update documentation with information on the libdirs parameter

PATCH New Florian Feldhaus 1 participant 1 message Feb 6, 2013

Share & tools

Florian Feldhaus

author

2013-02-06 16:28 UTC #0 lore raw

PATCH 1/1 update documentation with information on the libdirs parameter

As promised in the thread "Dracut fails to install libraries on Debian / Ubuntu systems", here is a patch to update the documentation with information on the libdirs parameter.

[PATCH]

dracut.8.asc +4 -1

index da7f327..d4e67bf 100644
@@ -215,10 +215,13 @@ example:
     specify additional directories, where to look for firmwares. This parameter
     can be specified multiple times.
 
+**--libdirs** _<dir>[:<dir>...]++_::
+    specify additional directories, where to look for libraries. This
+    parameter can be specified multiple times.
+
 **--kernel-cmdline <parameters>**::
     specify default kernel command line parameters
 
-
 **--kernel-only**::
     only install kernel drivers and firmware files

dracut.conf.5.asc +3 -0

index e545451..53df706 100644
@@ -58,6 +58,9 @@ line are not interpreted.
 *fw_dir+=*" :__<dir>__[:__<dir>__ ...] "::
     Specify additional directories, where to look for firmwares, separated by :
 
+*libdirs+=*" :__<dir>__[:__<dir>__ ...] "::
+    Specify additional directories, where to look for libraries, separated by :
+
 *install_items+=*" __<file>__[ __<file>__ ...] "::
     Specify additional files to include in the initramfs, separated by spaces.

dracut.sh +2 -0

index cfd10a1..9d04dc6 100755
@@ -87,6 +87,8 @@ Creates initial ramdisk images for preloading modules
                         modules
   --fwdir [DIR]         Specify additional directories, where to look for
                         firmwares, separated by :
+  --libdirs [DIR]       Specify additional directories, where to look for
+                        libraries, separated by :
   --kernel-only         Only install kernel drivers and firmware files
   --no-kernel           Do not install kernel drivers and firmware files
   --kernel-cmdline [PARAMETERS] Specify default kernel command line parameters

[END]