Skip to contentSkip to conversation

Regression: kernel 5.4 does not show NVME SSD

DISCUSSION Ingo Brunberg 3 participants 4 messages Dec 2, 2019 – Dec 6, 2019 NVMe

lore
Share & tools
lore
#0 lore raw

Hi experts,

starting with linux kernel 5.4 my NVME SSD from HP is no longer detected correctly, nvme list shows no result. I made no relevant changes regarding .config between kernels 5.3 and 5.4.

Please have a look at this bugzilla entry:
https://bugzilla.kernel.org/show_bug.cgi?id=205679

Maybe all SSDs with a Silicon Motion 2263 controller are affected. If you need more information, please ask.

Regards
Ingo Brunberg

_______________________________________________
linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

maintainer
#1 lore raw
Quoted 11 lines · Ingo Brunberg

Hi experts,

starting with linux kernel 5.4 my NVME SSD from HP is no longer detected correctly, nvme list shows no result. I made no relevant changes regarding .config between kernels 5.3 and 5.4.

Please have a look at this bugzilla entry:
https://bugzilla.kernel.org/show_bug.cgi?id=205679

Maybe all SSDs with a Silicon Motion 2263 controller are affected. If you need more information, please ask.

It's a regression from commit 538af88ea7d9de241e6b6f006e9049c4d96723bb. This one should have only returned the error if < 0, otherwise we can proceed. Will get post a patch shortly with a 5.4 stable request.

_______________________________________________
linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

maintainer
#2 lore raw
Quoted 10 lines
Quoted 10 lines

Hi experts,

starting with linux kernel 5.4 my NVME SSD from HP is no longer detected correctly, nvme list shows no result. I made no relevant changes regarding .config between kernels 5.3 and 5.4.

Please have a look at this bugzilla entry:
https://bugzilla.kernel.org/show_bug.cgi?id=205679

Quoted 6 lines
Quoted 2 lines

Maybe all SSDs with a Silicon Motion 2263 controller are affected. If you need more information, please ask.

It's a regression from commit 538af88ea7d9de241e6b6f006e9049c4d96723bb. This one should have only returned the error if < 0, otherwise we can proceed. Will get post a patch shortly with a 5.4 stable request.

Should we have something that is more granular rather than any positive error?

_______________________________________________
linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

maintainer
#3 lore raw
Quoted 5 lines · Sagi Grimberg
Quoted 2 lines

This one should have only returned the error if < 0, otherwise we can proceed. Will get post a patch shortly with a 5.4 stable request.

Should we have something that is more granular rather than any positive error?

I don't think so, otherwise we'll be chasing new errors from disfunctional controllers. As long as we get a response of any kind, we can use the controller. It's only when we don't get a response, which is what the negative return codes are for.

_______________________________________________
linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme