qemu-kvm 0.12.0-rc2: can't install windows 2008 std

DISCUSSION Thomas Mueller 3 participants 7 messages Dec 20, 2009 KVM

Share & tools

Avi Kivity

2009-12-20 14:25 UTC #1 lore raw

Quoted 6 lines · Thomas Mueller

after having problems with qemu-kvm 0.11.0 and windows 2008 under i/o I thought trying the new 0.12.0-rc2 and make some tests.
so i've compiled qemu-kvm 0.12.0-rc2 and tried to install Windows 2008 Standard 64bit.

Quoted 7 lines

it shows the "Windows is loading files" screen and then BSOD with 0x0000007E . I tried if=ide and if=scsi. none of them are working. at least with qemu-kvm 0.11.0 this was working.
booting an existing WinXP guest or a linux live cd (sysresccd) is working with 0.12.0-rc2

How large is your disk? The Internet indicates this error may occur if you run out of disk space during install.

Signature · 1 line

error compiling committee.c: too many arguments to function

Gleb Natapov

2009-12-20 14:38 UTC #2 lore raw

Quoted 11 lines · Avi Kivity

Quoted 10 lines · Thomas Mueller
after having problems with qemu-kvm 0.11.0 and windows 2008 under i/o I thought trying the new 0.12.0-rc2 and make some tests.
so i've compiled qemu-kvm 0.12.0-rc2 and tried to install Windows 2008 Standard 64bit.
it shows the "Windows is loading files" screen and then BSOD with 0x0000007E . I tried if=ide and if=scsi. none of them are working. at least with qemu-kvm 0.11.0 this was working.

Quoted 6 lines

Quoted 2 lines
booting an existing WinXP guest or a linux live cd (sysresccd) is working with 0.12.0-rc2
How large is your disk? The Internet indicates this error may occur if you run out of disk space during install.

Does BSOD looks like the one attached to this bug report?
http://sourceforge.net/tracker/?func=detail&atid=893831&aid=2902983&group_id=180599

If yes, make sure you reinstalled BIOS image.

--
Gleb.

Thomas Mueller

author

2009-12-20 14:43 UTC #4 lore raw

In reply to Avi Kivity

Am Sun, 20 Dec 2009 16:25:35 +0200 schrieb Avi Kivity:

Quoted 11 lines · Thomas Mueller

Quoted 10 lines
after having problems with qemu-kvm 0.11.0 and windows 2008 under i/o I thought trying the new 0.12.0-rc2 and make some tests.
so i've compiled qemu-kvm 0.12.0-rc2 and tried to install Windows 2008 Standard 64bit.
it shows the "Windows is loading files" screen and then BSOD with 0x0000007E . I tried if=ide and if=scsi. none of them are working. at least with qemu-kvm 0.11.0 this was working.

Quoted 6 lines

Quoted 4 lines
booting an existing WinXP guest or a linux live cd (sysresccd) is working with 0.12.0-rc2
How large is your disk? The Internet indicates this error may occur if you run out of disk space during install.

the disk is 20G .

the "windows is loading files" screen ist the first screen in black/white when booting from cd/dvd. after that it would switch to the next screen where you have to choose the language *. So there isn't even the disk involved yet. I only can think of that the win-setup can't access the cd/ dvd drive at this stage.

screenshots:
http://chaschperli.ch/screenshot-loadingfiles.png
http://chaschperli.ch/screenshot-bsod-win2008.png

- Thomas

* http://osdp.bplaced.net/de/screen_gallery.php?bsgfx=microsoft/server/
windows-server-2008-scr-01.jpg

Thomas Mueller

author

2009-12-20 14:48 UTC #3 lore raw

In reply to Gleb Natapov

Am Sun, 20 Dec 2009 16:37:59 +0200 schrieb Gleb Natapov:

Quoted 12 lines · Avi Kivity

Quoted 11 lines · Thomas Mueller
Quoted 10 lines
after having problems with qemu-kvm 0.11.0 and windows 2008 under i/o I thought trying the new 0.12.0-rc2 and make some tests.
so i've compiled qemu-kvm 0.12.0-rc2 and tried to install Windows 2008 Standard 64bit.
it shows the "Windows is loading files" screen and then BSOD with 0x0000007E . I tried if=ide and if=scsi. none of them are working. at least with qemu-kvm 0.11.0 this was working.

Quoted 8 lines

Quoted 6 lines
Quoted 2 lines
booting an existing WinXP guest or a linux live cd (sysresccd) is working with 0.12.0-rc2
How large is your disk? The Internet indicates this error may occur if you run out of disk space during install.
Does BSOD looks like the one attached to this bug report?
http://sourceforge.net/tracker/?

func=detail&atid=893831&aid=2902983&group_id=180599

Quoted 2 lines

If yes, make sure you reinstalled BIOS image.

it does look similiar, but the ACPI line is missing. my screenshot:

http://chaschperli.ch/screenshot-bsod-win2008.png

i've remove all kvm files and installed again, the problem consists.

- Thomas

Avi Kivity

2009-12-20 15:52 UTC #5 lore raw

In reply to Thomas Mueller

Quoted 15 lines · Thomas Mueller

after having problems with qemu-kvm 0.11.0 and windows 2008 under i/o I thought trying the new 0.12.0-rc2 and make some tests.
so i've compiled qemu-kvm 0.12.0-rc2 and tried to install Windows 2008 Standard 64bit.
it shows the "Windows is loading files" screen and then BSOD with 0x0000007E . I tried if=ide and if=scsi. none of them are working. at least with qemu-kvm 0.11.0 this was working.
booting an existing WinXP guest or a linux live cd (sysresccd) is working with 0.12.0-rc2
kvm cmd:

Quoted 11 lines

  kvm \
	-usbdevice tablet \
	-drive file=drive1.raw,cache=none,if=ide,boot=on  \
	-net nic,model=e1000 -net user \
	-k de-ch -m 2048 \
	-smp 2 -monitor stdio \
	-localtime -drive file=win2008.iso,media=cdrom,if=ide

I can't reproduce this with your command line.

What Windows version is this (2008, 2008 r2, x86, x64)? What's your host cpu type? And what's your kvm version?

Does -smp 1 work?

Signature · 1 line

error compiling committee.c: too many arguments to function

Thomas Mueller

author

2009-12-20 18:47 UTC #6 lore raw

Am Sun, 20 Dec 2009 17:52:11 +0200 schrieb Avi Kivity:

Quoted 16 lines · Thomas Mueller

Quoted 6 lines
after having problems with qemu-kvm 0.11.0 and windows 2008 under i/o I thought trying the new 0.12.0-rc2 and make some tests.
so i've compiled qemu-kvm 0.12.0-rc2 and tried to install Windows 2008 Standard 64bit.
Quoted 9 lines
it shows the "Windows is loading files" screen and then BSOD with 0x0000007E . I tried if=ide and if=scsi. none of them are working. at least with qemu-kvm 0.11.0 this was working.
booting an existing WinXP guest or a linux live cd (sysresccd) is working with 0.12.0-rc2

Quoted 6 lines

I can't reproduce this with your command line.
What Windows version is this (2008, 2008 r2, x86, x64)? What's your host cpu type? And what's your kvm version?
Does -smp 1 work?

I used:
kernel 2.6.30.2
qemu-kvm 0.12.0-rc2
processor: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
os: windows 2008 standard 64bit english

I switched now to:
kernel 2.6.32
qemu-kvm 0.12.1

now i don't get the BSOD anymore.

so now I can go on and do i/o tests. :)

thanks!

- Thomas