Skip to contentSkip to conversation

patch for dothan doesn't do anything

DISCUSSION skynet 1 participant 1 message Jan 21, 2006

lore
Share & tools
lore

skynet

author
#0 lore raw

I've patched module speedstep-centrino on my pentium M 715 with 2.6.14 kernel, but I got the same: only 600MHz and 1500MHz are available. I've compiled built-in [*]Intel Enhanced Speedstep with relative [*]Use ACPI tables to decode valid frequency / voltage pairs. But it doesn't change anything(without this one the cpufreq doesn't run).The new values seemed to be ignored, to verify this issue I've strongly undervolted the cpu values corrisponding to my CPU in speedstep-centrino.c, and I've obtained no freezing,with all cpu's load. Please post me your .config or any suggestions to solve this problem...