NULL pointer dereference caused by uvcvideo stress test
Quoted 8 lines · Laurent Pinchart
Hi Alan,
Quoted 4 lines · Alan Jenkins
This is is on v2.6.27-rc6. I originally saw it on todays -tip tree.
# while true; do modprobe uvcvideo; modprobe -r uvcvideo; done
Quoted 8 lines
Quoted 3 lines
After a few tens of cycles, modprobe gets stuck in "D" state, and the following backtrace appears:
[snip]
I can't reproduce the issue here on 2.6.27. Could you please test that version ?
Sure... still happens.
If you look at the trace, it happens as "hald-probe-video" opens the video device. This is from Ubuntu 8.04. Possibly it's significant that I use the camera first, to make sure it works (I use Kopete, the settings dialogue includes a video test).
[ 267.056655] input: UVC Camera (eb1a:2761) as /class/input/input59 [ 267.069990] usbcore: registered new interface driver uvcvideo [ 267.069990] USB Video Class driver (v0.1.0) [ 267.299989] usbcore: deregistering interface driver uvcvideo [ 267.336656] Linux video capture interface: v2.00 [ 267.349981] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761) [ 267.353317] input: UVC Camera (eb1a:2761) as /class/input/input60 [ 267.363324] usbcore: registered new interface driver uvcvideo [ 267.363324] USB Video Class driver (v0.1.0) [ 267.373325] BUG: unable to handle kernel NULL pointer dereference at 00000030 [ 267.373325] IP: [<e03e13ec>] :videodev:video_open+0x8b/0xe4 [ 267.373325] *pdpt = 0000000011ebc001 *pde = 0000000000000000 [ 267.373325] Oops: 0000 [#1] [ 267.373325] Modules linked in: uvcvideo(-) compat_ioctl32 videodev v4l1_compat aes_i586 aes_generic af_packet i915 drm cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_stats freq_table cpufreq_conservative wmi sbs sbshc ip6t_LOG nf_conntrack_ipv6 ipt_LOG xt_limit ipt_addrtype xt_state xt_tcpudp xt_conntrack ip6table_filter ip6_tables ipv6 nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables dm_crypt dm_mod fuse joydev arc4 ecb crypto_blkcipher ath5k mac80211 led_class sg cfg80211 psmouse serio_raw snd_hda_intel snd_pcm_oss snd_mixer_oss ata_generic snd_pcm snd_timer snd_page_alloc snd_hwdep shpchp pci_hotplug intel_agp agpgart video output battery ac eeepc_laptop backlight button evdev uhci_hcd ehci_hcd usb_storage libusual pcspkr usbcore thermal processor fan [last unloaded: v4l1_compat] [ 267.373325] [ 267.373325] Pid: 7709, comm: hald-probe-vide Not tainted (2.6.27eeepc #61) [ 267.373325] EIP: 0060:[<e03e13ec>] EFLAGS: 00010246 CPU: 0 [ 267.373325] EIP is at video_open+0x8b/0xe4 [videodev] [ 267.373325] EAX: 00000000 EBX: e03e49d0 ECX: e03e1361 EDX: d1e6c000 [ 267.373325] ESI: d1ea5c80 EDI: 00000000 EBP: debf41ec ESP: d1efde98 [ 267.373325] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 267.373325] Process hald-probe-vide (pid: 7709, ti=d1efc000 task=d1c586e0 task.ti=d1efc000) [ 267.373325] Stack: 00000000 df1e17c0 00000000 debf41ec c01604e6 d1ea5c80 00000000 d1ea5c80 [ 267.373325] debf41ec d1efdf14 c0160406 c015d36d deae0580 def61700 d1efdf14 d1ea5c80 [ 267.373325] d1efdf14 00008001 c015d471 d1ea5c80 00000000 00000000 d1efdf14 c016692e [ 267.373325] Call Trace: [ 267.373325] [<c01604e6>] chrdev_open+0xe0/0xf6 [ 267.373325] [<c0160406>] chrdev_open+0x0/0xf6 [ 267.373325] [<c015d36d>] __dentry_open+0xf2/0x1da [ 267.373325] [<c015d471>] nameidata_to_filp+0x1c/0x2c [ 267.373325] [<c016692e>] do_filp_open+0x343/0x61e [ 267.373325] [<c014e1ad>] handle_mm_fault+0x27d/0x528 [ 267.373325] [<c016df2d>] alloc_fd+0x46/0xad [ 267.373325] [<c015d1a8>] do_sys_open+0x3f/0xb3 [ 267.373325] [<c015d260>] sys_open+0x1e/0x23 [ 267.373325] [<c01035c1>] sysenter_do_call+0x12/0x21 [ 267.373325] [<c0280000>] xfrm_state_find+0x3bb/0x4b1 [ 267.373325] ======================= [ 267.373325] Code: c4 0c 85 d2 74 6d 8b 02 8b 5e 10 85 c0 74 15 8b 00 85 c0 74 0b 83 38 02 74 0a ff 80 40 01 00 00 8b 02 eb 02 31 c0 89 46 10 31 ff <8b> 48 30 85 c9 74 36 89 f2 89 e8 ff d1 85 c0 89 c7 74 2a 8b 46 [ 267.373325] EIP: [<e03e13ec>] video_open+0x8b/0xe4 [videodev] SS:ESP 0068:d1efde98 [ 267.373325] ---[ end trace 1a1a7d2a0a55bf75 ]--- [ 267.379201] usbcore: deregistering interface driver uvcvideo
Hi Alan,
Quoted 11 lines · Alan Jenkins
Quoted 10 lines · Laurent Pinchart
Hi Alan,
Quoted 6 lines · Alan Jenkins
This is is on v2.6.27-rc6. I originally saw it on todays -tip tree.
# while true; do modprobe uvcvideo; modprobe -r uvcvideo; doneAfter a few tens of cycles, modprobe gets stuck in "D" state, and the following backtrace appears:
Quoted 6 lines
Quoted 4 lines
[snip]
I can't reproduce the issue here on 2.6.27. Could you please test that version ?
Sure... still happens.
I had secretly hoped it would have disapearred :-)
Quoted 4 lines
If you look at the trace, it happens as "hald-probe-video" opens the video device. This is from Ubuntu 8.04. Possibly it's significant that I use the camera first, to make sure it works (I use Kopete, the settings dialogue includes a video test).
The NULL pointer (or rather 0x00000030 pointer) dereference happens in video_open:
file->f_op = fops_get(vfl->fops);
if (file->f_op->open)
err = file->f_op->open(inode, file);file->f_op ends up being NULL. Either vfl->fops is NULL to begin with, or fops_get failed to get a reference to the file_operations structure.
I'd be surprised if vfl->fops was NULL. To rule out that case, can you add a BUG_ON(vfl->fops == NULL) before the call to fops_get ?
I'm not too familiar with the module loader, but a quick look at the code shows that the module could be marked as being unloaded (MODULE_STATE_GOING) before its exit function is called. If this is the case video_open would still be called, as the video device would still be registered, but fops_get would fail in try_module_get and return a NULL pointer. It seems the pointer returned by fops_get should be tested in video_open.
I've CC'ed the v4l maintainer to get his opinion on this.
Quoted 55 lines
[ 267.056655] input: UVC Camera (eb1a:2761) as /class/input/input59 [ 267.069990] usbcore: registered new interface driver uvcvideo [ 267.069990] USB Video Class driver (v0.1.0) [ 267.299989] usbcore: deregistering interface driver uvcvideo [ 267.336656] Linux video capture interface: v2.00 [ 267.349981] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761) [ 267.353317] input: UVC Camera (eb1a:2761) as /class/input/input60 [ 267.363324] usbcore: registered new interface driver uvcvideo [ 267.363324] USB Video Class driver (v0.1.0) [ 267.373325] BUG: unable to handle kernel NULL pointer dereference at 00000030 [ 267.373325] IP: [<e03e13ec>] :videodev:video_open+0x8b/0xe4 [ 267.373325] *pdpt = 0000000011ebc001 *pde = 0000000000000000 [ 267.373325] Oops: 0000 [#1] [ 267.373325] Modules linked in: uvcvideo(-) compat_ioctl32 videodev
v4l1_compataes_i586aes_genericaf_packeti915 drmcpufreq_userspacecpufreq_powersavecpufreq_ondemandcpufreq_statsfreq_tablecpufreq_conservativewmi sbs sbshcip6t_LOGnf_conntrack_ipv6ipt_LOGxt_limitipt_addrtypext_statext_tcpudpxt_conntrackip6table_filterip6_tablesipv6nf_nat_ircnf_conntrack_ircnf_nat_ftpnf_natnf_conntrack_ipv4nf_conntrack_ftpnf_conntrackiptable_filterip_tablesx_tablesdm_cryptdm_modfuse joydev arc4 ecbcrypto_blkcipherath5k mac80211led_classsg cfg80211 psmouseserio_rawsnd_hda_intelsnd_pcm_osssnd_mixer_ossata_genericsnd_pcmsnd_timersnd_page_allocsnd_hwdepshpchppci_hotplugintel_agpagpgart video output battery aceeepc_laptopbacklight button evdevuhci_hcdehci_hcdusb_storagelibusual pcspkr usbcore thermal processor fan [last unloaded:v4l1_compat][ 267.373325] [ 267.373325] Pid: 7709, comm: hald-probe-vide Not tainted (2.6.27eeepc #61) [ 267.373325] EIP: 0060:[<e03e13ec>] EFLAGS: 00010246 CPU: 0 [ 267.373325] EIP is at video_open+0x8b/0xe4 [videodev] [ 267.373325] EAX: 00000000 EBX: e03e49d0 ECX: e03e1361 EDX: d1e6c000 [ 267.373325] ESI: d1ea5c80 EDI: 00000000 EBP: debf41ec ESP: d1efde98 [ 267.373325] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 267.373325] Process hald-probe-vide (pid: 7709, ti=d1efc000 task=d1c586e0 task.ti=d1efc000) [ 267.373325] Stack: 00000000 df1e17c0 00000000 debf41ec c01604e6 d1ea5c80 00000000 d1ea5c80 [ 267.373325] debf41ec d1efdf14 c0160406 c015d36d deae0580 def61700 d1efdf14 d1ea5c80 [ 267.373325] d1efdf14 00008001 c015d471 d1ea5c80 00000000 00000000 d1efdf14 c016692e [ 267.373325] Call Trace: [ 267.373325] [<c01604e6>] chrdev_open+0xe0/0xf6 [ 267.373325] [<c0160406>] chrdev_open+0x0/0xf6 [ 267.373325] [<c015d36d>] __dentry_open+0xf2/0x1da [ 267.373325] [<c015d471>] nameidata_to_filp+0x1c/0x2c [ 267.373325] [<c016692e>] do_filp_open+0x343/0x61e [ 267.373325] [<c014e1ad>] handle_mm_fault+0x27d/0x528 [ 267.373325] [<c016df2d>] alloc_fd+0x46/0xad [ 267.373325] [<c015d1a8>] do_sys_open+0x3f/0xb3 [ 267.373325] [<c015d260>] sys_open+0x1e/0x23 [ 267.373325] [<c01035c1>] sysenter_do_call+0x12/0x21 [ 267.373325] [<c0280000>] xfrm_state_find+0x3bb/0x4b1
Quoted 8 lines
[ 267.373325] ======================= [ 267.373325] Code: c4 0c 85 d2 74 6d 8b 02 8b 5e 10 85 c0 74 15 8b 00 85 c0 74 0b 83 38 02 74 0a ff 80 40 01 00 00 8b 02 eb 02 31 c0 89 46 10 31 ff <8b> 48 30 85 c9 74 36 89 f2 89 e8 ff d1 85 c0 89 c7 74 2a 8b 46 [ 267.373325] EIP: [<e03e13ec>] video_open+0x8b/0xe4 [videodev] SS:ESP 0068:d1efde98 [ 267.373325] ---[ end trace 1a1a7d2a0a55bf75 ]--- [ 267.379201] usbcore: deregistering interface driver uvcvideo
Best regards,
Laurent Pinchart
Quoted 40 lines · Laurent Pinchart
Hi Alan,
Quoted 13 lines · Alan Jenkins
Quoted 11 lines · Laurent Pinchart
Hi Alan,
Quoted 7 lines · Alan Jenkins
This is is on v2.6.27-rc6. I originally saw it on todays -tip tree.
# while true; do modprobe uvcvideo; modprobe -r uvcvideo; doneAfter a few tens of cycles, modprobe gets stuck in "D" state, and the following backtrace appears:
Quoted 7 lines
Quoted 5 lines
[snip]
I can't reproduce the issue here on 2.6.27. Could you please test that version ?
Sure... still happens.
I had secretly hoped it would have disapearred :-)
Quoted 5 lines
If you look at the trace, it happens as "hald-probe-video" opens the video device. This is from Ubuntu 8.04. Possibly it's significant that I use the camera first, to make sure it works (I use Kopete, the settings dialogue includes a video test).
The NULL pointer (or rather
0x00000030pointer) dereference happens invideo_open:file->f_op = fops_get(vfl->fops); if (file->f_op->open) err = file->f_op->open(inode, file);
Quoted 8 lines
file->f_opends up being NULL. Eithervfl->fopsis NULL to begin with, orfops_getfailed to get a reference to thefile_operationsstructure.I'd be surprised if
vfl->fopswas NULL. To rule out that case, can you add aBUG_ON(vfl->fops == NULL)before the call tofops_get?I'm not too familiar with the module loader, but a quick look at the code shows that the module could be marked as being unloaded (
MODULE_STATE_GOING) before its exit function is called. If this is the casevideo_openwould still be called, as the video device would still be registered, butfops_getwould fail intry_module_getand return a NULL pointer. It seems the pointer returned byfops_getshould be tested invideo_open.I've CC'ed the v4l maintainer to get his opinion on this.
I put one before and one after
134 BUG_ON(vfl->fops == NULL); 135 file->f_op = fops_get(vfl->fops); 136 BUG_ON(file->f_op == NULL);
and the second one triggered
[ 245.379990] ------------[ cut here ]------------ [ 245.379990] kernel BUG at drivers/media/video/v4l2-dev.c:136! [ 245.379990] invalid opcode: 0000 [#1] [ 245.379990] Modules linked in: uvcvideo(-) compat_ioctl32 videodev v4l1_compat aes_i586 aes_generic af_packet i915 drm cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_stats freq_table cpufreq_conservative wmi sbs sbshc ip6t_LOG nf_conntrack_ipv6 ipt_LOG xt_limit ipt_addrtype xt_state xt_tcpudp xt_conntrack ip6table_filter ip6_tables ipv6 nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables dm_crypt dm_mod fuse joydev arc4 ecb crypto_blkcipher ath5k mac80211 led_class cfg80211 psmouse serio_raw sg snd_hda_intel ata_generic snd_pcm_oss snd_mixer_oss snd_pcm shpchp pci_hotplug snd_timer snd_page_alloc snd_hwdep intel_agp agpgart video output battery ac eeepc_laptop backlight button evdev uhci_hcd ehci_hcd usb_storage libusual usbcore pcspkr thermal processor fan [last unloaded: v4l1_compat] [ 245.379990] [ 245.379990] Pid: 11686, comm: hald-probe-vide Not tainted (2.6.27eeepc #62) [ 245.379990] EIP: 0060:[<e024f3f2>] EFLAGS: 00010246 CPU: 0 [ 245.379990] EIP is at video_open+0x8f/0xee [videodev] [ 245.379990] EAX: e03fbf40 EBX: e02529dc ECX: 00000000 EDX: d1d20e00 [ 245.379990] ESI: d1f33780 EDI: ffffffed EBP: de4e182c ESP: d1fade98 [ 245.379990] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 245.379990] Process hald-probe-vide (pid: 11686, ti=d1fac000 task=d8e73810 task.ti=d1fac000) [ 245.379990] Stack: 00000000 d1f20540 00000000 de4e182c c01604e6 d1f33780 00000000 d1f33780 [ 245.379990] de4e182c d1fadf14 c0160406 c015d36d deae2580 d22c8600 d1fadf14 d1f33780 [ 245.379990] d1fadf14 00008001 c015d471 d1f33780 00000000 00000000 d1fadf14 c016692e [ 245.379990] Call Trace: [ 245.379990] [<c01604e6>] chrdev_open+0xe0/0xf6 [ 245.379990] [<c0160406>] chrdev_open+0x0/0xf6 [ 245.379990] [<c015d36d>] __dentry_open+0xf2/0x1da [ 245.379990] [<c015d471>] nameidata_to_filp+0x1c/0x2c [ 245.379990] [<c016692e>] do_filp_open+0x343/0x61e [ 245.379990] [<c014e1ad>] handle_mm_fault+0x27d/0x528 [ 245.379990] [<c016df2d>] alloc_fd+0x46/0xad [ 245.379990] [<c015d1a8>] do_sys_open+0x3f/0xb3 [ 245.379990] [<c015d260>] sys_open+0x1e/0x23 [ 245.379990] [<c01035c1>] sysenter_do_call+0x12/0x21 [ 245.379990] [<c0280000>] xfrm_state_find+0x3bb/0x4b1 [ 245.379990] ======================= [ 245.379990] Code: 74 77 8b 02 8b 5e 10 85 c0 75 04 0f 0b eb fe 8b 00 85 c0 74 0d 31 c9 83 38 02 74 08 ff 80 40 01 00 00 8b 0a 85 c9 89 4e 10 75 04 <0f> 0b eb fe 8b 49 30 31 ff 85 c9 74 36 89 f2 89 e8 ff d1 85 c0 [ 245.379990] EIP: [<e024f3f2>] video_open+0x8f/0xee [videodev] SS:ESP 0068:d1fade98 [ 245.379990] ---[ end trace 2385a52acb7b9557 ]---
Hi Alan,
Quoted 30 lines · Alan Jenkins
Quoted 27 lines · Laurent Pinchart
Quoted 4 lines · Alan Jenkins
If you look at the trace, it happens as "hald-probe-video" opens the video device. This is from Ubuntu 8.04. Possibly it's significant that I use the camera first, to make sure it works (I use Kopete, the settings dialogue includes a video test).
The NULL pointer (or rather
0x00000030pointer) dereference happens invideo_open:file->f_op = fops_get(vfl->fops); if (file->f_op->open) err = file->f_op->open(inode, file);
file->f_opends up being NULL. Eithervfl->fopsis NULL to begin with, orfops_getfailed to get a reference to thefile_operationsstructure.I'd be surprised if
vfl->fopswas NULL. To rule out that case, can you add aBUG_ON(vfl->fops == NULL)before the call tofops_get?I'm not too familiar with the module loader, but a quick look at the code shows that the module could be marked as being unloaded (
MODULE_STATE_GOING) before its exit function is called. If this is the casevideo_openwould still be called, as the video device would still be registered, butfops_getwould fail intry_module_getand return a NULL pointer. It seems the pointer returned byfops_getshould be tested invideo_open.Quoted 1 line
I've CC'ed the v4l maintainer to get his opinion on this.
Quoted 7 lines
I put one before and one after
134 BUG_ON(vfl->fops == NULL); 135 file->f_op = fops_get(vfl->fops); 136 BUG_ON(file->f_op == NULL);and the second one triggered
This confirms my suspicion. Could you please try the attached patch ?
Best regards,
Laurent Pinchart
drivers/media/video/v4l2-dev.c +6 -0
@@ -132,6 +132,11 @@ static int video_open(struct inode *inode, struct file *file) } old_fops = file->f_op; file->f_op =fops_get (vfl->fops); +if (file->f_op ==NULL ) { + file->f_op = old_fops; + err = -ENODEV ; + goto out; + }if (file->f_op->open) err = file->f_op->open (inode, file);if (err) {
@@ -139,6 +144,7 @@ static int video_open(struct inode *inode, struct file *file) file->f_op =fops_get (old_fops); }fops_put (old_fops); +out:mutex_unlock (&videodev_lock);unlock_kernel ();return err;
Quoted 38 lines · Laurent Pinchart
Hi Alan,
Quoted 34 lines · Alan Jenkins
Quoted 28 lines · Laurent Pinchart
Quoted 5 lines · Alan Jenkins
If you look at the trace, it happens as "hald-probe-video" opens the video device. This is from Ubuntu 8.04. Possibly it's significant that I use the camera first, to make sure it works (I use Kopete, the settings dialogue includes a video test).
The NULL pointer (or rather
0x00000030pointer) dereference happens invideo_open:file->f_op = fops_get(vfl->fops); if (file->f_op->open) err = file->f_op->open(inode, file);
file->f_opends up being NULL. Eithervfl->fopsis NULL to begin with, orfops_getfailed to get a reference to thefile_operationsstructure.I'd be surprised if
vfl->fopswas NULL. To rule out that case, can you add aBUG_ON(vfl->fops == NULL)before the call tofops_get?I'm not too familiar with the module loader, but a quick look at the code shows that the module could be marked as being unloaded (
MODULE_STATE_GOING) before its exit function is called. If this is the casevideo_openwould still be called, as the video device would still be registered, butfops_getwould fail intry_module_getand return a NULL pointer. It seems the pointer returned byfops_getshould be tested invideo_open.Quoted 2 lines
I've CC'ed the v4l maintainer to get his opinion on this.
I put one before and one after
Quoted 9 lines
Quoted 6 lines
134 BUG_ON(vfl->fops == NULL); 135 file->f_op = fops_get(vfl->fops); 136 BUG_ON(file->f_op == NULL);and the second one triggered
This confirms my suspicion. Could you please try the attached patch ?
Yup, that seems to fix it.
I wonder if there are more instances of this error in other subsystems.
Ta
Alan
Hi Alan,
Quoted 38 lines · Alan Jenkins
Quoted 37 lines · Laurent Pinchart
Quoted 36 lines · Alan Jenkins
Quoted 27 lines · Laurent Pinchart
Quoted 4 lines · Alan Jenkins
If you look at the trace, it happens as "hald-probe-video" opens the video device. This is from Ubuntu 8.04. Possibly it's significant that I use the camera first, to make sure it works (I use Kopete, the settings dialogue includes a video test).
The NULL pointer (or rather
0x00000030pointer) dereference happens invideo_open:file->f_op = fops_get(vfl->fops); if (file->f_op->open) err = file->f_op->open(inode, file);
file->f_opends up being NULL. Eithervfl->fopsis NULL to begin with, orfops_getfailed to get a reference to thefile_operationsstructure.I'd be surprised if
vfl->fopswas NULL. To rule out that case, can you add aBUG_ON(vfl->fops == NULL)before the call tofops_get?I'm not too familiar with the module loader, but a quick look at the code shows that the module could be marked as being unloaded (
MODULE_STATE_GOING) before its exit function is called. If this is the casevideo_openwould still be called, as the video device would still be registered, butfops_getwould fail intry_module_getand return a NULL pointer. It seems the pointer returned byfops_getshould be tested invideo_open.Quoted 1 line
I've CC'ed the v4l maintainer to get his opinion on this.
I put one before and one after
134 BUG_ON(vfl->fops == NULL); 135 file->f_op = fops_get(vfl->fops); 136 BUG_ON(file->f_op == NULL);
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
and the second one triggered
This confirms my suspicion. Could you please try the attached patch ?
Yup, that seems to fix it.
Great.
Quoted 3 lines
I wonder if there are more instances of this error in other subsystems.
From a quick grep it seems the following subsystems are affected:
drivers/media/videodrivers/media/video/dvb/dvb-coredrivers/gpu/drmsound/core
Unless the issue is critical and should be fixed before 2.6.28, drivers/media/video won't matter as the v4l core has already been moved to the cdev API in the kernel tree, removing the offending code.
Will you submit patches for the other three subsystems or would you like me to take care of that ?
Best regards,
Laurent Pinchart
Quoted 66 lines · Laurent Pinchart
Hi Alan,
Quoted 42 lines · Alan Jenkins
Quoted 40 lines · Laurent Pinchart
Quoted 38 lines · Alan Jenkins
Quoted 28 lines · Laurent Pinchart
Quoted 5 lines · Alan Jenkins
If you look at the trace, it happens as "hald-probe-video" opens the video device. This is from Ubuntu 8.04. Possibly it's significant that I use the camera first, to make sure it works (I use Kopete, the settings dialogue includes a video test).
The NULL pointer (or rather
0x00000030pointer) dereference happens invideo_open:file->f_op = fops_get(vfl->fops); if (file->f_op->open) err = file->f_op->open(inode, file);
file->f_opends up being NULL. Eithervfl->fopsis NULL to begin with, orfops_getfailed to get a reference to thefile_operationsstructure.I'd be surprised if
vfl->fopswas NULL. To rule out that case, can you add aBUG_ON(vfl->fops == NULL)before the call tofops_get?I'm not too familiar with the module loader, but a quick look at the code shows that the module could be marked as being unloaded (
MODULE_STATE_GOING) before its exit function is called. If this is the casevideo_openwould still be called, as the video device would still be registered, butfops_getwould fail intry_module_getand return a NULL pointer. It seems the pointer returned byfops_getshould be tested invideo_open.Quoted 2 lines
I've CC'ed the v4l maintainer to get his opinion on this.
I put one before and one after
134 BUG_ON(vfl->fops == NULL); 135 file->f_op = fops_get(vfl->fops); 136 BUG_ON(file->f_op == NULL);Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
and the second one triggered
This confirms my suspicion. Could you please try the attached patch ?
Yup, that seems to fix it.
Great.
Quoted 2 lines
I wonder if there are more instances of this error in other subsystems.
From a quick grep it seems the following subsystems are affected:
drivers/media/videodrivers/media/video/dvb/dvb-coredrivers/gpu/drmsound/core
Quoted 7 lines
Unless the issue is critical and should be fixed before 2.6.28,
drivers/media/videowon't matter as the v4l core has already been moved to the cdev API in the kernel tree, removing the offending code.Will you submit patches for the other three subsystems or would you like me to take care of that ?
I need to start concentrating on project work. Feel free to take all the hard work^W^W patch credits :).
It's not critical to me. This only happens in the stress test because it unloads the module "too soon" after loading it, while HAL tries to open the new device.
It's a completely artificial test. I ran it to see what happens with input devices - the device numbers don't seem to be reallocated like e.g. usb storage devices. Continually reloading the uvcvideo driver means the number assigned to input device increments each time, and you get "input67" and so on. I haven't worked out whether this is a bug though. For all I know the numbers are reused eventually, once they've run through the entire device minor space.
Alan
Quoted 35 lines · On Thu, 16 Oct 2008 11:01:27 +0100 Alan Jenkins <[email protected]>…
Quoted 34 lines · Laurent Pinchart
Hi Alan,
Quoted 30 lines · Alan Jenkins
Quoted 28 lines · Laurent Pinchart
Quoted 5 lines · Alan Jenkins
If you look at the trace, it happens as "hald-probe-video" opens the video device. This is from Ubuntu 8.04. Possibly it's significant that I use the camera first, to make sure it works (I use Kopete, the settings dialogue includes a video test).
The NULL pointer (or rather
0x00000030pointer) dereference happens invideo_open:file->f_op = fops_get(vfl->fops); if (file->f_op->open) err = file->f_op->open(inode, file);
file->f_opends up being NULL. Eithervfl->fopsis NULL to begin with, orfops_getfailed to get a reference to thefile_operationsstructure.I'd be surprised if
vfl->fopswas NULL. To rule out that case, can you add aBUG_ON(vfl->fops == NULL)before the call tofops_get?I'm not too familiar with the module loader, but a quick look at the code shows that the module could be marked as being unloaded (
MODULE_STATE_GOING) before its exit function is called. If this is the casevideo_openwould still be called, as the video device would still be registered, butfops_getwould fail intry_module_getand return a NULL pointer. It seems the pointer returned byfops_getshould be tested invideo_open.
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
I've CC'ed the v4l maintainer to get his opinion on this.
Sorry for being late with this. Too much work here...
I suspect that you only hit this bug due to BKL removal from open/close fops. maybe you're calling open() before having the device fully initialized?
Anyway, I think that the proposed check is interesting on other places where there are similar code.
Cheers,
Mauro
Hi Mauro,
Quoted 36 lines · Mauro Carvalho Chehab
On Thu, 16 Oct 2008 11:01:27 +0100
Quoted 33 lines · Alan Jenkins
Quoted 32 lines · Laurent Pinchart
Hi Alan,
Quoted 29 lines · Alan Jenkins
Quoted 28 lines · Laurent Pinchart
Quoted 4 lines · Alan Jenkins
If you look at the trace, it happens as "hald-probe-video" opens the video device. This is from Ubuntu 8.04. Possibly it's significant that I use the camera first, to make sure it works (I use Kopete, the settings dialogue includes a video test).
The NULL pointer (or rather
0x00000030pointer) dereference happens invideo_open:file->f_op = fops_get(vfl->fops); if (file->f_op->open) err = file->f_op->open(inode, file);
file->f_opends up being NULL. Eithervfl->fopsis NULL to begin with, orfops_getfailed to get a reference to thefile_operationsstructure.I'd be surprised if
vfl->fopswas NULL. To rule out that case, can you add aBUG_ON(vfl->fops == NULL)before the call tofops_get?I'm not too familiar with the module loader, but a quick look at the code shows that the module could be marked as being unloaded (
MODULE_STATE_GOING) before its exit function is called. If this is the casevideo_openwould still be called, as the video device would still be registered, butfops_getwould fail intry_module_getand return a NULL pointer. It seems the pointer returned byfops_getshould be tested invideo_open.
Quoted 7 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
I've CC'ed the v4l maintainer to get his opinion on this.
Sorry for being late with this. Too much work here...
I suspect that you only hit this bug due to BKL removal from open/close fops. maybe you're calling
open()before having the device fully initialized?
It's actually the other way around. open() is closed while unloading the module. As v4l is being moved to cdev the bug will go away.
Quoted 2 lines
Anyway, I think that the proposed check is interesting on other places where there are similar code.
Best regards,
Laurent Pinchart