Kernelnewbies Digest, Vol 71, Issue 26
The BBC Micro which was 6502 based had an add on that let you connect a Z80 straight onto the same bus.
Different regards "operating system" I know, but it has been tried before.
Quoted 185 lines · On Fri, 21 Oct 2016, 17:00 , <[email protected]> wrote:
Send Kernelnewbies mailing list submissions to
kernelnewbies at kernelnewbies.orgTo subscribe or unsubscribe via the World Wide Web, visit
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
or, via email, send a message with subject or body 'help' to
kernelnewbies-request at kernelnewbies.orgYou can reach the person managing the list at
kernelnewbies-owner at kernelnewbies.orgWhen replying, please edit your Subject line so it is more specific than "Re: Contents of Kernelnewbies digest..."
Today's Topics:
1. Is that possible to implement a single machine with
heterogeneous architecture. (Douglas Su)
2. Re: Is that possible to implement a single machine with
heterogeneous architecture. (Felix Bytow)
3. Re: Is that possible to implement a single machine with
heterogeneous architecture. (Valdis.Kletnieks at vt.edu)----------------------------------------------------------------------
Message: 1
Date: Fri, 21 Oct 2016 03:10:28 +0000
From: Douglas Su <[email protected]>
Subject: Is that possible to implement a single machine with
heterogeneous architecture.
To: kernelnewbies <[email protected]> Message-ID:<SN1PR04MB2096827D49CA8F766DA1392EECD40 at SN1PR04MB2096.namprd04.prod.outlook.com
Quoted 1 line
Content-Type: text/plain; charset="iso-8859-1"
Hello everyone,
Is that possible to install multiple CPUs which have different architecture on a single machine? For example, on a single machine with two different cpu sockets for X86 and MIPS cpu respectively, and these two cpus are inter-connected with some sorts of bus (PCI or other advanced buses).
If it is possible, Is this machine still SMP? What will lscpu (or cat
/proc/cpuinfo) dump?Thx!
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20161021/42ebef5d/attachment-0001.html------------------------------
Message: 2
Date: Fri, 21 Oct 2016 06:48:16 +0200
From: Felix Bytow <[email protected]>
Subject: Re: Is that possible to implement a single machine with
heterogeneous architecture.
To: kernelnewbies at kernelnewbies.org
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"That question reminds me of this:
https://www.kickstarter.com/projects/udoo/udoo-x86-the-most-powerful-maker-board-ever/description
It is basically a hybrid of an x86 cpu and a microcontroller. Don't know if that counts for you^^
Am 21.10.2016 um 05:10 schrieb Douglas Su:
Quoted 15 lines
Hello everyone,
Is that possible to install multiple CPUs which have different architecture on a single machine? For example, on a single machine with two different cpu sockets for X86 and MIPS cpu respectively, and these two cpus are inter-connected with some sorts of bus (PCI or other advanced buses).
If it is possible, Is this machine still SMP? What will lscpu (or cat
/proc/cpuinfo) dump?Quoted 8 lines
Thx!
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20161021/c4e31dfc/attachment-0001.html------------------------------
Message: 3
Date: Fri, 21 Oct 2016 09:49:49 -0400
From: Valdis.Kletnieks at vt.edu
Subject: Re: Is that possible to implement a single machine with
heterogeneous architecture.
To: Douglas Su <[email protected]>
Cc: kernelnewbies <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset="us-ascii"Quoted 1 line · Douglas Su
Is that possible to install multiple CPUs which have different
architecture
Quoted 1 line
on a single machine? For example, on a single machine with two different
cpu
Quoted 2 lines
sockets for X86 and MIPS cpu respectively, and these two cpus are inter-connected with some sorts of bus (PCI or other advanced buses).
Is it possible? Probably.
Is it worth the effort? Probably not - I suspect that things like the IBM Power-based Cell architecture (used in the Playstation 3 and the Blue Gene supercomputers), or GPU accelerators from NVidia, are as far as you can reasonably stretch the idea.
For starters, you'd probably *not* be able to do a full SMP (symmetric multi
processing) - at best you'll probably get an asymmetric system where only one processor architecture can handle things like interrupts and scheduling,
and one architecture basically only run userspace compute code.Going any further will end up requiring *two* copies of kernel code (one for
each architecture), and figuring out how to merge the interrupt vectors
for the two architectures. Then you get into other ugly stuff like
handling
differing virtual memory layouts, keeping two sets of page tables in sync, and so on.And $DEITY help you if the two architectures are different endian-ness.
In the dim dark past (1989-ish) I actually had to sysadmin a system that was a
heterogeneous cluster - an IBM 3090 running AIX/370 and a network of i386-based
IBM PS2's) running a variant of AIX 1.2, and clustering software from Locus,
branded as TCF (Transparent Computing Facility). Total nightmare for the sysadmin - users were *always* forgetting which node they did a compile on, so
they'd end up with a bunch of .o files compile for the 3090, and some for i386,
and wonder why their program wouldn't link. And that was just the *start* of
the headaches - when IBM shipped AIX 3.1 for the RS/6000 Power line, we were
early adopters and migrated away from TCF.I'll note that although IBM went on to support Unix-based systems on the System/370 architecture (AIX/ESA, and now Linux), TCF was quietly swept into the dustbin of history.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 484 bytes
Desc: not available
Url :
http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20161021/870334aa/attachment-0001.bin------------------------------
Quoted 9 lines
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbiesEnd of Kernelnewbies Digest, Vol 71, Issue 26
*********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20161021/4bca2189/attachment.html
Quoted 2 lines · Laurence Rochfort
The BBC Micro which was 6502 based had an add on that let you connect a Z80 straight onto the same bus.
If I remember correctly, that one was basically an either/or - you could
boot the 6502, or the Z80, but you couldn't run both at the same time....
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 484 bytes
Desc: not available
Url : http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20161021/5a05ec1c/attachment.bin
Ah yes, you're correct. The Z80 ran the program and the 6502 then handled I/O.
https://en.wikipedia.org/wiki/Tube_%28BBC_Micro%29?wprov=sfla1
Quoted 9 lines · On Fri, 21 Oct 2016, 18:40 , <[email protected]> wrote:
Quoted 1 line · Laurence Rochfort
The BBC Micro which was 6502 based had an add on that let you connect a
Z80
Quoted 1 line
straight onto the same bus.
If I remember correctly, that one was basically an either/or - you could boot the 6502, or the Z80, but you couldn't run both at the same time....
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20161021/c3a97ef0/attachment-0001.html
omap watchdog
In reply to Laurence RochfortHello everybody
I was looking into an issue with the omap-wdt.c. The watchdog driver not is reporting a different boot status when a reset is being triggered by the watchdog.
Quoted 1 line
From what I gathered, the issue is that in the
omap_wdt_probefunction,
pdev->dev->platform_data requires to be a reference to the PRM module, however it has not been set, and I was wondering how this should work in an environment that uses the device tree method. (Link to usage:
http://lxr.free-electrons.com/source/drivers/watchdog/omap_wdt.c#L268 ).
My questions are as follows:
1) Is my assertion correct that the current method does not work when the driver is being initialised from an device tree instead of a old style board file.
2) If that is the case, what would be the best method of fixing this situation.
Thank you very much in advance.
omap watchdog
Seems a bug to me, you should post it to linux-omap :)
Regards,
2016-10-27 6:14 GMT-02:00 Cor Peters <[email protected]>:
Quoted 25 lines
Hello everybody
I was looking into an issue with the
omap-wdt.c. The watchdog driver not is reporting a different boot status when a reset is being triggered by the watchdog.Quoted 1 line
From what I gathered, the issue is that in the
omap_wdt_probefunction,
pdev->dev->platform_datarequires to be a reference to the PRM module, however it has not been set, and I was wondering how this should work in an environment that uses the device tree method. (Link to usage:
http://lxr.free-electrons.com/source/drivers/watchdog/omap_wdt.c#L268 ).My questions are as follows:
1) Is my assertion correct that the current method does not work when the driver is being initialised from an device tree instead of a old style board file.
2) If that is the case, what would be the best method of fixing this situation.Thank you very much in advance.
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
Signature · 2 lines
"Do or do not. There is no try" Yoda Master