3TB disk hassles
Quoted 31 lines · Neil Conway
Howdy...
After much banging of heads on walls, I am throwing in the towel and asking the experts ;-) ... To cut a long story short:
Is it possible to make a 3TB disk work properly in Linux?
Our "disk" is 12x300GB in RAID5 (with 1 hot-spare) on a 3ware 9500-S12, so it's actually 2.7TiB ish. It's also
/dev/sda- i.e., the one and only disk in the system.Problems are arising due to the 32-bit-ness of normal partition tables.
I can use parted to make a 2.7TB partition (sda4), and/proc/partitionslooks fine until a reboot, whereupon the top bits are lost and the big partition looks like a 700GB partition instead of a 2.7TB one; this is a bad thing ;-)I've had my hopes raised by GPT, but after more reading it appears this doesn't work on vanilla x86 PCs.
Tips gratefully received.
Neil
PS: not on-list; I'll be reading the real-time archivers, but CCs of any replies would be appreciated.
Quoted 7 lines
___________________________________________________________
ALL-NEW Yahoo! Messenger - all new features - even more fun! http://uk.messenger.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Neil,
I just set up a new file server a couple of weeks ago, which holds two RAIDs, making up 4.1 TB each. I'm not aware of any distributions that will do the partitioning for you. I was able to get the system configured by booting Knoppix and using parted for the partitioning. Fedora refused to install on this system after checking the GPT partition table. The latest Mandrake Linux warned me about the partitions, but at least it accepted going on with the install anyway. lilo is used as the bootloader and has no problem existing on the MBR of the RAID. My system is a dual 3.2 GHz Xeon system with 8GB RAM, two 3Ware 9500S RAID controllers, 12 400GB disks pr. RAID controller. Here's a df from the system:
[root@asaphome ~]# df
Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.9G 1.1G 6.8G 14% / /dev/sda3 14G 3.4G 11G 25% /usr /dev/sda4 4.0T 232G 3.8T 6% /home
/dev/sdb1 4.1T 24G 4.0T 1% /archive
Good Luck!
Regards Jan Lindheim