Skip to contentSkip to conversation

em28xx #0: vidioc_s_fmt_vid_cap queue busy

DISCUSSION Dick 2 participants 2 messages Sep 28, 2009 Media (V4L/DVB)

lore
Share & tools
lore

Dick

author
#0 lore raw

Hi all,

I'm trying to use my TerraTec Grabby (em2860 using em28xx module, tip v4l-dvb sources). Everything works using mplayer.

Now I'd like to use the USB videograbber from gstreamer 0.10.24 but I get the following error in dmesg:

em28xx #0: vidioc_s_fmt_vid_cap queue busy

And gstreamer tells me:

# gst-launch -v v4lsrc
Setting pipeline to PAUSED ...
Pipeline is live and does not need PREROLL ...
ERROR: from element /GstPipeline:pipeline0/GstV4lSrc:v4lsrc0: No supported
formats found
Additional debug info:
gstbasesrc.c(2475): gst_base_src_default_negotiate ():
/GstPipeline:pipeline0/GstV4lSrc:v4lsrc0:
This element did not produce valid caps
ERROR: pipeline doesn't want to preroll.
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...

Does someone know what might be wrong?

Thanks in advance,
Dick

#1 lore raw
Quoted 26 lines · Dick

Hi all,

I'm trying to use my TerraTec Grabby (em2860 using em28xx module, tip v4l-dvb sources). Everything works using mplayer.

Now I'd like to use the USB videograbber from gstreamer 0.10.24 but I get the following error in dmesg:

em28xx #0: vidioc_s_fmt_vid_cap queue busy

And gstreamer tells me:

# gst-launch -v v4lsrc
Setting pipeline to PAUSED ...
Pipeline is live and does not need PREROLL ...
ERROR: from element /GstPipeline:pipeline0/GstV4lSrc:v4lsrc0: No supported
formats found
Additional debug info:
gstbasesrc.c(2475): gst_base_src_default_negotiate ():
/GstPipeline:pipeline0/GstV4lSrc:v4lsrc0:
This element did not produce valid caps
ERROR: pipeline doesn't want to preroll.
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...
Quoted 4 lines

Does someone know what might be wrong?

Thanks in advance,
Dick

I'm not very familiar with gstreamer, but you should probably be using "v4l2src" instead of "v4lsrc", and you probably need to be specifying the other parameters such as the video standard, capture width, height, format, etc. The man page for gst-launch has some examples you might want to look at (if you haven't already).

Cheers,

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com