Linker ERROR

I have a bunch of sc520 fixes from a board port I did. This one is cause by a bad linker directive file (u-boot.lds).

I believe I fixed the other sc520's also. I need to check and submit a patch.

My board has a 512k 8-bit flash - you will have to adjust the flash address in the linker file and in the 16 bit .S if your flash is larger.

-brad

/*
* (C) Copyright 2002
* Daniel Engstr?m, Omicron Ceti AB, daniel at omicron.se. *
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/

OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") OUTPUT_ARCH(i386)
ENTRY(_start)

SECTIONS

{	
	. = 0x38fc0000;		/* Where bootcode in the flash is mapped */
	.text  : { *(.text); }

	__u_boot_cmd_start = .;
	.u_boot_cmd : { *(.u_boot_cmd) }
	__u_boot_cmd_end = .;

        . = ALIGN(4);
        .rodata : { *(.rodata) *(.rodata.*) }

        . = 0x400000; 	                    /* Ram data segment to use */
	_i386boot_romdata_dest = ABSOLUTE(.);
        .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
	_i386boot_romdata_start = LOADADDR(.data); 	

        . = ALIGN(4);
        .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) }
	_i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got); 	


        . = ALIGN(4);
	_i386boot_bss_start = ABSOLUTE(.);
        .bss : { *(.bss) }	
	_i386boot_bss_size = SIZEOF(.bss);
	
	
	/* 16bit realmode trampoline code */
	.realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) ) { *(.realmode) }
    
	_i386boot_realmode = LOADADDR(.realmode);
	_i386boot_realmode_size = SIZEOF(.realmode);
	
	/* 16bit BIOS emulation code (just enough to boot Linux) */
	.bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) }
    
	_i386boot_bios = LOADADDR(.bios);
	_i386boot_bios_size = SIZEOF(.bios);
	

	/* The load addresses below assumes that the flash
	 * will be mapped so that 0x38ff0000 == 0xffff0000
	 * at reset time
	 *
	 * The fe00 and ff00 offsets of the start32 and start16 
	 * segments are arbitrary, the just have to be mapped
	 * at reset and the code have to fit.
	 * The fff0 offset of reset is important, however.
	 */
	 
	 
	. = 0xfffffe00;
	.start32 : AT (0x38fffe00) { *(.start32); } 
	
	. = 0xff00;
	.start16 : AT (0x38ffff00) { *(.start16); }  
	
	. = 0xfff0;
	.reset : AT (0x38fffff0) { *(.reset); }  
	_i386boot_end = (LOADADDR(.reset) + SIZEOF(.reset) );
}