nVidea Graphics card not recognised by lspci
Hi all.
The enclosed is the output from lspci -vvv for the video card on one of my systems. Can anybody tell me any more about this card, as "Unknown device 0322" isn't too useful a description.
If any further information is required, please tell me where to find it and I will report it here.
Best wishes from Riley.
*****************************************************************************
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0322 (rev a1) (prog-if 00 [VGA])
Subsystem: Unknown device 1682:203c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Quoted 3 lines · Riley Williams
The enclosed is the output from
lspci -vvvfor the video card on one of my systems. Can anybody tell me any more about this card, as "Unknown device 0322" isn't too useful a description.
http://www.pcidatabase.com/vendor_details.php?id=606
0x0322 Chip Number: NV34.3
Chip Description: GeForce FX 5200
On Mon, 06 Dec 2004 10:44:16 +0000
"Riley Williams" <[email protected]> bubbled:
Quoted 5 lines
Hi all.
The enclosed is the output from
lspci -vvvfor the video card on one of my systems. Can anybody tell me any more about this card, as "Unknown device 0322" isn't too useful a description.
Your lspci database is too old.
Your card should be (taken from pci.ids):
0322 NV34 [GeForce FX 5200]
Quoted 34 lines
If any further information is required, please tell me where to find it and I will report it here.
Best wishes from Riley.
*********************************************************************
********01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0322 (rev a1) (prog-if 00 [VGA])
Subsystem: Unknown device 1682:203c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory atd1000000(32-bit, non-prefetchable) [size=16M] Region 1: Memory ate0000000(32-bit, prefetchable) [size=256M] Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 7 lines
MyExcuse: Domain controller not responding Martin Zwickel <[email protected]> Research & Development TechnoTrend AG <http://www.technotrend.de>
Quoted 5 lines · Martin Zwickel
On Mon, 06 Dec 2004 10:44:16 +0000
"Riley Williams" <[email protected]> bubbled:
Quoted 2 lines
Hi all.
Quoted 9 lines
Quoted 3 lines
The enclosed is the output from
lspci -vvvfor the video card on one of my systems. Can anybody tell me any more about this card, as "Unknown device 0322" isn't too useful a description.Your lspci database is too old.
Your card should be (taken from pci.ids):
0322 NV34 [GeForce FX 5200]
Incase you don't know, just run update-pciids to download/install the latest ids, then try lspci again
Andrew
Quoted 1 line · Andrew Walrond
update-pciids
bash: update-pciids: command not found
System is FC2, kernel 2.6.10-rc3
lspci version 2.1.99-test3
Do I need to grab a newer util package that contains lspci?
Signature · 8 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.30% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attorneys please note, additions to this message by Gene Heskett are: Copyright 2004 by Maurice Eugene Heskett, all rights reserved.
Quoted 9 lines · Gene Heskett
Quoted 1 line · Andrew Walrond
update-pciids
bash: update-pciids: command not found
System is FC2, kernel 2.6.10-rc3
lspci version 2.1.99-test3Do I need to grab a newer util package that contains lspci?
Simply replace /usr/share/hwdata/pci.ids with a newer version from http://pciids.sourceforge.net/.
Phil
On Mon, 6 Dec 2004 10:40:49 -0500
Gene Heskett <[email protected]> bubbled:
Quoted 4 lines · Andrew Walrond
Quoted 2 lines
update-pciids
bash: update-pciids: command not found
as root?
it's in /sbin/update-pciids
Quoted 6 lines
System is FC2, kernel 2.6.10-rc3
lspci version 2.1.99-test3Do I need to grab a newer util package that contains lspci?
# which update-pciids /sbin/update-pciids
# epm -qf `which update-pciids` pciutils-2.1.11-r1
you can get the newest pci.ids file here:
http://pciids.sourceforge.net/pci.ids
Signature · 7 lines
MyExcuse: Of course it doesn't work. We've performed a software upgrade. Martin Zwickel <[email protected]> Research & Development TechnoTrend AG <http://www.technotrend.de>
On Mon, 6 Dec 2004 10:40:49 -0500
Gene Heskett <[email protected]> bubbled:
Quoted 10 lines · Andrew Walrond
Quoted 2 lines
update-pciids
bash: update-pciids: command not found
System is FC2, kernel 2.6.10-rc3
lspci version 2.1.99-test3Do I need to grab a newer util package that contains lspci?
sorry, cut and paste error!
here the correct url:
http://pciids.sourceforge.net/pci.ids.bz2
Signature · 7 lines
MyExcuse: Jan 9 16:41:27 huber su: 'su root' succeeded for .... on /dev/pts/1 Martin Zwickel <[email protected]> Research & Development TechnoTrend AG <http://www.technotrend.de>
Quoted 6 lines · Phil Oester
Quoted 5 lines · Gene Heskett
Quoted 1 line · Andrew Walrond
update-pciids
bash: update-pciids: command not found
Quoted 7 lines
Quoted 4 lines
System is FC2, kernel 2.6.10-rc3
lspci version 2.1.99-test3Do I need to grab a newer util package that contains lspci?
Simply replace
/usr/share/hwdata/pci.idswith a newer version from http://pciids.sourceforge.net/.
Humm, couldn't get the text file to dl with mozilla, the dl window just sat there, but the .gz worked fine. Thanks.
Quoted 6 lines
Phil
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 8 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.30% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attorneys please note, additions to this message by Gene Heskett are: Copyright 2004 by Maurice Eugene Heskett, all rights reserved.
Quoted 10 lines · Martin Zwickel
On Mon, 6 Dec 2004 10:40:49 -0500
Gene Heskett <[email protected]> bubbled:
Quoted 4 lines · Andrew Walrond
Quoted 1 line
update-pciids
bash: update-pciids: command not found
as root?
it's in/sbin/update-pciids
Here it isn't. This is an update of RH8 to FC2.
But I did get a fresh copy with moz from another link just now, thanks.
Signature · 8 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.30% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attorneys please note, additions to this message by Gene Heskett are: Copyright 2004 by Maurice Eugene Heskett, all rights reserved.