Skip to contentSkip to conversation

az6027: Terratec S7 has no signal on S2-transponders

DISCUSSION Oliver Freyermuth 1 participant 1 message May 14, 2011 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi all,

I use a Terratec S7 MKII with dvb_usb_az6027. DVB-S channels are working fine, but when trying to lock on DVB-S2 channels, the signal level drops to zero.

Google and Windows told me this problem is not limited to me, and trying out s2-liplianin, in-kernel drivers of 2.6.38 and media-build.git did not help.

As I have this hardware and C-knowledge here, I offer any help that might be needed in tracking down the problem. If there is something like an USB-trace/-sniffing to do (device works fine in Windows-VM), a "RTFM" with an URL would be fine.

Furthermore, scanning Astra S19E2 takes ~90min with w_scan, as compared to 3-5min on Windows, so there appears to be also some problem tuning-related for DVB-S.

-----
If this is the wrong place to ask, please ignore the message and direct me somewhere else.
-----

All help is very much appreciated!

Thx