Skip to contentSkip to conversation

How does one get the description of an errno value

DISCUSSION Angel Tsankov 7 participants 8 messages Mar 15, 2009 – Mar 16, 2009 2 messages not in the archive

lore
Share & tools
lore
#2 lore raw
In reply to Steve Graegert

Steve,

Quoted 10 lines

The following code snippet should do it. It basically sets errno manually and outputs the associated error message.

--- BEGIN ---

#define _ALL_SOURCE

#include <stdio.h>
#include <errno.h> /* for _MAX_ERRNO */

I've searched in headers on /usr/include for MAX_ERRNO but not found. Where MAX_ERRNO is defined?

A *very* simple workaround was check for "Unknown" word, so I tried:

int main(void) {
	int i=0;
	extern int errno;
	char str[128];

	while (strncmp(str,"Unknown",7)) {
		sprintf(str,"%s",strerror(i));
		fprintf(stderr, "%3d", i);
		errno = i;
		perror(" ");
		i++;
	}

	return (0);
}

But there is "Unknown" between valid error messages. I think there is a better way to do it....

Best regards,

--tm

#0 lore raw

Hello,

Is there a function which returns the description of an errno value and, if so, which is it?

Regards,
Angel Tsankov

#9 lore raw
Quoted 4 lines · Angel Tsankov

Hello,

Is there a function which returns the description of an errno value and, if so, which is it?

strerror(3)

Bert

Quoted 11 lines

Regards,
Angel Tsankov

--
To unsubscribe from this list: send the line "unsubscribe linux-c-programming" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-c-programming" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#1 lore raw
In reply to Angel Tsankov

Angel,

The following code snippet should do it. It basically sets errno manually and outputs the associated error message.

--- BEGIN ---

#define _ALL_SOURCE

#include <stdio.h>
#include <errno.h> /* for _MAX_ERRNO */

int main(void) {
	int i;
	extern int errno;
	
	for (i = 0; i < MAX_ERRNO; i++) {
		fprintf(stderr, "%3d", i);
		errno = i;
		perror(" ");
	}
	
	return (0);
}

--- END ---

\Steve

--

Steve Graegert
www.graegert.com

Quoted 10 lines · Angel Tsankov

Hello,

Is there a function which returns the description of an errno value and, if so, which is it?

Regards,
Angel Tsankov

Quoted 5 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-c-programming" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-c-programming" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
In reply to Tiago Maluta
Quoted 7 lines · Tiago Maluta

Steve,

Quoted 5 lines

The following code snippet should do it.  It basically sets errno manually and outputs the associated error message.

--- BEGIN ---

Quoted 8 lines
Quoted 5 lines

#define _ALL_SOURCE

#include <stdio.h>
#include <errno.h> /* for _MAX_ERRNO */

I've searched in headers on /usr/include for MAX_ERRNO but not found. Where MAX_ERRNO is defined?

you could define it with something like this:

#ifndef MAX_ERRNO
#define MAX_ERRNO 4095
#endif

Sergio

Quoted 20 lines

A *very* simple workaround was check for "Unknown" word, so I tried:

int main(void) {
       int i=0;
       extern int errno;
       char str[128];

       while (strncmp(str,"Unknown",7)) {
               sprintf(str,"%s",strerror(i));
               fprintf(stderr, "%3d", i);
               errno = i;
               perror(" ");
               i++;
       }

       return (0);
}

Quoted 8 lines

But there is "Unknown" between valid error messages. I think there is a better way to do it....

Best regards,

--tm

--
To unsubscribe from this list: send the line "unsubscribe linux-c-programming" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#4 lore raw
In reply to Tiago Maluta

Tiago,

You're correct. MAX_ERRNO is a custom macro being defined elsewhere and actually expands to to sys_nerr. I picked that code from some examples I've prepared some years ago. Sorry for the inconvenience but I think you get the idea. see perror(3) for more info.

\Steve

--

Steve Graegert
www.graegert.com

Quoted 35 lines · Tiago Maluta

Steve,

Quoted 10 lines

The following code snippet should do it.  It basically sets errno manually and outputs the associated error message.

--- BEGIN ---

#define _ALL_SOURCE

#include <stdio.h>
#include <errno.h> /* for _MAX_ERRNO */

I've searched in headers on /usr/include for MAX_ERRNO but not found. Where MAX_ERRNO is defined?

A *very* simple workaround was check for "Unknown" word, so I tried:

int main(void) {
       int i=0;
       extern int errno;
       char str[128];

       while (strncmp(str,"Unknown",7)) {
               sprintf(str,"%s",strerror(i));
               fprintf(stderr, "%3d", i);
               errno = i;
               perror(" ");
               i++;
       }

       return (0);
}

Quoted 9 lines

But there is "Unknown" between valid error messages. I think there is a better way to do it....

Best regards,

--tm

--
To unsubscribe from this list: send the line "unsubscribe linux-c-programming" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#7 lore raw
In reply to a message not in the archive
Quoted 5 lines · Tiago Maluta
Quoted 4 lines · Akos Marton

hi,

/usr/include/linux/err.h on my PC with the value 4095.

Quoted 7 lines
Quoted 2 lines

mAkos

What lib contains err.h?
My /usr/include/linux contains only errno.h

I'm using glibc 2.8

I'm using glibc 2.7
You can do a find in your /usr/include/ as
sh$ find /usr/include/ -name "*h" -exec cat {} + | grep MAX_ERRNO if there are some output, check which file contains this macro.

mAkos

Signature · 2 lines
People seldom notice clothes, if you wear a big smile.
OLVASD: http://napirajz.hu
#8 lore raw
In reply to Steve Graegert
Quoted 31 lines · Steve Graegert

Angel,

The following code snippet should do it. It basically sets errno manually and outputs the associated error message.

--- BEGIN ---

#define _ALL_SOURCE

#include <stdio.h>
#include <errno.h> /* for _MAX_ERRNO */

int main(void) {
       int i;
       extern int errno;

       for (i = 0; i < MAX_ERRNO; i++) {
               fprintf(stderr, "%3d", i);
               errno = i;
               perror(" ");
       }

       return (0);
}

--- END ---

\Steve

--

Quoted 15 lines

Steve Graegert
www.graegert.com

Quoted 8 lines · Angel Tsankov

Hello,

Is there a function which returns the description of an errno value and, if so, which is it?

Regards,
Angel Tsankov

A little fancier snippet that I wrote years ago to deal with programs that only output an errno number and no description is this:

/* error.c : utility for looking up errno error numbers */ /* original version: 2006 June 27
* 2006 June 29 -- version 1.04
* contributors: Jon Mayo <[email protected]>
* No copyright claimed -- Public Domain */

/* TODO: convert error strings into error numbers/names */

#include <assert.h>
#include <errno.h>
#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#define T(x) if(e==(x)) return #x

static const char **id_lookup_table;
static unsigned id_max;

static const char *err_id(int e) {

#ifdef EPERM
	T(EPERM);
#endif
#ifdef ENOENT
	T(ENOENT);
#endif
#ifdef ESRCH
	T(ESRCH);
#endif
#ifdef EINTR
	T(EINTR);
#endif
#ifdef EIO
	T(EIO);
#endif
#ifdef ENXIO
	T(ENXIO);
#endif
#ifdef E2BIG
	T(E2BIG);
#endif
#ifdef ENOEXEC
	T(ENOEXEC);
#endif
#ifdef EBADF
	T(EBADF);
#endif
#ifdef ECHILD
	T(ECHILD);
#endif
#ifdef EAGAIN
	T(EAGAIN);
#endif
#ifdef ENOMEM
	T(ENOMEM);
#endif
#ifdef EACCES
	T(EACCES);
#endif
#ifdef EFAULT
	T(EFAULT);
#endif
#ifdef ENOTBLK
	T(ENOTBLK);
#endif
#ifdef EBUSY
	T(EBUSY);
#endif
#ifdef EEXIST
	T(EEXIST);
#endif
#ifdef EXDEV
	T(EXDEV);
#endif
#ifdef ENODEV
	T(ENODEV);
#endif
#ifdef ENOTDIR
	T(ENOTDIR);
#endif
#ifdef EISDIR
	T(EISDIR);
#endif
#ifdef EINVAL
	T(EINVAL);
#endif
#ifdef ENFILE
	T(ENFILE);
#endif
#ifdef EMFILE
	T(EMFILE);
#endif
#ifdef ENOTTY
	T(ENOTTY);
#endif
#ifdef ETXTBSY
	T(ETXTBSY);
#endif
#ifdef EFBIG
	T(EFBIG);
#endif
#ifdef ENOSPC
	T(ENOSPC);
#endif
#ifdef ESPIPE
	T(ESPIPE);
#endif
#ifdef EROFS
	T(EROFS);
#endif
#ifdef EMLINK
	T(EMLINK);
#endif
#ifdef EPIPE
	T(EPIPE);
#endif
#ifdef EDOM
	T(EDOM);
#endif
#ifdef ERANGE
	T(ERANGE);
#endif
#ifdef EDEADLK
	T(EDEADLK);
#endif
#ifdef ENAMETOOLONG
	T(ENAMETOOLONG);
#endif
#ifdef ENOLCK
	T(ENOLCK);
#endif
#ifdef ENOSYS
	T(ENOSYS);
#endif
#ifdef ENOTEMPTY
	T(ENOTEMPTY);
#endif
#ifdef ELOOP
	T(ELOOP);
#endif
#ifdef EWOULDBLOCK
	T(EWOULDBLOCK);
#endif
#ifdef ENOMSG
	T(ENOMSG);
#endif
#ifdef EIDRM
	T(EIDRM);
#endif
#ifdef ECHRNG
	T(ECHRNG);
#endif
#ifdef EL2NSYNC
	T(EL2NSYNC);
#endif
#ifdef EL3HLT
	T(EL3HLT);
#endif
#ifdef EL3RST
	T(EL3RST);
#endif
#ifdef ELNRNG
	T(ELNRNG);
#endif
#ifdef EUNATCH
	T(EUNATCH);
#endif
#ifdef ENOCSI
	T(ENOCSI);
#endif
#ifdef EL2HLT
	T(EL2HLT);
#endif
#ifdef EBADE
	T(EBADE);
#endif
#ifdef EBADR
	T(EBADR);
#endif
#ifdef EXFULL
	T(EXFULL);
#endif
#ifdef ENOANO
	T(ENOANO);
#endif
#ifdef EBADRQC
	T(EBADRQC);
#endif
#ifdef EBADSLT
	T(EBADSLT);
#endif
#ifdef EDEADLOCK
	T(EDEADLOCK);
#endif
#ifdef EBFONT
	T(EBFONT);
#endif
#ifdef ENOSTR
	T(ENOSTR);
#endif
#ifdef ENODATA
	T(ENODATA);
#endif
#ifdef ETIME
	T(ETIME);
#endif
#ifdef ENOSR
	T(ENOSR);
#endif
#ifdef ENONET
	T(ENONET);
#endif
#ifdef ENOPKG
	T(ENOPKG);
#endif
#ifdef EREMOTE
	T(EREMOTE);
#endif
#ifdef ENOLINK
	T(ENOLINK);
#endif
#ifdef EADV
	T(EADV);
#endif
#ifdef ESRMNT
	T(ESRMNT);
#endif
#ifdef ECOMM
	T(ECOMM);
#endif
#ifdef EPROTO
	T(EPROTO);
#endif
#ifdef EMULTIHOP
	T(EMULTIHOP);
#endif
#ifdef EDOTDOT
	T(EDOTDOT);
#endif
#ifdef EBADMSG
	T(EBADMSG);
#endif
#ifdef EOVERFLOW
	T(EOVERFLOW);
#endif
#ifdef ENOTUNIQ
	T(ENOTUNIQ);
#endif
#ifdef EBADFD
	T(EBADFD);
#endif
#ifdef EREMCHG
	T(EREMCHG);
#endif
#ifdef ELIBACC
	T(ELIBACC);
#endif
#ifdef ELIBBAD
	T(ELIBBAD);
#endif
#ifdef ELIBSCN
	T(ELIBSCN);
#endif
#ifdef ELIBMAX
	T(ELIBMAX);
#endif
#ifdef ELIBEXEC
	T(ELIBEXEC);
#endif
#ifdef EILSEQ
	T(EILSEQ);
#endif
#ifdef ERESTART
	T(ERESTART);
#endif
#ifdef ESTRPIPE
	T(ESTRPIPE);
#endif
#ifdef EUSERS
	T(EUSERS);
#endif
#ifdef ENOTSOCK
	T(ENOTSOCK);
#endif
#ifdef ETOOMANYREF
	T(ETOOMANYREF);
#endif
#ifdef TADDRREQ
	T(TADDRREQ);
#endif
#ifdef EMSGSIZE
	T(EMSGSIZE);
#endif
#ifdef EPROTOTYPE
	T(EPROTOTYPE);
#endif
#ifdef ENOPROTOOPT
	T(ENOPROTOOPT);
#endif
#ifdef EPROTONOSUPPORT
	T(EPROTONOSUPPORT);
#endif
#ifdef ESOCKTNOSUPPORT
	T(ESOCKTNOSUPPORT);
#endif
#ifdef EOPNOTSUPP
	T(EOPNOTSUPP);
#endif
#ifdef EPFNOSUPPORT
	T(EPFNOSUPPORT);
#endif
#ifdef EAFNOSUPPORT
	T(EAFNOSUPPORT);
#endif
#ifdef EADDRINUSE
	T(EADDRINUSE);
#endif
#ifdef EADDRNOTAVAIL
	T(EADDRNOTAVAIL);
#endif
#ifdef ENETDOWN
	T(ENETDOWN);
#endif
#ifdef ENETUNREACH
	T(ENETUNREACH);
#endif
#ifdef ENETRESET
	T(ENETRESET);
#endif
#ifdef ECONNABORTED
	T(ECONNABORTED);
#endif
#ifdef ECONNRESET
	T(ECONNRESET);
#endif
#ifdef ENOBUFS
	T(ENOBUFS);
#endif
#ifdef EISCONN
	T(EISCONN);
#endif
#ifdef ENOTCONN
	T(ENOTCONN);
#endif
#ifdef ESHUTDOWN
	T(ESHUTDOWN);
#endif
#ifdef ETOOMANYREFS
	T(ETOOMANYREFS);
#endif
#ifdef ECONNREFUSED
	T(ECONNREFUSED);
#endif
#ifdef EHOSTDOWN
	T(EHOSTDOWN);
#endif
#ifdef EHOSTUNREACH
	T(EHOSTUNREACH);
#endif
#ifdef EALREADY
	T(EALREADY);
#endif
#ifdef EINPROGRESS
	T(EINPROGRESS);
#endif
#ifdef ESTALE
	T(ESTALE);
#endif
#ifdef EUCLEAN
	T(EUCLEAN);
#endif
#ifdef ENOTNAM
	T(ENOTNAM);
#endif
#ifdef ENAVAIL
	T(ENAVAIL);
#endif
#ifdef EISNAM
	T(EISNAM);
#endif
#ifdef EREMOTEIO
	T(EREMOTEIO);
#endif
#ifdef EDQUOT
	T(EDQUOT);
#endif
#ifdef ENOMEDIUM
	T(ENOMEDIUM);
#endif
#ifdef EMEDIUMTYPE
	T(EMEDIUMTYPE);
#endif
#ifdef ECANCELED
	T(ECANCELED);
#endif
#ifdef ENOKEY
	T(ENOKEY);
#endif
#ifdef EKEYEXPIRED
	T(EKEYEXPIRED);
#endif
#ifdef EKEYREVOKED
	T(EKEYREVOKED);
#endif
#ifdef EKEYREJECTED
	T(EKEYREJECTED);
#endif
	return 0;
}

/* attempt to guess the largest error value. assume gaps of 100 means that's the end of the list of errors */

static int guess_max(void) {
	int i;
	int miss_count;
	for(i=0,miss_count=0;i<INT_MAX;i++) {
		if(err_id(i)) {
			miss_count=0;
		} else {
			miss_count++;
			if(miss_count>100) break;
		}
	}
	return i-miss_count;
}
static void init_id_lookup_table(void) {
	int i;
	id_max=guess_max();
	id_lookup_table=calloc(sizeof *id_lookup_table, id_max+1);
	for(i=0;i<=id_max;i++) {
		id_lookup_table[i]=err_id(i);
	}
}
static int lookup_id_str(const char *str) {
	int i;
	assert(id_lookup_table!=NULL);
	assert(id_max>0);
	for(i=0;i<=id_max;i++) {
		if(id_lookup_table[i] && !strcmp(str, id_lookup_table[i])) {
			return i;
		}
	}
	return -1;
}
static void show_error(int e) {
	const char *id;
	id=err_id(e);
	if(!id) id="???";
	printf("%d:%s:%s\n", e, id, strerror(e));
}
int main(int argc, char **argv) {
	if(argc==1) {
		int max;
		max=guess_max();
		printf("max error: %d\n", max);
	} else {
		int i;
		init_id_lookup_table();
		for(i=1;i<argc;i++) {
			int e;
			char *endptr;
			e=strtol(argv[i],&endptr,10);
			if(!endptr || *endptr) {
				e=lookup_id_str(argv[i]);
				if(e<0) {
					fprintf(stderr, "error '%s' unknown.\n", argv[i]);
					continue;
				}
			}
			if(e<0) e=-e;
			show_error(e);
		}
	}
	return 0;
}

/** END **/

Signature · 2 lines
Jon Mayo
<[email protected]>