Skip to contentSkip to conversation

add support for C5000 thermostimulator

PATCH New Giulio Benetti 2 participants 2 messages Jun 18, 2009 – Jul 19, 2009 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 add support for C5000 thermostimulator

Based on at91sam9263.
It is a thermostimulator for hair styling.
Subsection of
Software is based on at91sam9263ek one.

Signed-off-by giulio.benetti at micronovasrl.com
board/micronova/c5000/c5000.c 2009-06-18 12:57:52.000000000 +0200 renamed from board/micronova/c5000/c5000.c 1970-01-01 01:00:00.000000000 +0100 +43 -0
diff -urpN b/board/micronova/c5000/c5000.c a/board/micronova/c5000/c5000.c
@@ -0,0 +1,194 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <[email protected]>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Giulio Benetti <[email protected]>
+ * Micronova srl <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam9263_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* -------------------------------------------------------------------------

*/
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void c5000_serial_hw_init(void)
+{

+       at91_set_A_periph(AT91_PIN_PC30, 0);            /* DRXD */
+       at91_set_A_periph(AT91_PIN_PC31, 1);            /* DTXD */
+       at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);

+}
+
+static void c5000_nand_hw_init(void)
+{
+ unsigned long csa;
+

+       /* Enable CS3 */
+       csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+       at91_sys_write(AT91_MATRIX_EBI0CSA,

+ csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),

+                      AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+                      AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+       at91_sys_write(AT91_SMC_PULSE(3),
+                      AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+                      AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+       at91_sys_write(AT91_SMC_CYCLE(3),
+                      AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+       at91_sys_write(AT91_SMC_MODE(3),
+                      AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+                      AT91_SMC_EXNWMODE_DISABLE |
+                      AT91_SMC_DBW_8 |
+                      AT91_SMC_TDF_(2));

+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA |
+ 1 << AT91SAM9263_ID_PIOCDE);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(AT91_PIN_PA22, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(AT91_PIN_PD15, 1);
+}
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void c5000_spi_hw_init(void)
+{
+ at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
+

+       at91_set_B_periph(AT91_PIN_PA0, 0);     /* SPI0_MISO */
+       at91_set_B_periph(AT91_PIN_PA1, 0);     /* SPI0_MOSI */
+       at91_set_B_periph(AT91_PIN_PA2, 0);     /* SPI0_SPCK */

+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
+}
+#endif
+
+vidinfo_t panel_info = {

+       vl_col:         640,
+       vl_row:         480,
+       vl_clk:         25000000,
+       vl_sync:        ATMEL_LCDC_INVLINE_INVERTED |
+                       ATMEL_LCDC_INVFRAME_INVERTED,
+       vl_bpix:        3,
+       vl_tft:         1,
+       vl_hsync_len:   4,
+       vl_left_margin: 16,
+       vl_right_margin:8,
+       vl_vsync_len:   1,
+       vl_upper_margin:8,
+       vl_lower_margin:5,
+       mmio:           AT91SAM9263_LCDC_BASE,

+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power down */
+}
+
+static void c5000_lcd_hw_init(void)
+{

+       at91_set_A_periph(AT91_PIN_PC1, 0);     /* LCDHSYNC */
+       at91_set_A_periph(AT91_PIN_PC2, 0);     /* LCDDOTCK */
+       at91_set_A_periph(AT91_PIN_PC3, 0);     /* LCDDEN */
+       at91_set_B_periph(AT91_PIN_PB9, 0);     /* LCDCC */
+       at91_set_A_periph(AT91_PIN_PC6, 0);     /* LCDD2 */
+       at91_set_A_periph(AT91_PIN_PC7, 0);     /* LCDD3 */
+       at91_set_A_periph(AT91_PIN_PC8, 0);     /* LCDD4 */
+       at91_set_A_periph(AT91_PIN_PC9, 0);     /* LCDD5 */
+       at91_set_A_periph(AT91_PIN_PC10, 0);    /* LCDD6 */
+       at91_set_A_periph(AT91_PIN_PC11, 0);    /* LCDD7 */
+       at91_set_A_periph(AT91_PIN_PC14, 0);    /* LCDD10 */
+       at91_set_A_periph(AT91_PIN_PC15, 0);    /* LCDD11 */
+       at91_set_A_periph(AT91_PIN_PC16, 0);    /* LCDD12 */
+       at91_set_B_periph(AT91_PIN_PC12, 0);    /* LCDD13 */
+       at91_set_A_periph(AT91_PIN_PC18, 0);    /* LCDD14 */
+       at91_set_A_periph(AT91_PIN_PC19, 0);    /* LCDD15 */
+       at91_set_A_periph(AT91_PIN_PC22, 0);    /* LCDD18 */
+       at91_set_A_periph(AT91_PIN_PC23, 0);    /* LCDD19 */
+       at91_set_A_periph(AT91_PIN_PC24, 0);    /* LCDD20 */
+       at91_set_B_periph(AT91_PIN_PC17, 0);    /* LCDD21 */
+       at91_set_A_periph(AT91_PIN_PC26, 0);    /* LCDD22 */
+       at91_set_A_periph(AT91_PIN_PC27, 0);    /* LCDD23 */

+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+
+ gd->fb_base = PHYS_SDRAM + 0x3FB5000; /* mapped into sdram @ 0x20000000 +
(64 MByte - (640x480) 8bpp) */
+}
+
+static void c5000_set_rst(void)
+{
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+ (AT91_RSTC_ERSTL & (0x0E << 8)) |
+ AT91_RSTC_URSTEN);
+}
+
+int board_init(void)
+{
+ c5000_set_rst();
+
+ /* Enable Ctrlc */
+ console_init_f();
+

+       /* arch number of C5000-Board */
+       gd->bd->bi_arch_number = MACH_TYPE_C5000;
+       /* adress of boot parameters */
+       gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

+
+ c5000_serial_hw_init();
+ c5000_nand_hw_init();
+#ifdef CONFIG_HAS_DATAFLASH
+ c5000_spi_hw_init();
+#endif
+ c5000_lcd_hw_init();
+
+ return 0;
+}
+
+int dram_init(void)
+{

+       gd->bd->bi_dram[0].start = PHYS_SDRAM;
+       gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+       return 0;

+}
diff -urpN b/board/micronova/c5000/config.mk
a/board/micronova/c5000/config.mk

board/micronova/c5000/config.mk 2009-06-18 12:55:19.000000000 +0200 renamed from board/micronova/c5000/config.mk 1970-01-01 01:00:00.000000000 +0100 +1 -0
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
board/micronova/c5000/Makefile 2009-06-18 12:55:19.000000000 +0200 renamed from board/micronova/c5000/Makefile 1970-01-01 01:00:00.000000000 +0100 +56 -0

56 lines not on this page · raw message

board/micronova/c5000/nand.c 2009-06-18 16:49:04.000000000 +0200 renamed from board/micronova/c5000/nand.c 1970-01-01 01:00:00.000000000 +0100 +75 -0

75 lines not on this page · raw message

diff -urpN b/board/micronova/c5000/partition.c
a/board/micronova/c5000/partition.c

board/micronova/c5000/partition.c 2009-06-18 16:50:06.000000000 +0200 renamed from board/micronova/c5000/partition.c 1970-01-01 01:00:00.000000000 +0100 +37 -0
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+       {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},       /* Logical adress, CS */
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+       {0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
+       {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+       {0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
+};
include/configs/c5000.h 2009-06-18 17:06:07.000000000 +0200 renamed from include/configs/c5000.h 1970-01-01 01:00:00.000000000 +0100 +121 -0

121 lines not on this page · raw message

CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4200
+
+#else /* CONFIG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND 1

+#define CONFIG_ENV_OFFSET              0x60000
+#define CONFIG_ENV_OFFSET_REDUND       0x80000
+#define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */

+
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+

+#define CONFIG_SYS_PROMPT              "U-Boot> "
+#define CONFIG_SYS_CBSIZE              256
+#define CONFIG_SYS_MAXARGS             16
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) +

16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,
0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#define CONFIG_AT91SAM9_WATCHDOG
+#define CONFIG_HW_WATCHDOG
+
+#endif

Makefile 2009-06-18 12:55:19.000000000 +0200 renamed from Makefile 2009-06-14 21:30:39.000000000 +0200 +3 -0
diff -urpN b/Makefile a/Makefile
@@ -2752,6 +2752,9 @@ at91sam9rlek_config       :       unconfig
 pm9263_config  :       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
+c5000_config   :       unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs c5000 micronova at91
+
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
 integratorap_config    \
Signature · 3 lines
Giulio Benetti
R&D
Micronova srl
#1 lore raw

PATCH 1/1 add support for C5000 thermostimulator

Dear Giulio Benetti,

Quoted 6 lines · In message <[email protected]> you wrote:

Based on at91sam9263.
It is a thermostimulator for hair styling.
Subsection of
Software is based on at91sam9263ek one.

Signed-off-by giulio.benetti at micronovasrl.com

Please use git-format-patch to prepare patches.

Entries for MAINTAINERS and MAKEALL files are missing.

Please use TABs (instead of spaces) for vertical alignment.

Quoted 3 lines

diff -urpN b/board/micronova/c5000/c5000.c a/board/micronova/c5000/c5000.c

board/micronova/c5000/c5000.c 2009-06-18 12:57:52.000000000 +0200 renamed from board/micronova/c5000/c5000.c 1970-01-01 01:00:00.000000000 +0100 +0 -0

...

Quoted 4 lines
board/micronova/c5000/c5000.c 2009-06-18 12:57:52.000000000 +0200 renamed from board/micronova/c5000/c5000.c 1970-01-01 01:00:00.000000000 +0100 +3 -0
+       at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+
+       gd->fb_base = PHYS_SDRAM + 0x3FB5000; /* mapped into sdram @ 0x20000000 +

(64 MByte - (640x480) 8bpp) */

Line too long. Please fix globally.

board/micronova/c5000/c5000.c 2009-06-18 12:57:52.000000000 +0200

Quoted 6 lines
board/micronova/c5000/c5000.c 2009-06-18 12:57:52.000000000 +0200 renamed from board/micronova/c5000/c5000.c 1970-01-01 01:00:00.000000000 +0100 +6 -0
+int dram_init(void)
+{
+       gd->bd->bi_dram[0].start = PHYS_SDRAM;
+       gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+       return 0;
+}

How about using get_ram_size() for auto-sizing and memory testing?

board/micronova/c5000/config.mk 2009-06-18 12:55:19.000000000 +0200 line 1

Quoted 6 lines

diff -urpN b/board/micronova/c5000/config.mk
a/board/micronova/c5000/config.mk

board/micronova/c5000/config.mk 2009-06-18 12:55:19.000000000 +0200 renamed from board/micronova/c5000/config.mk 1970-01-01 01:00:00.000000000 +0100 +1 -0
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000

Copyright entry missing.

Makefile 2009-06-18 12:55:19.000000000 +0200 at91sam9rlek_config : unconfig · line 2757

Quoted 10 lines

diff -urpN b/Makefile a/Makefile

Makefile 2009-06-18 12:55:19.000000000 +0200 renamed from Makefile 2009-06-14 21:30:39.000000000 +0200 +3 -0
@@ -2752,6 +2752,9 @@ at91sam9rlek_config       :       unconfig
 pm9263_config  :       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
+c5000_config   :       unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs c5000 micronova at91
+

Please keep lists sorted.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
######## This message was made from 100% recycled electrons. ########