How to bulid a GDB-STUB for AT91RM9200?
Hi,Members
Merry Christmas!
Now,I'm do some thing at Atmel AT92RM9200 target with u-boot-0.4.8,and I want to add a gdb-stub for target into the kernel or u-boot.0.4.8.My u-boot and target OS information is:
boot 1.0 (Jun 4 2004 - 17:42:12)
U-Boot 0.4.8 (Oct 13 2005 - 16:29:32)
U-Boot code: 21F00000 -> 21F13C20 BSS: -> 21F1F9A0 DRAM Configuration:
Bank #0: 20000000 64 MB
Atmel: AT49BV1614 (16Mbit) Flash: 16 MB In: serial Out: serial Err: serial
start linux now(y/n):
loading kernel to ram...
done
loading ramdisk to ram...
done
start linux...
## Starting application at 0x23000000 ...
Uncompressing Linux.............................................................Linux version 2.4.19-rmk7 (root at localhost.localdomain) (gcc version 2.95.3 20015CPU:
Arm920Tid(wb) revision 0
Machine: ATMEL AT91RM9200
.........................................
BusyBox v1.00-pre10 (2004.06.15-14:16+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands.
~ #
How can i do? Would you like to give me some supports!
Thank you!
yours sincerely
peike
Quoted 2 lines · In message <[email protected]> you wrote:
Merry Christmas!
Ummm... Your watch is fast.
Quoted 1 line
Now,I'm do some thing at Atmel AT92RM9200 target with u-boot-0.4.8,and I want to
And why are you reposting the same message again? Grrrgh....
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Unix is simple, but it takes a genius to understand the simplicity." - Dennis Ritchie