Newbie question: How to get dependencies into compile of custom recipe?
Hi
Sorry for this simple question. I've just started building my first image with yocto and would now like to add a (very simple) own recipe.
I followed the Yocto Development guide, added my own layer and included the "helloworld" example.
Now I would like to exchange the helloworld.c code with a simple gstreamer-rtsp server code
(http://cgit.freedesktop.org/gstreamer/gst-rtsp-server/tree/examples/test-launch.c).
I changed the bb file as follows, adding expecially the DEPENDS:
#
# This file was derived from the 'Hello World!' example recipe in the # Yocto Project Development Manual.
#
DESCRIPTION = "Simple helloworld application"
SECTION = "multimedia"
LICENSE = "MIT"LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" PR = "r0"
SRC_URI = "file://cameraserver.c"
DEPENDS = "gst-rtsp gstreamer"
S = "${WORKDIR}"
do_compile() {
${CC} cameraserver.c -o cameraserver
}do_install() {
install -d ${D}${bindir}
install -m 0755 cameraserver ${D}${bindir}
}The package "gst-rtsp" is correctly built (as libgstrtspserver-0.10-0-0.10.8-r0@cortexa9hf_vfp_neon), but the compilation process of the "cameraserver.c" does not find the necessary header include files.
NOTE: recipe camera-server-0.1-r0: task do_compile: Started Log data follows:
| DEBUG: Executing shell function do_compile | cameraserver.c:20:21: fatal error: gst/gst.h: No such file or directory | #include <gst/gst.h> | ^ | compilation terminated. | WARNING: exit code 1 from a shell command. | ERROR: Function failed: do_compile (log file is located at
/home/ubuntu/yocto/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/camera-server/0.1-r0/temp/log.do_compile.26393)
NOTE: recipe camera-server-0.1-r0: task do_compile: Failed
The debug of bitbake shows, however, that it correctly identifies the dependent packages:
DEBUG: providers for gst-rtsp are: ['gst-rtsp']
DEBUG: sorted runtime providers for gst-rtsp are:
['/home/ubuntu/yocto/sources/meta-openembedded/meta-multimedia/recipes-multimedia/gstreamer/gst-rtsp_0.10.8.bb']
DEBUG: adding '/home/ubuntu/yocto/sources/meta-openembedded/meta-multimedia/recipes-multimedia/gstreamer/gst-rtsp_0.10.8.bb' to satisfy runtime 'gst-rtsp'
DEBUG: providers for gstreamer are: ['gstreamer']
DEBUG: sorted runtime providers for gstreamer are:
['/home/ubuntu/yocto/sources/poky/meta/recipes-multimedia/gstreamer/gstreamer_0.10.36.bb']
DEBUG: adding '/home/ubuntu/yocto/sources/poky/meta/recipes-multimedia/gstreamer/gstreamer_0.10.36.bb'
to satisfy runtime 'gstreamer'
So, what am I doing wrong? Do I explicitly need to add the dependencies to the compile environment somehow? If yes, where are the found directories stored?
Or am I doing this all very wrong? I am really very new to Yocto.
Thanks for any help!
Michael
Quoted 77 lines · Neuer User
Hi
Sorry for this simple question. I've just started building my first image with yocto and would now like to add a (very simple) own recipe.
I followed the Yocto Development guide, added my own layer and included the "helloworld" example.
Now I would like to exchange the
helloworld.ccode with a simple gstreamer-rtsp server code
(http://cgit.freedesktop.org/gstreamer/gst-rtsp-server/tree/examples/test-launch.c).I changed the bb file as follows, adding expecially the DEPENDS:
#
# This file was derived from the 'Hello World!' example recipe in the # Yocto Project Development Manual.
#DESCRIPTION = "Simple helloworld application"
SECTION = "multimedia"
LICENSE = "MIT"LIC_FILES_CHKSUM= "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" PR = "r0"
SRC_URI= "file://cameraserver.c"DEPENDS = "gst-rtsp gstreamer"
S = "${WORKDIR}"
do_compile() { ${CC} cameraserver.c -o cameraserver }do_install() { install -d ${D}${bindir} install -m 0755 cameraserver ${D}${bindir} }The package "gst-rtsp" is correctly built (as libgstrtspserver-0.10-0-0.10.8-r0@cortexa9hf_vfp_neon), but the compilation process of the "
cameraserver.c" does not find the necessary header include files.NOTE: recipe camera-server-0.1-r0: task
do_compile: Started Log data follows:| DEBUG: Executing shell function do_compile | cameraserver.c:20:21: fatal error: gst/gst.h: No such file or directory | #include <gst/gst.h> | ^ | compilation terminated. | WARNING: exit code 1 from a shell command. | ERROR: Function failed: do_compile (log file is located at
/home/ubuntu/yocto/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/camera-server/0.1-r0/temp/log.do_compile.26393)
NOTE: recipe camera-server-0.1-r0: taskdo_compile: FailedThe debug of bitbake shows, however, that it correctly identifies the dependent packages:
DEBUG: providers for gst-rtsp are: ['gst-rtsp']
DEBUG: sorted runtime providers for gst-rtsp are:
['/home/ubuntu/yocto/sources/meta-openembedded/meta-multimedia/recipes-multimedia/gstreamer/gst-rtsp_0.10.8.bb']
DEBUG: adding '/home/ubuntu/yocto/sources/meta-openembedded/meta-multimedia/recipes-multimedia/gstreamer/gst-rtsp_0.10.8.bb' to satisfy runtime 'gst-rtsp'
DEBUG: providers for gstreamer are: ['gstreamer']
DEBUG: sorted runtime providers for gstreamer are:
['/home/ubuntu/yocto/sources/poky/meta/recipes-multimedia/gstreamer/gstreamer_0.10.36.bb']
DEBUG: adding '/home/ubuntu/yocto/sources/poky/meta/recipes-multimedia/gstreamer/gstreamer_0.10.36.bb'
to satisfy runtime 'gstreamer'
Quoted 5 lines
So, what am I doing wrong? Do I explicitly need to add the dependencies to the compile environment somehow? If yes, where are the found directories stored?
Or am I doing this all very wrong? I am really very new to Yocto.
Basically, you need to pass in the correct compiler and linker flags.
http://gstreamer.freedesktop.org/data/doc/gstreamer/head/faq/html/chapter-developing.html
Adding:
pkg-config --cflags --libs gstreamer
to your compiler line will probably help. The system will automatically figure out things from there, the environment contains things that pkg-config can use to generate the correct options.
Cheers,
Richard
Am 22.04.2014 10:42, schrieb Richard Purdie:
Quoted 9 lines
Basically, you need to pass in the correct compiler and linker flags.
http://gstreamer.freedesktop.org/data/doc/gstreamer/head/faq/html/chapter-developing.html
Adding:
pkg-config --cflags --libs gstreamer
Quoted 8 lines
to your compiler line will probably help. The system will automatically figure out things from there, the environment contains things that pkg-config can use to generate the correct options.
Cheers,
Richard
Thanks, that helped, but I'm still not through, I'm afraid.
My recipe look like this now:
DESCRIPTION = "Simple helloworld application"
SECTION = "multimedia"
LICENSE = "MIT"LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" PR = "r0"
SRC_URI = "file://cameraserver.c"
DEPENDS = "gst-rtsp gstreamer"
S = "${WORKDIR}"
do_compile() {
${CC} `pkg-config --cflags --libs gstreamer-0.10`cameraserver.c -o cameraserver
}
do_install() {
install -d ${D}${bindir}
install -m 0755 cameraserver ${D}${bindir}
}It only worked with "gstreamer-0.10". Now the compilation works, but linking stops:
Log data follows:
| DEBUG: Executing shell function do_compile | /tmp/cckmN8NC.o: In function `main': | cameraserver.c:(.text+0x70): undefined reference to `gst_rtsp_server_new' | cameraserver.c:(.text+0x7c): undefined reference to
`gst_rtsp_server_get_media_mapping'
| cameraserver.c:(.text+0x84): undefined reference to `gst_rtsp_media_factory_new'
| cameraserver.c:(.text+0xa0): undefined reference to `gst_rtsp_media_factory_set_launch'
| cameraserver.c:(.text+0xb4): undefined reference to `gst_rtsp_media_mapping_add_factory'
| cameraserver.c:(.text+0xc8): undefined reference to `gst_rtsp_server_attach'
| collect2: error: ld returned 1 exit status
As it seems only linking to gst-rtsp, not to gstreamer, if I see that correctly.
I then tried to add "gst-rtsp" or "gst-rtsp-server" or "gst-rtsp-0.10" or "gst-rtsp-server-0.10" to the pkg-config part, but none of them were found.
I tell you, I feel extremely stupid. The solution is probably so simple, yet I do not find a solution (even with using Google).
Quoted 2 lines · Neuer User
Sorry for this simple question. I've just started building my first image with yocto and would now like to add a (very simple) own recipe.
(I am not familiar with gstreamer, but it looks like a big project and maybe not so simple!)
The yocto build system figures out dependencies and build order, sets the environment, and generates shell scripts to do the actual tasks. The actual "work" is done by these shell scripts, not by the python code.
Your recipe explicitly defines some steps like do_compile(). When you do this, you are saying "Let me control the compilation, I know what I am doing!". Your do_compile() step is going to generate a run.do_compile script, and that has to work just as if you were running the script yourself.
If something doesn't work, try "bitbake {pkg} -c devshell". That will drop you into the environment the compiler is going to see. The shell scripts are in ../temp. Each script is a single step (do_compile etc). All of the substitutions that Richard described will already have been made; and you will see all the environment variables being set and the calls made to the compiler, linker etc. This directory also contains the log files from recent executions.
You can run these manually, e.g. ../temp/run.do_compile. (The files without PIDs are symlinks to the latest script.) You can edit this script and re-run the compile and link step until it works. Once you've figured out what needs to be set or run, modify the recipe to generate that environment or command.
An important thing to understand is that each step lives in its own little world; an environment variable set in the do_compile is not present in do_install unless you put it there. Avoidance of global state allows the build system to run multiple tasks in parallel.
-Rob Calhoun
(still figuring this stuff out myself)
Quoted 31 lines · Neuer User
Am 22.04.2014 10:42, schrieb Richard Purdie:
Quoted 9 lines
Basically, you need to pass in the correct compiler and linker flags.
http://gstreamer.freedesktop.org/data/doc/gstreamer/head/faq/html/chapter-developing.html
Adding:
pkg-config --cflags --libs gstreamerQuoted 8 lines
to your compiler line will probably help. The system will automatically figure out things from there, the environment contains things that pkg-config can use to generate the correct options.
Cheers,
Richard
Thanks, that helped, but I'm still not through, I'm afraid.
My recipe look like this now:
DESCRIPTION = "Simple helloworld application"
SECTION = "multimedia"
LICENSE = "MIT"LIC_FILES_CHKSUM= "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" PR = "r0"
Quoted 3 lines
SRC_URI= "file://cameraserver.c"DEPENDS = "gst-rtsp gstreamer"
Try adding gst-plugins-good to DEPENDS - that's where the rtsp stuff lives.
Quoted 43 lines
S = "${WORKDIR}"
do_compile() { ${CC} `pkg-config --cflags --libs gstreamer-0.10`
cameraserver.c-o cameraserver
}do_install() { install -d ${D}${bindir} install -m 0755 cameraserver ${D}${bindir} }It only worked with "gstreamer-0.10". Now the compilation works, but linking stops:
Log data follows:
| DEBUG: Executing shell function do_compile | /tmp/cckmN8NC.o: In function `main': | cameraserver.c:(.text+0x70): undefined reference to `gst_rtsp_server_new' | cameraserver.c:(.text+0x7c): undefined reference to`gst_rtsp_server_get_media_mapping'
| cameraserver.c:(.text+0x84): undefined reference to `gst_rtsp_media_factory_new'
| cameraserver.c:(.text+0xa0): undefined reference to `gst_rtsp_media_factory_set_launch'
| cameraserver.c:(.text+0xb4): undefined reference to `gst_rtsp_media_mapping_add_factory'
| cameraserver.c:(.text+0xc8): undefined reference to `gst_rtsp_server_attach'
| collect2: error: ld returned 1 exit statusAs it seems only linking to gst-rtsp, not to gstreamer, if I see that correctly.
I then tried to add "gst-rtsp" or "gst-rtsp-server" or "gst-rtsp-0.10" or "gst-rtsp-server-0.10" to the pkg-config part, but none of them were found.
I tell you, I feel extremely stupid. The solution is probably so simple, yet I do not find a solution (even with using Google).
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
H Rob
Thanks for the information.
To clarify: My recipe is a very simple one. It is just one c file with maybe 40 lines or so.
But it uses library functions from another recipe "gst-rtsp", which again uses "gstreamer".
Both, "gstreamer" and "gst-rtsp" are compiled and working nicely, as far as I can tell.
Now I have a simple c program file that needs to be compiled and linked against "gst-rtsp". Hmmm.
I don't have a makefile. I don't use any autotools for this file. The bb recipe is based on the example in the Yocto Development guide for a simple c file.
I have to admit: I am extremely new to Yocto. I am also not a c programmer. If I program, I typically use python or Qt5. :-)
I guess, I try the "devshell" and see what variables are set and what pkg-config output is like.
In the end, it is probably very simple to do, but for a Newbie like me... :-)
Am 22.04.2014 16:32, schrieb Robert Calhoun:
Quoted 44 lines
Quoted 3 lines · Neuer User
Sorry for this simple question. I've just started building my first image with yocto and would now like to add a (very simple) own recipe.
(I am not familiar with gstreamer, but it looks like a big project and maybe not so simple!)
The yocto build system figures out dependencies and build order, sets the environment, and generates shell scripts to do the actual tasks. The actual "work" is done by these shell scripts, not by the python code.
Your recipe explicitly defines some steps like
do_compile(). When you do this, you are saying "Let me control the compilation, I know what I am doing!". Yourdo_compile()step is going to generate a run.do_compile script, and that has to work just as if you were running the script yourself.If something doesn't work, try "bitbake {pkg} -c devshell". That will drop you into the environment the compiler is going to see. The shell scripts are in ../temp. Each script is a single step (
do_compileetc). All of the substitutions that Richard described will already have been made; and you will see all the environment variables being set and the calls made to the compiler, linker etc. This directory also contains the log files from recent executions.You can run these manually, e.g. ../temp/run.do_compile. (The files without PIDs are symlinks to the latest script.) You can edit this script and re-run the compile and link step until it works. Once you've figured out what needs to be set or run, modify the recipe to generate that environment or command.
An important thing to understand is that each step lives in its own little world; an environment variable set in the
do_compileis not present indo_installunless you put it there. Avoidance of global state allows the build system to run multiple tasks in parallel.-Rob Calhoun (still figuring this stuff out myself)
Got it working!
The hint with the "devshell" helped very much. I could try out "pkg-config --list-all|grep rtsp" and found the name pkg-config was expecting.
So, the line must be:
pkg-config --cflags --libs gstreamer-0.10 gst-rtsp-server-0.10
(Thought I had tried this, but maybe had a typo in the name.)
Now it compiled and build the package. Great!!
Hope, the package does work :-)
Thanks again. I learned a lot!
Michael