TDA1997x: report -ENOLINK after disconnecting HDMI source
Subsystems (2)
PATCH 1/1 TDA1997x: report -ENOLINK after disconnecting HDMI source
The TD1997x chip retains vper, hper and hsper register values when the HDMI source is disconnected. Use a different means of checking if the link is still valid.
Signed-off-by Krzysztof Hałasa <[email protected]>
drivers/media/i2c/tda1997x.c +2 -1
@@ -1107,7 +1107,8 @@ tda1997x_detect_std(struct tda1997x_state *state, hper =io_read16 (sd,REG_H_PER ) &MASK_HPER ; hsper =io_read16 (sd,REG_HS_WIDTH ) &MASK_HSWIDTH ;v4l2_dbg (1 , debug, sd,"Signal Timings: %u/%u/%u\n" , vper, hper, hsper); -if (!vper || !hper || !hsper) + +if (!state->input_detect[0 ] && !state->input_detect[1 ])return -ENOLINK ;for (i =0 ; v4l2_dv_timings_presets[i].bt.width; i++) {
Quoted 12 lines · Krzysztof Hałasa
The TD1997x chip retains vper, hper and hsper register values when the HDMI source is disconnected. Use a different means of checking if the link is still valid.
Signed-off-by Krzysztof Hałasa <[email protected]>drivers/media/i2c/tda1997x.c +0
-0
drivers/media/i2c/tda1997x.c tda1997x_detect_std(struct tda1997x_state *state, · line 1114
Quoted 9 lines
drivers/media/i2c/tda1997x.c +2
-1@@ -1107,7 +1107,8 @@ tda1997x_detect_std(struct tda1997x_state *state, hper =io_read16 (sd,REG_H_PER ) &MASK_HPER ; hsper =io_read16 (sd,REG_HS_WIDTH ) &MASK_HSWIDTH ;v4l2_dbg (1 , debug, sd,"Signal Timings: %u/%u/%u\n" , vper, hper, hsper); -if (!vper || !hper || !hsper) + +if (!state->input_detect[0 ] && !state->input_detect[1 ])return -ENOLINK ;for (i =0 ; v4l2_dv_timings_presets[i].bt.width; i++) {
Acked-by Tim Harvey <[email protected]>
Best regards,
Tim