Skip to contentSkip to conversation

iwlwifi: Upload rate is ten times faster on Windows

DISCUSSION Benedikt Schwarz 2 participants 3 messages Jan 26, 2014 – Jan 28, 2014

lore
Share & tools
lore
#0 lore raw

Hi,

the upload rate of my Intel Centrino Wireless-N 100 BGN (REV=0x6C) with firmware version 39.31.5.1 build 32895 is about ten times faster on Windows 7 (~ 4500 KB/s) than on Linux (~ 500 KB/s) when uploading files to my NAS device. I'm running Kubuntu 13.10 with kernel 3.12.0-031200-generic.

What could be the reason for this problem?

Regards,
Benedikt Schwarz

=== dmesg ===

iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control iwlwifi 0000:01:00.0: irq 44 for MSI/MSI-X
iwlwifi 0000:01:00.0: loaded firmware version 39.31.5.1 build 32895 op_mode iwldvm
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 100 BGN, REV=0x6C
iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3

#1 lore raw
Quoted 17 lines · Benedikt Schwarz

Hi,

the upload rate of my Intel Centrino Wireless-N 100 BGN (REV=0x6C) with firmware version 39.31.5.1 build 32895 is about ten times faster on Windows 7 (~ 4500 KB/s) than on Linux (~ 500 KB/s) when uploading files to my NAS device. I'm running Kubuntu 13.10 with kernel 3.12.0-031200-generic.

What could be the reason for this problem?

Regards,
Benedikt Schwarz

=== dmesg ===

Quoted 15 lines

iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control iwlwifi 0000:01:00.0: irq 44 for MSI/MSI-X
iwlwifi 0000:01:00.0: loaded firmware version 39.31.5.1 build 32895 op_mode iwldvm
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 100 BGN, REV=0x6C
iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3

Some questions which will greatly help in getting this resolved:

How are you connecting to the NAS? Samba/Cifs? NFS? FTP? How are you measuring your bandwidth?

Check /etc/modprobe.d/* for a line that has something like:

iwlwifi 11n_disable=1

A lot of distributions have that on by default as there have been issues with the iwlwifi driver using 802.11n.

Are you connecting to an open or wpa1+tkip access point? Try using wpa2+ccmp instead. This is required for 802.11n to work. Windows may not be enforcing that portion of the standard.

#2 lore raw

Hi Pat,

Am 27.01.2014 00:56, schrieb Pat Erley:

Quoted 9 lines · Benedikt Schwarz
Quoted 8 lines

Hi,

the upload rate of my Intel Centrino Wireless-N 100 BGN (REV=0x6C) with firmware version 39.31.5.1 build 32895 is about ten times faster on Windows 7 (~ 4500 KB/s) than on Linux (~ 500 KB/s) when uploading files to my NAS device. I'm running Kubuntu 13.10 with kernel 3.12.0-031200-generic.

Quoted 5 lines
Quoted 1 line

What could be the reason for this problem?

Some questions which will greatly help in getting this resolved:

How are you connecting to the NAS? Samba/Cifs? NFS? FTP?

A Samba/CIFS connection.

Quoted 1 line

How are you measuring your bandwidth?

I use bandwidth monitors.

Quoted 3 lines

Check /etc/modprobe.d/* for a line that has something like:

iwlwifi 11n_disable=1

I haven't found a line like this in any of these files in /etc/modprobe.d/

Quoted 6 lines

A lot of distributions have that on by default as there have been issues with the iwlwifi driver using 802.11n.

Are you connecting to an open or wpa1+tkip access point? Try using wpa2+ccmp instead. This is required for 802.11n to work. Windows may not be enforcing that portion of the standard.

I already use WPA2.

Regards,
Benedikt Schwarz