Skip to contentSkip to conversation

Regression from 2.6.21 to 2.6.22 and above

DISCUSSION Stefan Scheler 2 participants 3 messages Oct 11, 2007 – Oct 12, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

my Kobil KAAN Professional (USB variant) smartcard reader stopped working when upgrading from 2.6.21 to 2.6.22 (and 2.6.23). Not working means that the latest libct.so supplied from Kobil is segfaulting when trying to access the device. But as far as I can see the kobil_sct driver itself didn't change from 2.6.21 to 2.6.22. Any ideas what is going on here?

Thanks in advance. I will provide additional information if needed.

Signature · 1 line
Stefan Scheler
#1 lore raw
Quoted 11 lines · Stefan Scheler

Hello,

my Kobil KAAN Professional (USB variant) smartcard reader stopped working when upgrading from 2.6.21 to 2.6.22 (and 2.6.23). Not working means that the latest libct.so supplied from Kobil is segfaulting when trying to access the device. But as far as I can see the kobil_sct driver itself didn't change from 2.6.21 to 2.6.22. Any ideas what is going on here?

Thanks in advance. I will provide additional information if needed.

Try turning off USB autosuspend by adding the kernel option "usbcore.autosuspend=-1". Or if your USB is modular, add "autosuspend=-1" to the module parameters.

#2 lore raw
Quoted 3 lines

Try turning off USB autosuspend by adding the kernel option "usbcore.autosuspend=-1". Or if your USB is modular, add "autosuspend=-1" to the module parameters.

Doesn't help. You also might have a look at the linux-usb-devel list. I posted a couple of logs there.

Signature · 1 line
Stefan Scheler