Skip to contentSkip to conversation

AES hardware support in dm-crypt / kernel

dm-crypt Jens 1 participant 1 message Sep 1, 2011

lore
Share & tools
lore

Jens

author
#0 lore raw

Hello,

I own an ARM-based NAS which - supposedly - has AES hardware support:
The WD MyBook Live. This is the hardware it runs:
http://myapm.apm.com/MyAMCC/retrieveDocument/PowerPC/
APM82181/APM82181_PB4090.pdf
The AES modules are also enabled in the current kernel that it runs (CONFIG_CRYPTO_HW=y).

Upon booting, I get several devices listed in /proc/crypto, but performance on a test image (mounted via loop, 1GB) is rather low (7..8 MB/s) and CPU peaks at 100%. Without encryption the machine can sustain 40..50 MB/s over GBit ethernet and 80..100 MB/s locally (from /dev/zero).

Am I right that if the crypto hardware were active, the CPU load during usage of an encrypted device should not be influenced by the encryption / decryption process
(because this does not happen on the CPU)?
How can I find out for sure whether dm-crypt uses the hardware acceeleration features?

Thanks!

Jens