Skip to contentSkip to conversation

ADC continous mode

DISCUSSION shravan 2 participants 2 messages Jan 22, 2014

lore
Share & tools
lore

shravan

author
#0 lore raw

Hi experts,
i am new to this area,
I am using amstrong 3.8.13 kernel in BBB
at first i loaded the device tree as below,

echo cape-bone-iio > /sys/devices/bone_capemgr.*/slots

then i used analog pins however i am getting the fixed values that is values are not varying continously as i vary input analog voltage

if i go to this path /sys/devices/ocp.2/44e0d000.tscadc/tiadc/iio:device0

and then ls -al gives me

total 0

drwxr-xr-x 3 root root    0 Jan  1 03:24 .
drwxr-xr-x 4 root root    0 Jan  1 03:24 ..
-r--r--r-- 1 root root 4096 Jan  1 03:27 dev
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage0_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage1_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage2_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage3_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage4_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage5_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage6_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage7_raw
-r--r--r-- 1 root root 4096 Jan  1 03:25 name
drwxr-xr-x 2 root root    0 Jan  1 03:27 power
lrwxrwxrwx 1 root root    0 Jan  1 03:27 subsystem -> ../../../../../bus/iio
-rw-r--r-- 1 root root 4096 Jan  1 03:24 uevent

there is no mode directory and buffer directory in list . please help to configure ADC In continous mode.

Thanks
shravankumar

#1 lore raw
Quoted 3 lines · shravan

Hi experts,
i am new to this area,
I am using amstrong 3.8.13 kernel in BBB

As the BBB 3.8.x kernel contains gazillions of patches you better ask the creators of the BSP.

Quoted 40 lines

at first i loaded the device tree as below,

echo cape-bone-iio > /sys/devices/bone_capemgr.*/slots

then i used analog pins however i am getting the fixed values that is values are not varying continously as i vary input analog voltage

if i go to this path /sys/devices/ocp.2/44e0d000.tscadc/tiadc/iio:device0

and then ls -al gives me

total 0

drwxr-xr-x 3 root root    0 Jan  1 03:24 .
drwxr-xr-x 4 root root    0 Jan  1 03:24 ..
(quoted diff) +0 -10
-r--r--r-- 1 root root 4096 Jan  1 03:27 dev
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage0_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage1_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage2_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage3_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage4_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage5_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage6_raw
-rw-r--r-- 1 root root 4096 Jan  1 03:27 in_voltage7_raw
-r--r--r-- 1 root root 4096 Jan  1 03:25 name
drwxr-xr-x 2 root root    0 Jan  1 03:27 power
lrwxrwxrwx 1 root root    0 Jan  1 03:27 subsystem -> ../../../../../bus/iio
-rw-r--r-- 1 root root 4096 Jan  1 03:24 uevent

there is no mode directory and buffer directory in list . please help to configure ADC In continous mode.

Thanks
shravankumar

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
Thanks,
//richard