mean at the end of the version number?

Quoted 3 lines

Bill Stanard
Academic Computing
Palmer Trinity School

While you are in X try Ctrl+Alt+(-)or(+)
The - and + will move the resolutions up and down. Which may allow you see the whole screen to configure your resolution.

Mike
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#2 lore raw
Quoted 10 lines · mike
Quoted 9 lines · William Stanard

I'm running Linux 2.4.18-14smp on a Compaq Proliant, using an Acer 56c monitor, and the X login practically fills the screen. I cannot even get to the OK button in trying to switch the screen resolution. This pretty well immobilizes me as far as using the Mozilla browser or any Xterm apps. Any ideas? When I was running the same 2.4.18-14 on an old Acer desktop model, no problem... the monitor comes from that setup, by the way. Would it be safe to swap the video cards as a kludge? BTW, what does the smp mean at the end of the version number?

Quoted 8 lines
Quoted 3 lines

Bill Stanard
Academic Computing
Palmer Trinity School

While you are in X try Ctrl+Alt+(-)or(+)
The - and + will move the resolutions up and down. Which may allow you see the whole screen to configure your resolution.

That approach might work. But from the problem report, it sounds like you (William) are stuck at the xdm or gdm screen, which I believe uses the low-res vga X server and does not have multiple resolutions.

So ... what to do?

1. See if the problem is actually with the monitor; that is, fiddle with its vertical and horizontal settings to see if you can get the full screen to display.

2. See if the problem is with the settings for your video card (the wrong vscan or hscan value, probably).

3. Bypass xdm or gdm completely by going to a vt console. *Exactly* how you do this depsnds on unreported details of your Linxu distro, but the usual way is via CTRL-ALT-F1 through CTRL-ALT-F6, to access the 6 VTs that Linux inittab files usually create. Then from there, use "startx" (after you log in) to bypass the xdm/gdm problem.

BTW, if the VTs also have trouble with the display, then this indicates a hardware problem of some sort.

4. Swap the video cards. This is usually safe, if you follow normal procedures, and -- IMPORTANT QUALIFICATION -- if the old card is compatible with the new mobo. Occasionally, I've run into AGP cards that won't work with some AGP mobos; I even have a mobo that came with a warning that certain AGP cards could destroy the mobo. Since you identify neither of the video cards involved, no one here can assure you that that proposed swap will be "safe".

PS -- "smp" means "Symmetric MultiProcessor". It means the kernel is compiled to work with systems that have 2 or more CPUs.

If you need to post again, please be sure to include more complete basic details: what Linux distro, what X version, what video card(s) ... provide the info for both old and new systems -- in addition to the specifics of the trouble you are having. (This is good advice for ANYONE posting a question, BTW ... always mention the basics of your setup.)

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs