Compiling mantis driver on 2.6.28
A message that is not in the archive (sent off-list or not yet received): [email protected]
I tried downloading and compiling from s2-liplianin repository. Unfortunately the driver doesn't work at all with AzureWave AD-CP300, frontend tda10021 is identified instead of tda10023.
On Sun, 19 Oct 2008 11:19:40 +0200 (MEST) Niklas Edmundsson posted a patch that makes the mantis driver correctly identify the frontend tda10023. It is in linux-dvb Digest, Vol 45, Issue 24. I tried that patch on the just.de repository and it kind of "improved" things, but since CI support was lacking it was unusable for me.
I would really appreciate CI support since all my ComHem channels are scrambled.
Mårten
-----Ursprungligt meddelande-----
Date: Wed, 07 Jan 2009 13:28:20 +0100
From: "Hans Werner" <[email protected]>
Subject: Re: [linux-dvb] Compiling mantis driver on 2.6.28
To: Christian Lammers <[email protected]>,
[email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset="iso-8859-1"
Quoted 8 lines
Hi,
i'm new to this mailinglist, so 'Hello' to all :)
My first problem, cause of bleeding edge hardware, intels gem, hdmi, experimental xorg and so on, i've problems to compile the mantis driver from http://jusst.de/hg/mantis on 2.6.28.
Quoted 5 lines
I'm getting the following:
.... ....
Is there a patch or something else to get this driver working on 2.6.28
Use the s2-liplianin repository. It contains an up-to-date mantis driver.
hg clone http://mercurial.intuxication.org/hg/s2-liplianin
cd s2-liplianin
make
sudo make install
sudo reboot
Hans
Signature · 5 lines
_______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead [email protected] [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 39 lines
Quoted 18 lines
Quoted 10 lines
Hi,
i'm new to this mailinglist, so 'Hello' to all :)
My first problem, cause of bleeding edge hardware, intels gem, hdmi, experimental xorg and so on, i've problems to compile the mantis driver from http://jusst.de/hg/mantis on 2.6.28.
Quoted 5 lines
I'm getting the following:
.... ....
Is there a patch or something else to get this driver working on 2.6.28
Use the s2-liplianin repository. It contains an up-to-date mantis driver.
Quoted 7 lines
hg clone http://mercurial.intuxication.org/hg/s2-liplianin
cd s2-liplianin
make
sudo make install
sudo rebootHans
Mårten Gustafsson wrote:
I tried downloading and compiling from s2-liplianin repository. Unfortunately the driver doesn't work at all with AzureWave AD-CP300, frontend tda10021 is identified instead of tda10023.
On Sun, 19 Oct 2008 11:19:40 +0200 (MEST) Niklas Edmundsson posted a patch that makes the mantis driver correctly identify the frontend tda10023. It is
in linux-dvb Digest, Vol 45, Issue 24. I tried that patch on the just.de repository and it kind of "improved" things, but since CI support was lacking it was unusable for me.
Quoted 4 lines
I would really appreciate CI support since all my ComHem channels are scrambled.
Mårten
Could you post the output of 'lspci -vvn' please?
Hans
Signature · 9 lines
Release early, release often. Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead [email protected] [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 59 lines
-----Ursprungligt meddelande-----
Från: Hans Werner [mailto:[email protected]]
Skickat: den 9 januari 2009 12:11
Till: "Mårten Gustafsson"; [email protected] Ämne: Re: [linux-dvb] Compiling mantis driver on 2.6.28Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Hi,
i'm new to this mailinglist, so 'Hello' to all :)
My first problem, cause of bleeding edge hardware, intels gem, hdmi, experimental xorg and so on, i've problems to compile the mantis driver from http://jusst.de/hg/mantis on 2.6.28.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
I'm getting the following:
.... ....
Is there a patch or something else to get this driver
working on
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
2.6.28
Use the s2-liplianin repository. It contains an
up-to-date mantis driver.
Quoted 7 lines
Quoted 7 lines
hg clone http://mercurial.intuxication.org/hg/s2-liplianin
cd s2-liplianin
make
sudo make install
sudo rebootQuoted 6 lines
Quoted 1 line
Hans
Mårten Gustafsson wrote:
I tried downloading and compiling from s2-liplianin repository. Unfortunately the driver doesn't work at all with AzureWave
AD-CP300,
Quoted 3 lines
frontend tda10021 is identified instead of tda10023.
On Sun, 19 Oct 2008 11:19:40 +0200 (MEST) Niklas Edmundsson
posted a
Quoted 3 lines
patch that makes the mantis driver correctly identify the frontend tda10023. It is in linux-dvb Digest, Vol 45, Issue 24. I tried that patch on the just.de repository and it kind of "improved"
things, but
Quoted 3 lines
since CI support was lacking it was unusable for me.
I would really appreciate CI support since all my ComHem
channels are
Quoted 3 lines
scrambled.
Mårten
Quoted 9 lines
Could you post the output of 'lspci -vvn' please? Hans
--
Release early, release often.Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
Hi Hans
I guess this is what you want:
05:07.0 0480: 1822:4e35 (rev 01)
Subsystem: 1822:0008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c6000000 (32-bit, prefetchable) [size=4K] Kernel driver in use: Mantis
Kernel modules: mantis
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 3 lines · Mårten Gustafsson
I tried downloading and compiling from s2-liplianin repository. Unfortunately the driver doesn't work at all with AzureWave AD-CP300, frontend tda10021 is identified instead of tda10023.
The official mantis repository is at http://jusst.de/hg/mantis. It contains the latest mantis related changes.
Please do test and report.
Regards,
Manu
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
What about S2API in this tree ?
Quoted 11 lines
Quoted 3 lines · Mårten Gustafsson
I tried downloading and compiling from s2-liplianin repository. Unfortunately the driver doesn't work at all with AzureWave AD-CP300, frontend tda10021 is identified instead of tda10023.
The official mantis repository is at http://jusst.de/hg/mantis. It contains the latest mantis related changes.
Please do test and report.
Quoted 11 lines
Regards,
Manu_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 2 lines · gimli
What about S2API in this tree ?
The mantis driver isn't complete yet, but quite usable for some of the basic use cases. If there are many interested to go with a v4l-dvb synced version, the tree can be synced as well.
Regards,
Manu
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 7 lines
Quoted 2 lines · gimli
What about S2API in this tree ?
The mantis driver isn't complete yet, but quite usable for some of the basic use cases. If there are many interested to go with a v4l-dvb synced version, the tree can be synced as well.
Yes please: synched including S2API.
Quoted 3 lines
Regards,
Manu
Signature · 9 lines
Release early, release often. Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead [email protected] [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 4 lines
Quoted 2 lines · gimli
What about S2API in this tree ?
Quoted 9 lines
The mantis driver isn't complete yet, but quite usable for some of the basic use cases. If there are many interested to go with a v4l-dvb synced version, the tree can be synced as well.
Regards,
Manu
Please make a sync.
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Op vrijdag 09-01-2009 om 16:24 uur [tijdzone +0400], schreef Manu Abraham:
Quoted 7 lines
Quoted 2 lines · gimli
What about S2API in this tree ?
The mantis driver isn't complete yet, but quite usable for some of the basic use cases. If there are many interested to go with a v4l-dvb synced version, the tree can be synced as well.
Please do sync. I would finally be able to start using a card i bought years ago. And with the increased usage and visibility additinal features to complete might come quicker.
Rudy
Quoted 9 lines
Regards,
Manu_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 7 lines
The official mantis repository is at http://jusst.de/hg/mantis. It contains the latest mantis related changes.
Please do test and report.
Regards,
Manu
Hi Manu,
I have Technistat CableStar HD 2
http://www.technisat.com/index7b97.html?nav=PC_products,en,76-211 which is VP-2040
I have tested two mantis versions.
Sep 21 mantis-303b1d29d735
- It reports unsupported CAM (Technisat TechniCrypt CX Conax module) dvb_ca adapter 1: Invalid PC card inserted :(
but at least few FTA channels work perfectly.
Recent mantis-147f405ecd77
- Almost the same behaviour only after inserting the mantis module dmesg reports one new line more at the end:mantis_uart_read (0): RX Fifo FULL
but the FTA channels still work.
I saw in the archive of the linux-dvb list that the mantis CI support is not finalized yet. Is there any plan/chance to get it working?
Regards,
Tomas
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 5 lines
Quoted 3 lines · Mårten Gustafsson
I tried downloading and compiling from s2-liplianin repository. Unfortunately the driver doesn't work at all with AzureWave AD-CP300, frontend tda10021 is identified instead of tda10023.
Quoted 8 lines
The official mantis repository is at http://jusst.de/hg/mantis. It contains the latest mantis related changes.
Please do test and report.
Regards,
Manu
The repository at http://jusst.de/hg/mantis does not compile with 2.6.28.
Try s2-liplianin again : it has been patched to fix the tda10021/tda10023 issue.
Hans
Signature · 10 lines
Release early, release often. Sensationsangebot verlängert: GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K1308T4569a _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead [email protected] [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 10 lines
Från: Manu Abraham [mailto:[email protected]]
Skickat: den 9 januari 2009 13:05
Till: Mårten Gustafsson
Kopia: [email protected]
Ämne: Re: [linux-dvb] Compiling mantis driver on 2.6.28Quoted 2 lines · Mårten Gustafsson
I tried downloading and compiling from s2-liplianin repository. Unfortunately the driver doesn't work at all with AzureWave
Quoted 8 lines
AD-CP300,
Quoted 1 line
frontend tda10021 is identified instead of tda10023.
The official mantis repository is at
http://jusst.de/hg/mantis. It contains the latest mantis related changes.Please do test and report.
I downloaded latest from jusst.de and compiled. Oberve that I have an older kernel:
$ uname -a Linux ubuntu-htpc 2.6.27-9-generic #1 SMP Thu Nov 20 22:15:32 UTC 2008 x86_64 GNU/Linux more10@ubuntu-htpc:
Correct frontend is reported. Scanning in Kaffeine quits after scanning a few channels. w_scan with standard switches scans a large number of channels, but i get tieout in filter scan resulting in the channels name not being reported. w_scan with -F switch works better, but about a quarter of the channels now have no name.
Tuning to a radio channel in Kaffein results in 5 seconds of distortion, then the machine hangs, leaving my ext2 file system corrupt :-).
And of course Kaffeine reports that all my tv channels are scramled and quitting.
Quoted 6 lines
Regards,
Manu
Mårten
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb