which kernel for lvm + devfs
Hello,
which kernel is suitable for lvm + devfs ?
Currently I use 2.2.11 w/ devfs w/o lvm, I used to have a 2.2.9 w/ lvm but had problems with the aha7xxx (spurious t/o and resets). Patching 2.2.11 for devfs was an adventure, I do not really want to repeat that for 2.2.12. The lvm patch had - of course - several problems with the changed kernel.
What kernel versions and patches do you use ? Nobody out there using devfs and lvm and Adaptec ? I would very appreciate some hints.
Thanks,
Rolf
Signature · 2 lines
Rolf Jakob at home ([email protected]) WWW : http://www.franken.de/users/duffy1/rjakob (KDE-Utils and CCS)
Quoted 9 lines · Rolf Jakob
which kernel is suitable for lvm + devfs ?
Currently I use 2.2.11 w/ devfs w/o lvm, I used to have a 2.2.9 w/ lvm but had problems with the aha7xxx (spurious t/o and resets). Patching 2.2.11 for devfs was an adventure, I do not really want to repeat that for 2.2.12. The lvm patch had - of course - several problems with the changed kernel.What kernel versions and patches do you use ? Nobody out there using devfs and lvm and Adaptec ? I would very appreciate some hints.
I'm using adaptec 2940uw and aha152x with LVM and devfs, with no problems. kernel version 2.2.12, devfs 0.99.5 and LVM 0.7. you have to apply LVM at first, then devfs patch, the problems are lessened. there is only one rejected file, which is quite okay I assume (when you patch it by hand)
Signature · 6 lines
freddy ----==-- _ Adrien "freddy" Farkas ---==---(_)__ __ ____ __ [email protected] --==---/ / _ \/ // /\ \/ / We all know Linux is great... It -=====/_/_//_/\___/ /_/\_\ does infinite loops in 5 seconds
Quoted 1 line
I'm using adaptec 2940uw and aha152x with LVM and devfs, with no problems. kernel version 2.2.12, devfs 0.99.5 and LVM 0.7. you have to apply LVM at first, then devfs patch, the problems are lessened. there is only one rejected file, which is quite okay I assume (when you patch it by hand)
You're right, it was very easy then, thanks.
Now there is only one problem remaining :
After executing linuxrc the kernel cannot find my root lv. The activation worked, but it says it cannot mount /dev/rootvg/rootlv or 0:0.
My lilo.conf reads:
image=/boot/zImage.2212
append="root=/dev/rootvg/rootlv"
root=/dev/rootvg/rootlv
initrd=/boot/lvmboot.gz
label=2212
/boot is a partition based file system on its own, rootlv is accessible while booting with my old root partition.
What am I missing ?
Rolf
Signature · 2 lines
Rolf Jakob at home ([email protected]) WWW : http://www.franken.de/users/duffy1/rjakob (KDE-Utils and CCS)