VIA VT2021 Support
Quoted 5 lines
If you have a luck, the codec might be somehow compatible with one of other VIA codecs. If not, we'd need more codes.
Please run
alsa-info.sh(with --no-upload option) on that machine, and give the output.
seems the list's SPAM filter thought the message including full alsa-info.sh output was to large.. so resorting so pastebin http://pastebin.com/7iSFm3mp
A message that is not in the archive (sent off-list or not yet received): s5hzk6pqgg6.wl%[email protected]
Quoted 4 lines
Quoted 3 lines
seems the list's SPAM filter thought the message including full
alsa-info.shoutput was to large.. so resorting so pastebin
http://pastebin.com/7iSFm3mp
Quoted 8 lines
Thanks. Actually VT2021 is identical with VT2020 from the spec POV, so it should be fully supported.
The lack of the headphone output is because of the wrong power state handling. The patch below should fix the issue. Give it a try.
If it still doesn't and the node
0x0bshows the power state D3, it means that the jack detection doesn't work properly on your machine.
this patch works perfectly, great :)
Quoted 39 lines
Takashi
---
sound/pci/hda/patch_via.c +1
-1@@ -3226,7 +3226,7 @@ static void set_widgets_power_state_vt1718S(struct hda_codec *codec) {struct via_spec *spec = codec->spec;int imux_is_smixer; -unsigned int parm; +unsigned int parm, parm2;/* MUX6 (1eh) = stereo mixer */ imux_is_smixer =
snd_hda_codec_read(codec, 0x1e, 0, AC_VERB_GET_CONNECT_SEL, 0x00)
== 5;sound/pci/hda/patch_via.c +1
-1@@ -3249,7 +3249,7 @@ static void set_widgets_power_state_vt1718S(struct hda_codec *codec) parm =AC_PWRST_D3 ;set_pin_power_state (codec,0x27 , &parm);update_power_state (codec,0x1a , parm); -update_power_state (codec,0xb , parm); + parm2 = parm;/* for pin 0x0b */ /* PW2 (26h), AOW2 (ah) */ sound/pci/hda/patch_via.c +3
-0parm =AC_PWRST_D3 ;@@ -3264,6 +3264,9 @@ static void set_widgets_power_state_vt1718S(struct hda_codec *codec) if (!spec->hp_independent_mode) /* check for redirected HP */set_pin_power_state (codec,0x28 , &parm);update_power_state (codec,0x8 , parm); +if (!spec->hp_independent_mode && parm2 !=AC_PWRST_D3 ) + parm = parm2; +update_power_state (codec,0xb , parm);/* MW9 (21h), Mw2 (1ah), AOW0 (8h) */ update_power_state(codec, 0x21, imux_is_smixer ? AC_PWRST_D0 :parm);
At Wed, 25 Jul 2012 11:57:12 +0100,
Quoted 8 lines · Paul Freeman
Quoted 8 lines
Quoted 4 lines
seems the list's SPAM filter thought the message including full
alsa-info.shoutput was to large.. so resorting so pastebin
http://pastebin.com/7iSFm3mpThanks. Actually VT2021 is identical with VT2020 from the spec POV, so it should be fully supported.
Quoted 7 lines
Quoted 5 lines
The lack of the headphone output is because of the wrong power state handling. The patch below should fix the issue. Give it a try.
If it still doesn't and the node
0x0bshows the power state D3, it means that the jack detection doesn't work properly on your machine.this patch works perfectly, great :)
Thanks for testing. The patch is queued now.
Takashi
Quoted 41 lines
Quoted 40 lines
Takashi
---
sound/pci/hda/patch_via.c +1
-1@@ -3226,7 +3226,7 @@ static void set_widgets_power_state_vt1718S(struct hda_codec *codec) {struct via_spec *spec = codec->spec;int imux_is_smixer; -unsigned int parm; +unsigned int parm, parm2;/* MUX6 (1eh) = stereo mixer */ imux_is_smixer =
snd_hda_codec_read(codec, 0x1e, 0, AC_VERB_GET_CONNECT_SEL, 0x00)
== 5;sound/pci/hda/patch_via.c +1
-1@@ -3249,7 +3249,7 @@ static void set_widgets_power_state_vt1718S(struct hda_codec *codec) parm =AC_PWRST_D3 ;set_pin_power_state (codec,0x27 , &parm);update_power_state (codec,0x1a , parm); -update_power_state (codec,0xb , parm); + parm2 = parm;/* for pin 0x0b */ /* PW2 (26h), AOW2 (ah) */ sound/pci/hda/patch_via.c +3
-0parm =AC_PWRST_D3 ;@@ -3264,6 +3264,9 @@ static void set_widgets_power_state_vt1718S(struct hda_codec *codec) if (!spec->hp_independent_mode) /* check for redirected HP */set_pin_power_state (codec,0x28 , &parm);update_power_state (codec,0x8 , parm); +if (!spec->hp_independent_mode && parm2 !=AC_PWRST_D3 ) + parm = parm2; +update_power_state (codec,0xb , parm);/* MW9 (21h), Mw2 (1ah), AOW0 (8h) */ update_power_state(codec, 0x21, imux_is_smixer ? AC_PWRST_D0 :parm);