IA-64 "instruction group" query...
Greetings,
I am just curious to know if the following instruction bundles are valid ones. In particular, I would like to know if the instruction group comprised of the slots # 1 ( 3621 ), # 2 ( 3622 ) of the first instruction bundle and slot # 0 ( 3630 ) is a VALID group. If you notice, the register R4 is being read as well as modified by these instructions belonging to the same group. Is it a potential RAW -- Read After Write -- violation?
(Assume that the traget processor is Itanium with its feature that it can execute 2 bundles at a time)
{ .mmi
010800458100 3620 adds r4 = 44, r4 ;;
008080400200 3621 ld4 r8 = [r4]
010800400480 3622 adds r18 = 0, r4
}
{ .mmi
0119F84A8100 3630 adds r4 = -44, r4 ;;
000008000000 3631 nop.m 0
0000B0800200 3632 sxt4 r8 = r8 ;;
}Instruction group of my concern
;;
008080400200 3621 ld4 r8 = [r4]
010800400480 3622 adds r18 = 0, r4
}
{ .mmi0119F84A8100 3630 adds r4 = -44, r4
;;
Thanks for your time and attention
Hi Kiran,
your code sequence contains a WAR dependency (add r4=-44,r4). But this in general is allowed inside the IA64 architecture and the pipeline takes care that the writeback is the last step and all reads occur before. So the instruction group (3621-3630) is ok and does not need an additional stop. You'll find dependency rules in detail in the "Intel IA-64 architecture software developer's manual" volume 1.
Christian
Quoted 41 lines · Kiran VMS
Greetings,
I am just curious to know if the following instruction bundles are valid ones. In particular, I would like to know if the instruction group comprised of the slots # 1 ( 3621 ), # 2 ( 3622 ) of the first instruction bundle and slot # 0 ( 3630 ) is a VALID group. If you notice, the register R4 is being read as well as modified by these instructions belonging to the same group. Is it a potential RAW -- Read After Write -- violation?
(Assume that the traget processor is Itanium with its feature that it can execute 2 bundles at a time)
{ .mmi 010800458100 3620 adds r4 = 44, r4 ;; 008080400200 3621 ld4 r8 = [r4] 010800400480 3622 adds r18 = 0, r4 } { .mmi 0119F84A8100 3630 adds r4 = -44, r4 ;; 000008000000 3631 nop.m 0 0000B0800200 3632 sxt4 r8 = r8 ;; }Instruction group of my concern
;;008080400200 3621 ld4 r8 = [r4] 010800400480 3622 adds r18 = 0, r4 } { .mmi0119F84A8100 3630 adds r4 = -44, r4
;;Thanks for your time and attention
-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html