Skip to contentSkip to conversation

Failure building default config for ARM integrator

Buildroot Grant Edwards 2 participants 2 messages Dec 16, 2009

lore
Share & tools
lore
#0 lore raw

I'm trying to build the default config for the ARM integrator target. [It's the same architecture as my board, and it's supported by Qemu, so it's a useful testbed.] It fails when it tries to build U-Boot. I don't really care about building U-Boot, so I could just deselect it.

However, if it's considered a bug when a "defconfig" target doesn't "just build", then I'll try to fix it and submit a patch. Is this something that needs to be fixed, or is it normal?

 $ git clone git://git.buildroot.net/buildroot
 $ cd buildroot
 $ make integrator926_defconfig

[...]
[hit <enter> to accept default answers to a bunch of config questions] [...]

 $ make

[...]
[hit <enter> to accept default answers to more config questions] [...]

make[1]: Entering directory /home/grante/buildroot-git/buildroot/output/build/u-boot-2009.08' make[1]: *** No rule to make target integrator926_config'. Stop.
make[1]: Leaving directory `/home/grante/buildroot-git/buildroot/output/build/u-boot-2009.08'
make: *** [/home/grante/buildroot-git/buildroot/output/build/u-boot-2009.08/.configured] Error 2

Signature · 3 lines
Grant Edwards                   grante             Yow! I smell like a wet
                                  at               reducing clinic on Columbus
                               visi.com            Day!
#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Grant" == Grant Edwards <[email protected]> writes:

Hi,

Grant> I'm trying to build the default config for the ARM integrator Grant> target. [It's the same architecture as my board, and it's Grant> supported by Qemu, so it's a useful testbed.] It fails when it Grant> tries to build U-Boot. I don't really care about building Grant> U-Boot, so I could just deselect it.

Grant> However, if it's considered a bug when a "defconfig" target Grant> doesn't "just build", then I'll try to fix it and submit a Grant> patch. Is this something that needs to be fixed, or is it Grant> normal?

No, it's a bug.

Grant> $ git clone git://git.buildroot.net/buildroot

Grant> $ cd buildroot

Grant> $ make integrator926_defconfig

Grant> make[1]: Entering directory /home/grante/buildroot-git/buildroot/output/build/u-boot-2009.08' Grant> make[1]: *** No rule to make target integrator926_config'. Stop.

So u-boot doesn't have an integrator926 configuration.

It has:

git grep -A10 integrator v2009.08 -- Makefile

v2009.08:Makefile-ap922_XA10_config     \
v2009.08:Makefile-ap7_config            \
v2009.08:Makefile-ap720t_config         \
v2009.08:Makefile-ap920t_config         \

v2009.08:Makefile-ap926ejs_config \
v2009.08:Makefile-ap946es_config: unconfig
v2009.08:Makefile: @board/armltd/integrator/split_by_variant.sh ap $@
v2009.08:Makefile-

v2009.08:Makefile:integratorcp_config   \
v2009.08:Makefile-cp_config             \
v2009.08:Makefile-cp920t_config         \
v2009.08:Makefile-cp926ejs_config               \
v2009.08:Makefile-cp946es_config                \
v2009.08:Makefile-cp1136_config         \
v2009.08:Makefile-cp966_config          \
v2009.08:Makefile-cp922_config          \
v2009.08:Makefile-cp922_XA10_config     \

v2009.08:Makefile-cp1026_config: unconfig

I don't remember what the difference is between the ap and cp baseboards, but I guess the right config is something like cp926ejs_config

The setting to change is BR2_TARGET_UBOOT_BOARDNAME.

Signature · 1 line
Bye, Peter Korsgaard