Skip to contentSkip to conversation

Making a USB driver

DISCUSSION J. Pablo Fernández 2 participants 8 messages Jan 21, 2008 – Jan 22, 2008

lore
Share & tools
lore
#0 lore raw

Hello,

I'm interested in making a driver for the Kinesis Savant Elite Programable USB Foot Switches[1]. Is there any way for me to check that such driver doesn't exists already? I've searched a bit on the internet and I couldn't find anything, but if there's somewhere else to look at before learning how to make a driver and all that, it would be helpful.

Thank you.

Signature · 3 lines
J. Pablo Fernández <[email protected]> (http://pupeno.com)

[1] http://kinesis-ergo.com/fs-savant-elite.htm
#1 lore raw
Quoted 4 lines · J. Pablo Fernández

Hello,

I'm interested in making a driver for the Kinesis Savant Elite Programable USB Foot Switches[1].

[1]+1 says
Linux, Sun and other Non Windows Platforms
· Requires available USB port. Uses generic drivers provided by the operating system. Due to the heterogeneity in these platforms, we cannot guarantee compatibility with these systems. However, if your system can use any USB mouse and keyboard, it will probably work with a Savant or Savant Elite foot switch.

I guess it's ordinary input device without any special driver needs.

#2 lore raw
Quoted 14 lines · On Monday 21 January 2008 22:00:31 Jiri Slaby wrote:
Quoted 4 lines · J. Pablo Fernández

Hello,

I'm interested in making a driver for the Kinesis Savant Elite Programable USB Foot Switches[1].

[1]+1 says
Linux, Sun and other Non Windows Platforms
· Requires available USB port. Uses generic drivers provided by the operating system. Due to the heterogeneity in these platforms, we cannot guarantee compatibility with these systems. However, if your system can use any USB mouse and keyboard, it will probably work with a Savant or Savant Elite foot switch.

Quoted 1 line

I guess it's ordinary input device without any special driver needs.

It sends ordinary mouse and keyboard commands, but you need a driver to program it what commands to send, and that's the part I want to cover: " it can be easily reprogrammed on a Windows [and only Windows] PC to perform any keyboard action or key combination."

Signature · 1 line
J. Pablo Fernández <[email protected]> http://pupeno.com
#3 lore raw
Quoted 14 lines · J. Pablo Fernández
Quoted 13 lines · On Monday 21 January 2008 22:00:31 Jiri Slaby wrote:
Quoted 4 lines · J. Pablo Fernández

Hello,

I'm interested in making a driver for the Kinesis Savant Elite Programable USB Foot Switches[1].

[1]+1 says
Linux, Sun and other Non Windows Platforms
· Requires available USB port. Uses generic drivers provided by the operating system. Due to the heterogeneity in these platforms, we cannot guarantee compatibility with these systems. However, if your system can use any USB mouse and keyboard, it will probably work with a Savant or Savant Elite foot switch.

Quoted 3 lines
Quoted 1 line

I guess it's ordinary input device without any special driver needs.

It sends ordinary mouse and keyboard commands, but you need a driver to program it what commands to send, and that's the part I want to cover: " it can be easily reprogrammed on a Windows [and only Windows] PC to perform any keyboard action or key combination."

But you didn't even mention that. Then try to search for usb ids in the tree and also in google.

#4 lore raw
Quoted 17 lines · Jiri Slaby
Quoted 16 lines · J. Pablo Fernández
Quoted 14 lines · On Monday 21 January 2008 22:00:31 Jiri Slaby wrote:
Quoted 4 lines · J. Pablo Fernández

Hello,

I'm interested in making a driver for the Kinesis Savant Elite Programable USB Foot Switches[1].

[1]+1 says
Linux, Sun and other Non Windows Platforms
· Requires available USB port. Uses generic drivers provided by the operating system. Due to the heterogeneity in these platforms, we cannot guarantee compatibility with these systems. However, if your system can use any USB mouse and keyboard, it will probably work with a Savant or Savant Elite foot switch.

I guess it's ordinary input device without any special driver needs.

Quoted 7 lines
Quoted 4 lines

It sends ordinary mouse and keyboard commands, but you need a driver to program it what commands to send, and that's the part I want to cover: " it can be easily reprogrammed on a Windows [and only Windows] PC to perform any keyboard action or key combination."

But you didn't even mention that. Then try to search for usb ids in the tree and also in google.

I don't have the device. Maybe I can ask the vendor for the ids? how exactly should I ask?

Thanks.

Signature · 1 line
J. Pablo Fernández <[email protected]> (http://pupeno.com)
#5 lore raw

We usualy reply to all.

Quoted 22 lines · J. Pablo Fernández
Quoted 20 lines · Jiri Slaby
Quoted 19 lines · J. Pablo Fernández
Quoted 13 lines · On Monday 21 January 2008 22:00:31 Jiri Slaby wrote:
Quoted 4 lines · J. Pablo Fernández

Hello,

I'm interested in making a driver for the Kinesis Savant Elite Programable USB Foot Switches[1].

[1]+1 says
Linux, Sun and other Non Windows Platforms
· Requires available USB port. Uses generic drivers provided by the operating system. Due to the heterogeneity in these platforms, we cannot guarantee compatibility with these systems. However, if your system can use any USB mouse and keyboard, it will probably work with a Savant or Savant Elite foot switch.

Quoted 1 line

I guess it's ordinary input device without any special driver needs.

It sends ordinary mouse and keyboard commands, but you need a driver to program it what commands to send, and that's the part I want to cover: " it can be easily reprogrammed on a Windows [and only Windows] PC to perform any keyboard action or key combination."

Quoted 5 lines
Quoted 2 lines

But you didn't even mention that. Then try to search for usb ids in the tree and also in google.

I don't have the device. Maybe I can ask the vendor for the ids? how exactly should I ask?

Ask for specification, otherwise you won't be able to write a driver anyway.

#6 lore raw

<posted & mailed>

Hello Jiri,

Quoted 1 line · Jiri Slaby

We usualy reply to all.

I'm sorry. I'm using Gmane to read and post to this mailing list and my newsgroup reader doesn't reply to all by default.

Quoted 23 lines · J. Pablo Fernández
Quoted 22 lines
Quoted 20 lines · Jiri Slaby
Quoted 19 lines · J. Pablo Fernández
Quoted 13 lines · On Monday 21 January 2008 22:00:31 Jiri Slaby wrote:
Quoted 4 lines · J. Pablo Fernández

Hello,

I'm interested in making a driver for the Kinesis Savant Elite Programable USB Foot Switches[1].

[1]+1 says
Linux, Sun and other Non Windows Platforms
· Requires available USB port. Uses generic drivers provided by the operating system. Due to the heterogeneity in these platforms, we cannot guarantee compatibility with these systems. However, if your system can use any USB mouse and keyboard, it will probably work with a Savant or Savant Elite foot switch.

Quoted 1 line

I guess it's ordinary input device without any special driver needs.

It sends ordinary mouse and keyboard commands, but you need a driver to program it what commands to send, and that's the part I want to cover:
" it can be easily reprogrammed on a Windows [and only Windows] PC to perform any keyboard action or key combination."

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

But you didn't even mention that. Then try to search for usb ids in the tree and also in google.

I don't have the device. Maybe I can ask the vendor for the ids? how exactly should I ask?

Ask for specification, otherwise you won't be able to write a driver anyway.

They already told me they don't even have the specification. I'm already considering doing reverse engineering to get the information. It won't be easy for me because I'm new to this level, but it shouldn't be very hard, it's not a scanner or a webcam, it should be a fairly simple protocol.

Thank you.

Signature · 1 line
J. Pablo Fernández <[email protected]> (http://pupeno.com)
#7 lore raw
Quoted 6 lines · J. Pablo Fernández
Quoted 4 lines · J. Pablo Fernández
Quoted 1 line

Jiri Slaby wrote:

Ask for specification, otherwise you won't be able to write a driver anyway.

They already told me they don't even have the specification.

Maybe they might provide you some pieces of win code :P?

Quoted 4 lines

I'm already
considering doing reverse engineering to get the information. It won't be easy for me because I'm new to this level, but it shouldn't be very hard, it's not a scanner or a webcam, it should be a fairly simple protocol.

Ok, then you need the device anyway :). After you got it, you might get the usb ids.