2.5.38: oops with kernel LLC support enabled
Firstly, a big thanks to Ingo for kksymoops... 2.5.38 panics right out of the chute with no way to save the oops output, so it's REALLY nice to have it decoded on the screen!! Manual transcription of the oops output follows below.
What was I trying to do with LLC support? I have an old JetDirect interface in a LJ-III that speaks DLC/LLC only, and wanted to try to use it with Linux. (It should go without saying that NT and Win2K can talk to it just fine :-)). Both machines in a sample set of two panic the same way... One is a desktop with the NIC driver built-in. The other (that produced the oops output below) is a Dell Latitude CPxJ with a modular Xircom Tulip cardbus driver.
I guess I should mention that I haven't tried this with a 2.4 kernel.
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
c0245da5
*pde = 00000000
Oops: 0000
kernel
CPU: 0
EIP: 0060:[<c0245da5>] Not tainted
EFLAGS: 00010202
EIP is at llc_sap_find [kernel] 0x25
eax: c7fae000 ebx: c02e8e28 ecx: 000000aa edx: 00000000
esi: 00000000 edi: 00000000 ebp: 00000000 esp: c7faffa8
ds: 0068 es: 0068 ss: 0068
Process swapper (pid: 1, threadinfo=c7fae000 task=c7fac040)
Stack: c02e8e28 000000aa 00000000 c0242141 000000aa c02e8e28 00000000 c02df8e1
c01f0ca0 00000000 000000aa c02d0712 c7fae000 c0105093 c0105060 00000000
00000000 00000000 c01054e5 00000000 00000000 00000000
Call Trace: [<c0242141>] llc_sap_open [kernel] 0x11
[<c01f0ca0>] snap_indicate [kernel] 0x0
[<c0105093>] init [kernel] 0x33
[<c0105060>] init [kernel] 0x0
[<c01054e5>] kernel_thread_helper [kernel] 0x5
Code: 8b 02 0f 18 00 81 fa 04 69 33 c0 74 08 38 4a f8 8d 72 a0 75
<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncingSignature · 4 lines
----------------------------------------------------------------------- Bob Tracy WTO + WIPO = DMCA? http://www.anti-dmca.org [email protected] -----------------------------------------------------------------------
Em Wed, Sep 25, 2002 at 10:49:20AM -0500, Bob_Tracy escreveu:
Quoted 4 lines
Firstly, a big thanks to Ingo for kksymoops... 2.5.38 panics right out of the chute with no way to save the oops output, so it's REALLY nice to have it decoded on the screen!! Manual transcription of the oops output follows below.
yes, its a great help
Quoted 1 line
What was I trying to do with LLC support? I have an old JetDirect
Hey, no need to excuses, its there, test and use it, using old protocols is not something to be ashamed, neither hacking it... 8)
Quoted 8 lines
interface in a LJ-III that speaks DLC/LLC only, and wanted to try to use it with Linux. (It should go without saying that NT and Win2K can talk to it just fine :-)). Both machines in a sample set of two panic the same way... One is a desktop with the NIC driver built-in. The other (that produced the oops output below) is a Dell Latitude CPxJ with a modular Xircom Tulip cardbus driver.
I guess I should mention that I haven't tried this with a 2.4 kernel.
you can try, but the codebase there (and I assume you're talking about the LLC stack in the 2.4-ac tree, as the one in the 2.4 stock is incomplete) is old and I'm only now getting to a point where LLC in 2.5 is getting pretty stable (now as in today, 4am :) )
Quoted 14 lines
Unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c0245da5 *pde = 00000000 Oops: 0000 kernel CPU: 0 EIP: 0060:[<c0245da5>] Not tainted EFLAGS: 00010202 EIP is at llc_sap_find [kernel] 0x25 eax: c7fae000 ebx: c02e8e28 ecx: 000000aa edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 esp: c7faffa8 ds: 0068 es: 0068 ss: 0068 Process swapper (pid: 1, threadinfo=c7fae000 task=c7fac040)
Quoted 8 lines
Stack: c02e8e28 000000aa 00000000 c0242141 000000aa c02e8e28 00000000 c02df8e1
c01f0ca0 00000000 000000aa c02d0712 c7fae000 c0105093 c0105060 00000000
00000000 00000000 c01054e5 00000000 00000000 00000000
Call Trace: [<c0242141>] llc_sap_open [kernel] 0x11
[<c01f0ca0>] snap_indicate [kernel] 0x0
[<c0105093>] init [kernel] 0x33
[<c0105060>] init [kernel] 0x0
[<c01054e5>] kernel_thread_helper [kernel] 0x5Could you try with the next version Linus releases? I some fixes already commited into Linus bk tree, some still in DaveM's tree and some waiting for DaveM to pull that, I think, will solve your problem, and wow, don't give up, at least I'd have one more person testing my work 8)
Just let me know if you'd like to get a diff from the latest Linus released kernel to the latest stuff I have, I'll be glad to provide and to receive test results.
Best Regards,
- Arnaldo