cinergyT2 rework final review
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines
This driver has been working in
my own use quite well, especially after upgrading the bios to the latest available version from TerraTec.Regards,
Tomi Orava
what "bios" do you mean? the firmware?
Quoted 4 lines
Could you check what is the firmware version in your device ? Check for the "bcdDevice" keyword with lsusb -v -s <busid>:<devnum> I had way too many problems with 1.06 firmware version, but the newer 1.08 seems to be a little bit better in stability.
I was not aware that this device uses a firmware. Do I have to flash it into the box? Is this possible with Linux? Where do I find the firmware?
Greets,
Martin Dauskardt
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Le Monday 22 September 2008 21:18:38 Martin Dauskardt, vous avez écrit :
Quoted 9 lines
Quoted 6 lines
This driver has been working in
my own use quite well, especially after upgrading the bios to the latest available version from TerraTec.Regards,
Tomi Oravawhat "bios" do you mean? the firmware?
Quoted 7 lines
Quoted 4 lines
Could you check what is the firmware version in your device ? Check for the "bcdDevice" keyword with lsusb -v -s <busid>:<devnum> I had way too many problems with 1.06 firmware version, but the newer 1.08 seems to be a little bit better in stability.
I was not aware that this device uses a firmware. Do I have to flash it into the box? Is this possible with Linux? Where do I find the firmware?
See this message:
http://linuxtv.org/pipermail/linux-dvb/2008-September/028939.html
Signature · 7 lines
Christophe Thommeret _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi,
Quoted 7 lines · Martin Dauskardt
Quoted 6 lines
This driver has been working in
my own use quite well, especially after upgrading the bios to the latest available version from TerraTec.Regards,
Tomi Oravawhat "bios" do you mean? the firmware?
Yes, I meant the usb device firmware.
Quoted 7 lines
Quoted 5 lines
Could you check what is the firmware version in your device ? Check for the "bcdDevice" keyword with lsusb -v -s <busid>:<devnum> I had way too many problems with 1.06 firmware version, but the newer 1.08 seems to be a little bit better in stability.
I was not aware that this device uses a firmware. Do I have to flash it into the box? Is this possible with Linux? Where do I find the firmware?
You can get the latest firmware from Terratec ftp-site:
ftp://ftp.terratec.net/Receiver/CinergyT2/Update/History/CinergyT2_Firmware_Update_1.08.exe
The very same directory also contains the original proprietary (NOT BDA) windows drivers which are needed before you can use the included flash loader. Unfortutenaly, I don't know any way to do the update in Linux.
Regards,
Tomi Orava
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb