Skip to contentSkip to conversation

networking support in u-boot for beagle-xm rev c

DISCUSSION Robert Berger 1 participant 1 message Sep 28, 2011

lore
Share & tools
lore
#0 lore raw

Hi,

I just built with a pretty recent version (commit e3c5d7a90ae179af0ac128ea4dfc1a5a6602c2e4) of core-image-sato-sdk-beagleboard and I'm running it on my beagle-xm rev c.

At the moment it does not seem to do much about networking from u-boot:

Texas Instruments X-Loader 1.5.0 (Sep 28 2011 - 02:50:26) Beagle xM
Reading boot sector
Loading u-boot.bin from mmc

U-Boot 2011.06 (Sep 28 2011 - 02:54:31)

OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND

I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0

*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial

Beagle unknown 0x02
No EEPROM on expansion board
Die ID #1c0400229ff800000163810c0f033025
Hit any key to stop autoboot: 0
OMAP3 beagleboard.org # sete ipaddr 192.168.5.3; sete serverip 192.168.5.5; sete netmask 255.255.255.0; usb start (Re)start USB...
USB:

--- and here we get stuck ---

If I remember well Koen has some u-boot under his git repo, which also contains networking support from within u-boot.

Are there any plan to include something like this with the official release?

Regards,

Robert..."Developing software is difficult. It is difficult primarily because the "ether" of software - the material of it's existance - is complexity itself."

My public pgp key is available at:
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x90320BF1