Skip to contentSkip to conversation

Building an atom-pc image

DISCUSSION Jack 2 participants 3 messages Sep 4, 2013 – Sep 5, 2013

lore
Share & tools
lore

Jack

author
#0 lore raw

Hi,

I looked at this page https://www.yoctoproject.org/download/intel%C2%AE-
atom%E2%84%A2-based-pcs-and-devices-atom-pc . I downloaded atom-pc-dylan- 9.0.0.tar.bz2 and ran bitbake core-image-minimal. When building process finished, I didn't give core-image-minimal-atom-pc with .hddimg. While some other extension files like .ext3 and .cpio were built. How can I build an image minimal with .hddimg extension?

Thanks.

#1 lore raw
Quoted 10 lines

-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Jack
Sent: Wednesday, September 04, 2013 5:23 AM
To: [email protected]
Subject: [yocto] Building an atom-pc image

Quoted 7 lines

Hi,

I looked at this page https://www.yoctoproject.org/download/intel%C2%AE-
atom%E2%84%A2-based-pcs-and-devices-atom-pc . I downloaded atom-pc- dylan-
9.0.0.tar.bz2 and ran bitbake core-image-minimal. When building process finished, I didn't give core-image-minimal-atom-pc with .hddimg. While

some

Quoted 1 line

other extension files like .ext3 and .cpio were built. How can I build an

image

Quoted 8 lines

minimal with .hddimg extension?

Thanks.

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Did you make any changes to the local.conf file to point to the Atom-pc as the target?

Regards,

Sean Liming
Owner
Annabooks
Tel: 714-970-7523 / Cell: 858-774-3176

author
#2 lore raw

Thanks Sean. I uncommented MACHINE ?= "atom-pc" in local.conf file and the bitbake created .hddimg extension.