Skip to contentSkip to conversation

ttySAC0 or ttyS0 in 3.6.x ARM Linux?

DISCUSSION woody 3 participants 5 messages Nov 15, 2012 – Nov 16, 2012

lore
Share & tools
lore

woody

author
#0 lore raw

Hi,

In the 3.6.6 ARM kernel, should I use ttySAC0 or ttyS0 to specify the 'console' kernel command line?

Thanks.

Signature · 2 lines
woody
I can't go back to yesterday - because I was a different person then.
#1 lore raw
Quoted 1 line · woody

Hi,

Hi,

Quoted 2 lines

In the 3.6.6 ARM kernel, should I use ttySAC0 or ttyS0 to specify the 'console' kernel command line?

it depends on the driver used for your console. ttySAC is Samsung. which kind of uart do you have?

Regards,
Domenico

author
#2 lore raw

? 2012-11-15 PM9:40?"Domenico Andreoli" <[email protected]>???

Quoted 6 lines · woody
Quoted 1 line

Hi,

Hi,

Quoted 8 lines
Quoted 2 lines

In the 3.6.6 ARM kernel, should I use ttySAC0 or ttyS0 to specify the 'console' kernel command line?

it depends on the driver used for your console. ttySAC is Samsung. which kind of uart do you have?

Regards,
Domenico

It's a Samsung CPU, s3c2410. How do I check which driver I used in my kernel config? I started from s3c2410_defconfig.

I am sure it is ttySAC0 in my 2.6.36 configuration. Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121116/070bd3c2/attachment-0001.html>

#3 lore raw
In reply to woody
Quoted 2 lines · woody

In the 3.6.6 ARM kernel, should I use ttySAC0 or ttyS0 to specify the 'console' kernel command line?

That depends on what type of UART you're using. ttyS is for 8250 ports. ttySAC ended up being used for various SoC based ports which aren't 8250 based.

author
#4 lore raw
Quoted 7 lines · Russell King - ARM Linux
Quoted 2 lines · woody

In the 3.6.6 ARM kernel, should I use ttySAC0 or ttyS0 to specify the 'console' kernel command line?

That depends on what type of UART you're using. ttyS is for 8250 ports. ttySAC ended up being used for various SoC based ports which aren't 8250 based.

Thanks. I think I understood.

The only strange thing is that, however, on my here this is a 2.6.16.4 kernel, that was using ttyS instead of ttySAC for the same physical port on the same board.

Signature · 2 lines
-woody
I can't go back to yesterday - because I was a different person then.