Mounting UBIFS readonly - is it really readonly?
Hi,
I hope someone can help me to resolve the following mystery.
I'm using UBIFS as the root filesystem always mounted readonly. The kernel boot parameters are:
console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs ro loglevel=6
As you can see, there is "ro", which causes UBIFS to be initially mounted readonly. And later it is *never* remounted read-write. Everything seems to work as expected (I get "Read-only file system" error upon a write attempt) except one thing. Somehow the modification time of /dev/console is updated every time the system boots. Note: I'm not talking about the /dev/console located inside the /dev mount (which is tmpfs and is obvously writable), I'm talking about the /dev/console located on the root file system and accessed (probably by init) before /dev is mounted. I'm really puzzled. How is this possible? The root filesystem has been readonly all the time and still the timestamp is somehow updated. Does anyone have an idea what might be going on there?
I'm using kernel 2.6.33.6 and classic sysvinit-2.86.
Thanks and regards,
Sergei.
Quoted 20 lines · Sergei Zhirikov
I hope someone can help me to resolve the following mystery.
I'm using UBIFS as the root filesystem always mounted readonly. The kernel boot parameters are:
console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs ro loglevel=6As you can see, there is "ro", which causes UBIFS to be initially mounted readonly. And later it is *never* remounted read-write. Everything seems to work as expected (I get "Read-only file system" error upon a write attempt) except one thing. Somehow the modification time of
/dev/consoleis updated every time the system boots. Note: I'm not talking about the/dev/consolelocated inside the /dev mount (which is tmpfs and is obvously writable), I'm talking about the/dev/consolelocated on the root file system and accessed (probably by init) before /dev is mounted. I'm really puzzled. How is this possible? The root filesystem has been readonly all the time and still the timestamp is somehow updated. Does anyone have an idea what might be going on there?
Quoted 1 line
I'm using kernel 2.6.33.6 and classic sysvinit-2.86.
Hi,
very brief comment as I have not time now, sorry. Try to hack UBIFS and add prints to the following functions:
ubifs_remount_rw()mount_ubifs(), print if 'mounted_read_only != 0'
this way you will check whether UBIFS is really always RO.
Also, add a print to 'ubifs_write_inode()' to make sure no inodes are ever written. Actually, there is already a 'dbg_gen()' print, just turn it into
printk(KERN_CRIT "inode %lu, mode %#x, nlink %u\n",
inode->i_ino, (int)inode->i_mode, inode->i_nlink);
Also, add a print in 'ubifs_iget()' and print the timestamp there. Do this after 'ubifs_tnc_lookup()'. Print timestamp there. You can even find out inode number for /dev/console, and print this only for this inode number.
This way you will see what is actually going on in UBIFS and prove that there is an UBIFS bug, if there is.
Signature · 2 lines
Best Regards, Artem Bityutskiy (Артём Битюцкий)
Quoted 4 lines · Sergei Zhirikov
As you can see, there is "ro", which causes UBIFS to be initially mounted readonly. And later it is *never* remounted read-write. Everything seems to work as expected (I get "Read-only file system" error upon a write attempt) except one thing. Somehow the modification
Quoted 8 lines
time of
/dev/consoleis updated every time the system boots. Note: I'm not talking about the/dev/consolelocated inside the /dev mount (which is tmpfs and is obvously writable), I'm talking about the/dev/consolelocated on the root file system and accessed (probably by init) before /dev is mounted. I'm really puzzled. How is this possible? The root filesystem has been readonly all the time and still the timestamp is somehow updated. Does anyone have an idea what might be going on there?
Did you solve the issue, I'm just curious.
Signature · 2 lines
Best Regards, Artem Bityutskiy (Артём Битюцкий)
Quoted 14 lines · Artem Bityutskiy
Quoted 4 lines · Sergei Zhirikov
As you can see, there is "ro", which causes UBIFS to be initially mounted readonly. And later it is *never* remounted read-write. Everything seems to work as expected (I get "Read-only file system" error upon a write attempt) except one thing. Somehow the modification
Quoted 8 lines
time of
/dev/consoleis updated every time the system boots. Note: I'm not talking about the/dev/consolelocated inside the /dev mount (which is tmpfs and is obvously writable), I'm talking about the/dev/consolelocated on the root file system and accessed (probably by init) before /dev is mounted. I'm really puzzled. How is this possible? The root filesystem has been readonly all the time and still the timestamp is somehow updated. Does anyone have an idea what might be going on there?
Quoted 1 line
Did you solve the issue, I'm just curious.
I think you can use inotify to verify whether the FS is ever changed?
http://en.wikipedia.org/wiki/Inotify
Signature · 2 lines
Best Regards, Artem Bityutskiy (Артём Битюцкий)
Quoted 31 lines
From: Artem Bityutskiy <[email protected]>
Subject: Re: Mounting UBIFS readonly - is it really readonly?
To: "Sergei Zhirikov" <[email protected]>
Cc: [email protected]
Date: Monday, August 23, 2010, 2:41 PMQuoted 1 line · Artem Bityutskiy
On Tue, 2010-07-27 at 21:05 +0200, Sergei Zhirikov
Quoted 1 line · wrote:
Quoted 1 line
As you can see, there is "ro", which causes UBIFS
to be initially
Quoted 1 line
Quoted 1 line
mounted readonly. And later it is *never*
remounted read-write.
Quoted 1 line
Quoted 1 line
Everything seems to work as expected (I get
"Read-only file system"
Quoted 1 line
Quoted 1 line
error upon a write attempt) except one thing.
Somehow the modification
Quoted 1 line
Quoted 1 line
time of
/dev/consoleis updated every time thesystem boots. Note: I'm
Quoted 1 line
Quoted 1 line
not talking about the
/dev/consolelocated insidethe /dev mount
Quoted 1 line
Quoted 1 line
(which is tmpfs and is obvously writable), I'm
talking about
Quoted 1 line
Quoted 1 line
the
/dev/consolelocated on the root file systemand accessed
Quoted 1 line
Quoted 1 line
(probably by init) before /dev is mounted. I'm
really puzzled. How is
Quoted 1 line
Quoted 1 line
this possible? The root filesystem has been
readonly all the time and
Quoted 1 line
Quoted 1 line
still the timestamp is somehow updated. Does
anyone have an idea what
Quoted 9 lines
Quoted 3 lines
Quoted 1 line
might be going on there?
Did you solve the issue, I'm just curious.
I think you can use inotify to verify whether the FS is ever changed?
I made the changes you suggested earlier to see if/when something is written and the results were quite unexpected. Just as I assumed, UBIFS remains mounted read-only all the time. But contrary to what I expected, none of the functions related to writing is ever called. Nevertheless, the timestamp still changes.
I have also managed to reproduce the issue without involving system reboot. If I create a device node equivalent to /dev/console (major 5, minor 1) in any directory (on the root UBIFS) and then remount the FS read-only, the timestamp of the device node keeps changing upon any write operation to the device. The same thing happens when I try /dev/tty (major 5, minor 0), but with /dev/null (1,3) or /dev/zero (1,5) the timestamp does not change.
I'm now even more puzzled than I was in the beginning. It looks like the VFS decides to update the timestamp for some reason, but does not pass that change to UBIFS (perhaps, because it knows the latter is read-only). So the updated timestamp exists only cached in memory and is never actually written to the FS. I haven't tried to verify that theory yet (which shouldn't be difficult).
--
Sergei.
Quoted 6 lines · Sergei Zhirikov
I made the changes you suggested earlier to see if/when something is written and the results were quite unexpected. Just as I assumed, UBIFS remains mounted read-only all the time. But contrary to what I expected, none of the functions related to writing is ever called. Nevertheless, the timestamp still changes.
Quoted 7 lines
I have also managed to reproduce the issue without involving system reboot. If I create a device node equivalent to
/dev/console(major 5, minor 1) in any directory (on the root UBIFS) and then remount the FS read-only, the timestamp of the device node keeps changing upon any write operation to the device. The same thing happens when I try/dev/tty(major 5, minor 0), but with/dev/null(1,3) or/dev/zero(1,5) the timestamp does not change.
This suggests this is not VFS but tty-specific.
Quoted 6 lines
I'm now even more puzzled than I was in the beginning. It looks like the VFS decides to update the timestamp for some reason, but does not pass that change to UBIFS (perhaps, because it knows the latter is read-only). So the updated timestamp exists only cached in memory and is never actually written to the FS. I haven't tried to verify that theory yet (which shouldn't be difficult).
It's late here and I'm heading to the bed, but while passing by my computer I've quickly took a look and I can see the following in drivers/char/tty_io.c:
tty_write() cales do_tty_write() which changes mtime:
inode->i_mtime = current_fs_time(inode->i_sb);
So it looks like this is a feature - ever write to /dev/console changes mtime. It looks like [amc]time for device nodes are not always FS inode times, but they may belong to the _driver_ which is represented by the character device. I guess tty is just very special and this might be just legacy stuff.
I might be mistaking though, good night :-)
Artem.