Skip to contentSkip to conversation

Kernelnewbies Digest, Vol 77, Issue 7

DISCUSSION Tran Ly Vu 7 participants 9 messages Apr 12, 2017 – Apr 16, 2017 1 message not in the archive

lore
Share & tools
lore

Tran Ly Vu

author
#1 lore raw
In reply to a message not in the archive

HI,

I have signed up for the eudyptula challenge to start off.

How exactly do i start to contribute to linux community, i.e fix bug, etc

Thanks

Quoted 187 lines · kernelnewbies-request at kernelnewbies.org

Send Kernelnewbies mailing list submissions to
kernelnewbies at kernelnewbies.org

To subscribe or unsubscribe via the World Wide Web, visit
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
or, via email, send a message with subject or body 'help' to
kernelnewbies-request at kernelnewbies.org

You can reach the person managing the list at
kernelnewbies-owner at kernelnewbies.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of Kernelnewbies digest..."

Today's Topics:

1. Re: Welcome to the "Kernelnewbies" mailing list
(juan pedro meri?o)
2. Re: Welcome to the "Kernelnewbies" mailing list (Lino Sanfilippo)
3. Btrfs Questions for Personal Data Archive (nick)

----------------------------------------------------------------------

Message: 1
Date: Mon, 10 Apr 2017 19:10:46 -0500
From: juan pedro meri?o <[email protected]>
Subject: Re: Welcome to the "Kernelnewbies" mailing list
To: kernelnewbies at kernelnewbies.org
Message-ID:
<CAC8C0kTRaN9jnk72K26YB8ZRBcnBbirGXE6NYL-stfv1vYc5Gg@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Hi!

I have been looking at versions 1,2,3 and 4 of the linux kernel. I would like to know what are the programs for the kernel development environment. To test them and add new features.

Thank you very much!

Quoted 31 lines · On Mon, Apr 10, 2017 at 7:05 PM, <[email protected]>…

Welcome to the Kernelnewbies at kernelnewbies.org mailing list! Welcome to the kernelnewbies mailing list. Please see
http://lists.kernelnewbies.org/ to change membership info and preferences.

To post to this list, send your email to:

kernelnewbies at kernelnewbies.org

General information about the mailing list is at:

https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at:

https://lists.kernelnewbies.org/mailman/options/kernelnewbies/juapdiaz%
40gmail.com

You can also make such adjustments via email by sending a message to:

Kernelnewbies-request at kernelnewbies.org

with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions.

You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is:

Quoted 8 lines

juanpepe

Normally, Mailman will remind you of your kernelnewbies.org mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20170410/d61d3900/attachment-0001.html

------------------------------

Message: 2
Date: Tue, 11 Apr 2017 02:50:06 +0200
From: Lino Sanfilippo <[email protected]>
Subject: Re: Welcome to the "Kernelnewbies" mailing list
To: juan pedro meri?o <[email protected]>,
kernelnewbies at kernelnewbies.org
Message-ID: <[email protected]>
Content-Type: text/plain; charset=windows-1252

Hi,

Quoted 7 lines · juan pedro meri?o

Hi!

I have been looking at versions 1,2,3 and 4 of the linux kernel. I would like to know what are the programs for the kernel development environment. To test them and add new features.

Thank you very much!

Please take a look at this site:

https://www.kernel.org/doc/html/latest/dev-tools/index.html

I suggest that you also take a look at the eudyptula challenge:
http://eudyptula-challenge.org/

Quoted 5 lines
Quoted 5 lines

You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is:

juanpepe

Did you notice that you have just made your password public to the whole world?

Regards,
Lino

------------------------------

Message: 3
Date: Mon, 10 Apr 2017 23:28:31 -0400
From: nick <[email protected]>
Subject: Btrfs Questions for Personal Data Archive
To: kernelnewbies <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8

Greetings All,
I am assuming this is coming from me it's just going to get no reply. However if someone who works on btrfs is willing to reply to this I have a few questions. Firstly I have a lot of personal storage for archiving various things probably around ~37TB filled currently in external drives and estimate the archive to grow to around ~300 to 400 TB. All of these numbers are unformatted for people's information. I have been using btrfs but need to ask a few questions for how to create a central archive best:

1.Does the compression algorithms used as according to my knowledge they don't do it well enough to enable it for non text files? What are the performance disadvantages from a IO perspective(I can Google this but I want numbers from someone who works in a data center)? This is primary due to the central archive needing to be used for many different systems at a time. I assume around 3-4 on average maybe more including during a rebuild. Some of it is also hit bit rate encodes I have done for bluray which are around 10-22mbps per second and may need to be watched during a raid rebuild. GPU processing will be client side so don't worry about that.

2. Same as above but for software raid versus hardware raid in btrfs.I am stressing rebuild time here on a raid 5/6. Probably going to use raid 60 as that gives me a mirror plus two drives failure for redundancy.

3. I have found very little information on this but does the metadata being on a SSD actually help with performance? Very little information exist off the wiki for this. I literally goggled for a few hours and found very little even in terms of papers.

Further more the archive is going to be on external hard drives for a while, as hard drives are not big enough. If people want more information or have advice on how to scale this out that would be very helpful. Generally I am looking for information related to btrfs.

If anyone replies huge thanks,
Nick
P.S. If anyone tells me to send my questions to the btrfs list I did some stupid things and was banned from vger so I am just sending it here for now.

------------------------------

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

End of Kernelnewbies Digest, Vol 77, Issue 7
********************************************

Signature · 1 line
Spending hours typing this email ...just for YOU -The Incredible- and no one else!
#2 lore raw

Hi Tran Ly Vu,

Quoted 1 line

How exactly do i start to contribute to linux community, i.e fix bug, etc

Below are my suggestions:

(1) Select a module which you are interested;
(2) Dive into the source code; subscribe the related mailing list and concentrate on the news& updates of this module;
(3) After you are familiar with this module, you can take part in it: add feature, fix bug, etc.

Best Regards
Nan Xiao

Quoted 232 lines · Tran Ly Vu

HI,

I have signed up for the eudyptula challenge to start off.

How exactly do i start to contribute to linux community, i.e fix bug, etc

Thanks

Quoted 25 lines · kernelnewbies-request at kernelnewbies.org

Send Kernelnewbies mailing list submissions to
kernelnewbies at kernelnewbies.org

To subscribe or unsubscribe via the World Wide Web, visit
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
or, via email, send a message with subject or body 'help' to
kernelnewbies-request at kernelnewbies.org

You can reach the person managing the list at
kernelnewbies-owner at kernelnewbies.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of Kernelnewbies digest..."

Today's Topics:

1. Re: Welcome to the "Kernelnewbies" mailing list
(juan pedro meri?o)
2. Re: Welcome to the "Kernelnewbies" mailing list (Lino Sanfilippo)
3. Btrfs Questions for Personal Data Archive (nick)

----------------------------------------------------------------------

Quoted 7 lines

Message: 1
Date: Mon, 10 Apr 2017 19:10:46 -0500
From: juan pedro meri?o <[email protected]>
Subject: Re: Welcome to the "Kernelnewbies" mailing list
To: kernelnewbies at kernelnewbies.org Message-ID:

      <CAC8C0kTRaN9jnk72K26YB8ZRBcnBbirGXE6NYL-stfv1vYc5Gg@mail.

gmail.com>

Quoted 6 lines

Content-Type: text/plain; charset="utf-8"

Hi!

I have been looking at versions 1,2,3 and 4 of the linux kernel. I would like to know what are the programs for the kernel development

environment.

Quoted 5 lines

To test them and add new features.

Thank you very much!

On Mon, Apr 10, 2017 at 7:05 PM, <kernelnewbies-request@

kernelnewbies.org>

Quoted 13 lines
Quoted 11 lines · wrote:

Welcome to the Kernelnewbies at kernelnewbies.org mailing list! Welcome to the kernelnewbies mailing list. Please see
http://lists.kernelnewbies.org/ to change membership info and preferences.

To post to this list, send your email to:

kernelnewbies at kernelnewbies.org

General information about the mailing list is at:

Quoted 7 lines
Quoted 7 lines

https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at:

https://lists.kernelnewbies.org/mailman/options/

kernelnewbies/juapdiaz%

Quoted 21 lines
Quoted 13 lines

40gmail.com

You can also make such adjustments via email by sending a message to:

Kernelnewbies-request at kernelnewbies.org

with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions.

You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is:

Quoted 8 lines

juanpepe

Normally, Mailman will remind you of your kernelnewbies.org mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you.

Quoted 3 lines

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/

attachments/20170410/d61d3900/attachment-0001.html

Quoted 12 lines

------------------------------

Message: 2
Date: Tue, 11 Apr 2017 02:50:06 +0200
From: Lino Sanfilippo <[email protected]>
Subject: Re: Welcome to the "Kernelnewbies" mailing list
To: juan pedro meri?o <[email protected]>,
kernelnewbies at kernelnewbies.org
Message-ID: <[email protected]>
Content-Type: text/plain; charset=windows-1252

Quoted 7 lines

Hi,

Quoted 4 lines · juan pedro meri?o

Hi!

I have been looking at versions 1,2,3 and 4 of the linux kernel. I would like to know what are the programs for the kernel development

environment.

Quoted 11 lines
Quoted 3 lines

To test them and add new features.

Thank you very much!

Please take a look at this site:

https://www.kernel.org/doc/html/latest/dev-tools/index.html

I suggest that you also take a look at the eudyptula challenge:
http://eudyptula-challenge.org/

Quoted 6 lines
Quoted 5 lines
Quoted 5 lines

You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is:

juanpepe

Did you notice that you have just made your password public to the whole

world?

Quoted 17 lines

Regards,
Lino

------------------------------

Message: 3
Date: Mon, 10 Apr 2017 23:28:31 -0400
From: nick <[email protected]>
Subject: Btrfs Questions for Personal Data Archive
To: kernelnewbies <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8

Quoted 2 lines

Greetings All,
I am assuming this is coming from me it's just going to get no reply.

However if someone

Quoted 1 line

who works on btrfs is willing to reply to this I have a few questions.

Firstly I have a

Quoted 1 line

lot of personal storage for archiving various things probably around

~37TB filled currently

Quoted 1 line

in external drives and estimate the archive to grow to around ~300 to

400 TB. All of

Quoted 1 line

these numbers are unformatted for people's information. I have been

using btrfs but

Quoted 3 lines

need to ask a few questions for how to create a central archive best:

1.Does the compression algorithms used as according to my knowledge they

don't do

Quoted 1 line

it well enough to enable it for non text files? What are the performance

disadvantages

Quoted 1 line

from a IO perspective(I can Google this but I want numbers from someone

who works

Quoted 1 line

in a data center)? This is primary due to the central archive needing to

be used

Quoted 1 line

for many different systems at a time. I assume around 3-4 on average

maybe more

Quoted 1 line

including during a rebuild. Some of it is also hit bit rate encodes I

have done

Quoted 1 line

for bluray which are around 10-22mbps per second and may need to be

watched during

Quoted 1 line

a raid rebuild. GPU processing will be client side so don't worry about

that.

Quoted 2 lines

2. Same as above but for software raid versus hardware raid in btrfs.I

am stressing

Quoted 1 line

rebuild time here on a raid 5/6. Probably going to use raid 60 as that

gives me

Quoted 3 lines

a mirror plus two drives failure for redundancy.

3. I have found very little information on this but does the metadata

being on a SSD

Quoted 1 line

actually help with performance? Very little information exist off the

wiki for this.

Quoted 1 line

I literally goggled for a few hours and found very little even in terms

of papers.

Quoted 2 lines

Further more the archive is going to be on external hard drives for a

while, as hard

Quoted 1 line

drives are not big enough. If people want more information or have

advice on how

Quoted 1 line

to scale this out that would be very helpful. Generally I am looking for

information

Quoted 5 lines

related to btrfs.

If anyone replies huge thanks,
Nick
P.S. If anyone tells me to send my questions to the btrfs list I did

some stupid things and

Quoted 6 lines

was banned from vger so I am just sending it here for now.

------------------------------

Quoted 8 lines

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

End of Kernelnewbies Digest, Vol 77, Issue 7
********************************************

--
Spending hours typing this email ...just for YOU -The Incredible- and no one else!

Quoted 5 lines

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20170412/12d71921/attachment.html

#3 lore raw

Hello all,

I would suggest to peruse https://kernelnewbies.org/.

BR,
Sebastien.

Quoted 298 lines · Nan Xiao

Hi Tran Ly Vu,

Quoted 1 line

How exactly do i start to contribute to linux community, i.e fix

bug, etc

Below are my suggestions:

(1) Select a module which you are interested;
(2) Dive into the source code; subscribe the related mailing list and concentrate on the news& updates of this module;
(3) After you are familiar with this module, you can take part in it:
add feature, fix bug, etc.

Best Regards
Nan Xiao

Quoted 28 lines · Tran Ly Vu

HI,

I have signed up for the eudyptula challenge to start off.

How exactly do i start to contribute to linux community, i.e fix bug, etc

Thanks

Quoted 5 lines · kernelnewbies-request at kernelnewbies.org

Send Kernelnewbies mailing list submissions to kernelnewbies at kernelnewbies.org

To subscribe or unsubscribe via the World Wide Web, visit

https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies [1]

Quoted 7 lines

or, via email, send a message with subject or body 'help' to kernelnewbies-request at kernelnewbies.org

You can reach the person managing the list at kernelnewbies-owner at kernelnewbies.org

When replying, please edit your Subject line so it is more

specific

Quoted 3 lines

than "Re: Contents of Kernelnewbies digest..."

Quoted 11 lines
Quoted 5 lines

Today's Topics:

1. Re: Welcome to the "Kernelnewbies" mailing list (juan pedro meri?o)
2. Re: Welcome to the "Kernelnewbies" mailing list (Lino

Sanfilippo)

Quoted 4 lines

3. Btrfs Questions for Personal Data Archive (nick)

----------------------------------------------------------------------

Quoted 36 lines
Quoted 8 lines

Message: 1
Date: Mon, 10 Apr 2017 19:10:46 -0500
From: juan pedro meri?o <[email protected]>
Subject: Re: Welcome to the "Kernelnewbies" mailing list
To: kernelnewbies at kernelnewbies.org Message-ID:

<CAC8C0kTRaN9jnk72K26YB8ZRBcnBbirGXE6NYL-stfv1vYc5Gg@mail.gmail.com>

Quoted 5 lines

Content-Type: text/plain; charset="utf-8"

Hi!

I have been looking at versions 1,2,3 and 4 of the linux kernel.

I would

Quoted 1 line

like to know what are the programs for the kernel development

environment.

Quoted 5 lines

To test them and add new features.

Thank you very much!

On Mon, Apr 10, 2017 at 7:05 PM,

<[email protected]>

Quoted 3 lines
Quoted 1 line · wrote:

Welcome to the Kernelnewbies at kernelnewbies.org mailing list!

Welcome

Quoted 2 lines
Quoted 2 lines

to the kernelnewbies mailing list. Please see
http://lists.kernelnewbies.org/ [2] to change membership info

and

Quoted 6 lines
Quoted 6 lines

preferences.

To post to this list, send your email to:

kernelnewbies at kernelnewbies.org

Quoted 12 lines
Quoted 3 lines
Quoted 3 lines

General information about the mailing list is at:

https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies [1]

Quoted 2 lines
Quoted 2 lines

If you ever want to unsubscribe or change your options (eg,

switch to

Quoted 4 lines
Quoted 4 lines

or from digest mode, change your password, etc.), visit your subscription page at:

https://lists.kernelnewbies.org/mailman/options/kernelnewbies/juapdiaz%

Quoted 18 lines

[3]

Quoted 4 lines
Quoted 4 lines

40gmail.com [4]

You can also make such adjustments via email by sending a

message to:

Quoted 7 lines
Quoted 7 lines

Kernelnewbies-request at kernelnewbies.org

with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions.

You must know your password to change your options (including

changing

Quoted 4 lines
Quoted 4 lines

the password, itself) or to unsubscribe. It is:

juanpepe

Quoted 13 lines
Quoted 1 line
Quoted 1 line

Normally, Mailman will remind you of your kernelnewbies.org [5]

mailing

Quoted 1 line
Quoted 1 line

list passwords once every month, although you can disable this

if you

Quoted 2 lines
Quoted 2 lines

prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a

button on

Quoted 5 lines
Quoted 2 lines

your options page that will email your current password to you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:

http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20170410/d61d3900/attachment-0001.html

Quoted 130 lines

[6]

Quoted 12 lines

------------------------------

Message: 2
Date: Tue, 11 Apr 2017 02:50:06 +0200
From: Lino Sanfilippo <[email protected]>
Subject: Re: Welcome to the "Kernelnewbies" mailing list
To: juan pedro meri?o <[email protected]>, kernelnewbies at kernelnewbies.org
Message-ID: <[email protected]>
Content-Type: text/plain; charset=windows-1252

Quoted 6 lines

Hi,

Quoted 3 lines · juan pedro meri?o

Hi!

I have been looking at versions 1,2,3 and 4 of the linux kernel.

I would

Quoted 1 line
Quoted 1 line

like to know what are the programs for the kernel development

environment.

Quoted 12 lines
Quoted 3 lines

To test them and add new features.

Thank you very much!

Please take a look at this site:

https://www.kernel.org/doc/html/latest/dev-tools/index.html [7]

I suggest that you also take a look at the eudyptula challenge:
http://eudyptula-challenge.org/ [8]

Quoted 1 line
Quoted 1 line

You must know your password to change your options (including

changing

Quoted 5 lines
Quoted 4 lines
Quoted 4 lines

the password, itself) or to unsubscribe. It is:

juanpepe

Did you notice that you have just made your password public to

the whole world?

Quoted 17 lines

Regards,
Lino

------------------------------

Message: 3
Date: Mon, 10 Apr 2017 23:28:31 -0400
From: nick <[email protected]>
Subject: Btrfs Questions for Personal Data Archive
To: kernelnewbies <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8

Quoted 2 lines

Greetings All,
I am assuming this is coming from me it's just going to get no

reply. However if someone

Quoted 1 line

who works on btrfs is willing to reply to this I have a few

questions. Firstly I have a

Quoted 1 line

lot of personal storage for archiving various things probably

around ~37TB filled currently

Quoted 1 line

in external drives and estimate the archive to grow to around

~300 to 400 TB. All of

Quoted 1 line

these numbers are unformatted for people's information. I have

been using btrfs but

Quoted 1 line

need to ask a few questions for how to create a central archive

best:

Quoted 2 lines

1.Does the compression algorithms used as according to my

knowledge they don't do

Quoted 1 line

it well enough to enable it for non text files? What are the

performance disadvantages

Quoted 1 line

from a IO perspective(I can Google this but I want numbers from

someone who works

Quoted 1 line

in a data center)? This is primary due to the central archive

needing to be used

Quoted 1 line

for many different systems at a time. I assume around 3-4 on

average maybe more

Quoted 1 line

including during a rebuild. Some of it is also hit bit rate

encodes I have done

Quoted 1 line

for bluray which are around 10-22mbps per second and may need to

be watched during

Quoted 1 line

a raid rebuild. GPU processing will be client side so don't worry

about that.

Quoted 2 lines

2. Same as above but for software raid versus hardware raid in

btrfs.I am stressing

Quoted 1 line

rebuild time here on a raid 5/6. Probably going to use raid 60 as

that gives me

Quoted 3 lines

a mirror plus two drives failure for redundancy.

3. I have found very little information on this but does the

metadata being on a SSD

Quoted 1 line

actually help with performance? Very little information exist off

the wiki for this.

Quoted 1 line

I literally goggled for a few hours and found very little even in

terms of papers.

Quoted 2 lines

Further more the archive is going to be on external hard drives

for a while, as hard

Quoted 1 line

drives are not big enough. If people want more information or

have advice on how

Quoted 1 line

to scale this out that would be very helpful. Generally I am

looking for information

Quoted 5 lines

related to btrfs.

If anyone replies huge thanks,
Nick
P.S. If anyone tells me to send my questions to the btrfs list I

did some stupid things and

Quoted 10 lines

was banned from vger so I am just sending it here for now.

------------------------------

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

[1]

Quoted 4 lines

End of Kernelnewbies Digest, Vol 77, Issue 7
********************************************

Quoted 8 lines

--
Spending hours typing this email ...just for YOU -The Incredible- and no one else!

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies [1]

Links:
------
[1] https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
[2] http://lists.kernelnewbies.org/
[3]
https://lists.kernelnewbies.org/mailman/options/kernelnewbies/juapdiaz%
[4] http://40gmail.com
[5] http://kernelnewbies.org
[6]
http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20170410/d61d3900/attachment-0001.html
[7] https://www.kernel.org/doc/html/latest/dev-tools/index.html
[8] http://eudyptula-challenge.org/

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

#4 lore raw

How to contribute (was Re: Kernelnewbies Digest, Vol 77, Issue 7

In reply to Tran Ly Vu
Quoted 1 line · Tran Ly Vu

How exactly do i start to contribute to linux community, i.e fix bug, etc

Step 0: Figure out *why* you want to contribute to the Linux kernel.

Did your boss just tell you that you have 6 weeks to write a driver for your company's new widget?

Do you have a device that doesn't have Linux support?

Is your kernel crashing/misbehaving?

Do you have an intense interest in filesystems, or memory management, or networking, or process scheduling, or other aspect of kernels?

Do you just want to give back to the community?

Did you think it was a good way to attract members of the appropriate gender?

What you do next will depend on *why* you're here, and what your current technical skills are.

Note that asking others for what you should do is as bad an idea as asking people whether you should write a murder mystery or a romance novel, and for exactly the same reason. If you're doing it because somebody else suggested it but you don't care for it, the results will be bad.

Though if you just want to give back to the community, the easiest thing to do, and the most useful, is to build and boot linux-next kernels and see if anything breaks on your system. We have *lots* of people slinging code, and not so many testing. And testing is easier than coding. :)

Here's the cheat sheet for linux-next:

$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
$ cd linux
$ git remote add linux-next git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
$ git fetch linux-next
$ git fetch --tags linux-next

(now get a .config file - grabbing your distro's config is a good place to start. 'make locallmodconfig' if you want a faster build by not building device driver modules for devices you don't have.
Then do a 'make' and install/boot your kernel. Google for detailed instructions for how to build/install your own kernel on your distro

... # later on - do this once every 1-3 weeks or as time permits

$ git remote update
$ make oldconfig
$ make
(install as above)
Boot it, and report any problems.

Do *not* do a 'git pull' to get the most recent linux-next, it won't do what you think.

Yes, it really *is* that simple.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 484 bytes
Desc: not available
Url : http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20170412/550e6fea/attachment.bin

#5 lore raw

How to contribute (was Re: Kernelnewbies Digest, Vol 77, Issue 7

Quoted 63 lines · valdis.kletnieks at vt.edu
Quoted 1 line · Tran Ly Vu

How exactly do i start to contribute to linux community, i.e fix bug, etc

Step 0: Figure out *why* you want to contribute to the Linux kernel.

Did your boss just tell you that you have 6 weeks to write a driver for your company's new widget?

Do you have a device that doesn't have Linux support?

Is your kernel crashing/misbehaving?

Do you have an intense interest in filesystems, or memory management, or networking, or process scheduling, or other aspect of kernels?

Do you just want to give back to the community?

Did you think it was a good way to attract members of the appropriate gender?

What you do next will depend on *why* you're here, and what your current technical skills are.

Note that asking others for what you should do is as bad an idea as asking people whether you should write a murder mystery or a romance novel, and for exactly the same reason. If you're doing it because somebody else suggested it but you don't care for it, the results will be bad.

Though if you just want to give back to the community, the easiest thing to do, and the most useful, is to build and boot linux-next kernels and see if anything breaks on your system. We have *lots* of people slinging code, and not so many testing. And testing is easier than coding. :)

Here's the cheat sheet for linux-next:

$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
$ cd linux
$ git remote add linux-next git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
$ git fetch linux-next
$ git fetch --tags linux-next

(now get a .config file - grabbing your distro's config is a good place to start. 'make locallmodconfig' if you want a faster build by not building device driver modules for devices you don't have.
Then do a 'make' and install/boot your kernel. Google for detailed instructions for how to build/install your own kernel on your distro

... # later on - do this once every 1-3 weeks or as time permits

$ git remote update
$ make oldconfig
$ make
(install as above)
Boot it, and report any problems.

Do *not* do a 'git pull' to get the most recent linux-next, it won't do what you think.

Yes, it really *is* that simple.

Quoted 4 lines

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Hey, that's quite interesting.

(And Hi, I'm really new here)

So, the best "branch" of developement to test if it doesn't break our system is the linux-next branch, or the mainline kernel (currently tagged by Linus as 4.11-RC6) ?

I'm currently trying to understand how kernel developement is actually organized, here's what I've understood

Developers pull the code fror the next kernel release (mainline? linux-next?) and make changes. They gett the diff of theses changes (patches), and send them by mail to the relevent maintainers and mailing lists.

Maintainers approves (or discuss) the changes, and acked/sign them off.

Quoted 1 line

From there, where are the patches going? To Linux Next? or th Linus's

mainline tree?

- In the mean time, Linux get patches from trusted mainaines into he's own tree while working on what will become the next kernel version. After a while, he decide to not accept "new features" patches for that version, only bugfixes. That's when he's doing "release candidates" of the kernel. After multiple of these, when eveything is "ready", the new kernel is released. For example, the next one will be 4.11.

- Once that is done, Linux start's working on getting the patches from 4.12 in the same way, while the maintainer for the "stable" kernel, port back the important fixes to the current kernel. That's hw we get kernels like the 4.10.9 that I'm currently running (Just got out of my distro's testing process. ArchLinux holds binary packages in a "testing" repository before putting them in "core" Arch. That's off-topic).

So, how "linux-next" works ? Is that a "testing ground" for new kernel patches? When/how does the changes the maintainers accepted are merged into the mainline kernel? ^^"

Oh, and, I almost forgot : If I try to use a linux-next kenrel, and things breaks, who do I tell? ^^"

Sorry if that's a lot of questions, but I'm fairly curious right now

Thanks in advance,

Arthur Brainville

#6 lore raw

How to contribute (was Re: Kernelnewbies Digest, Vol 77, Issue 7

Quoted 3 lines · Arthur Brainville (Ybalrid)

So, the best "branch" of developement to test if it doesn't break our system is the linux-next branch, or the mainline kernel (currently tagged by Linus as 4.11-RC6) ?

Depends how brave you are. Linus is currently at -rc6, and linux-next *should* be what will become 4.12. (Should be, as in "4.11 is at -rc5, so people *should* already have sent maintainers patches for the next release").

Quoted 2 lines

I'm currently trying to understand how kernel developement is actually organized, here's what I've understood

You're a bit off...

Quoted 3 lines

So, how "linux-next" works ? Is that a "testing ground" for new kernel patches? When/how does the changes the maintainers accepted are merged into the mainline kernel? ^^"

And explaining how you're off answers this question as well... :)

Here's how it works..

Developers create patches. See Documentation/process/submitting-patches.rst for the details on that.

They then e-mail those to maintainers. See MAINTAINERS for the canonical list.

Maintainers then review the patches, and if there's an issue, e-mail back to the submitter with an explanation of the issue. If the patch is OK, the maintainer puts it into his git tree (usually with 'git am').

There may be several levels of sub-maintainer. For instance, somebody may maintain a driver for one specific USB sound card. They feed those patches to the USB sound maintainer, who then feeds it to the USB subsystem maintainer. That gets done by the higher-up maintainer doing a 'git pull' of the appropriate tree.

In addition, most of the trees *also* get pulled every day and built into 'linux-next', to find merge conflicts and provide a test kernel.

So at this point, we have top-level maintainers with trees full of patches.

At some point, Linus tags the final V4.11. This opens the "merge window". For 2 weeks, Linus does 'git pull' from all the maintainers and merges it to his tree, and then tags V4.12-rc1, which closes the merge window. During the merge window, most maintainers will not accept new patches, because there's a chance that a patch could come in and be immediately merged upstream without
having appeared in several linux-next dailys - so no testing. Once the
window is closed, maintainers start collecting patches for the v4.13 cycle, and only sending Linus bugfixes and minor stuff between 4.12-rc1 and final 4.12

Lather, rinse, repeat. release, merge cycle, -rc1, collect patches for next release, -rc8 (or so) and another release....

Quoted 2 lines

Oh, and, I almost forgot : If I try to use a linux-next kenrel, and things breaks, who do I tell? ^^"

Depends how granular you can identify the issue. If you do a 'git bisect'
of a problem, you can narrow it down to a specific patch, you mail the patch
author, the maintainer, any subsystem-specific list, and the linux-kernel list.
If you just know "USB is hosed", you send it to the USB list and linux-kernel,
and if you have *no* idea, toss it to linux-kernel.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 484 bytes
Desc: not available
Url : http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20170412/46ea96a6/attachment.bin

#7 lore raw

How to contribute (was Re: Kernelnewbies Digest, Vol 77, Issue 7

Quoted 67 lines · valdis.kletnieks at vt.edu
Quoted 3 lines · Arthur Brainville (Ybalrid)

So, the best "branch" of developement to test if it doesn't break our system is the linux-next branch, or the mainline kernel (currently tagged by Linus as 4.11-RC6) ?

Depends how brave you are. Linus is currently at -rc6, and linux-next *should* be what will become 4.12. (Should be, as in "4.11 is at -rc5, so people *should* already have sent maintainers patches for the next release").

Quoted 2 lines

I'm currently trying to understand how kernel developement is actually organized, here's what I've understood

You're a bit off...

Quoted 3 lines

So, how "linux-next" works ? Is that a "testing ground" for new kernel patches? When/how does the changes the maintainers accepted are merged into the mainline kernel? ^^"

And explaining how you're off answers this question as well... :)

Here's how it works..

Developers create patches. See Documentation/process/submitting-patches.rst for the details on that.

They then e-mail those to maintainers. See MAINTAINERS for the canonical list.

Maintainers then review the patches, and if there's an issue, e-mail back to the submitter with an explanation of the issue. If the patch is OK, the maintainer puts it into his git tree (usually with 'git am').

There may be several levels of sub-maintainer. For instance, somebody may maintain a driver for one specific USB sound card. They feed those patches to the USB sound maintainer, who then feeds it to the USB subsystem maintainer. That gets done by the higher-up maintainer doing a 'git pull' of the appropriate tree.

In addition, most of the trees *also* get pulled every day and built into 'linux-next', to find merge conflicts and provide a test kernel.

So at this point, we have top-level maintainers with trees full of patches.

At some point, Linus tags the final V4.11. This opens the "merge window". For 2 weeks, Linus does 'git pull' from all the maintainers and merges it to his tree, and then tags V4.12-rc1, which closes the merge window. During the merge window, most maintainers will not accept new patches, because there's a chance that a patch could come in and be immediately merged upstream without
having appeared in several linux-next dailys - so no testing. Once the
window is closed, maintainers start collecting patches for the v4.13 cycle, and only sending Linus bugfixes and minor stuff between 4.12-rc1 and final 4.12

Lather, rinse, repeat. release, merge cycle, -rc1, collect patches for next release, -rc8 (or so) and another release....

Quoted 2 lines

Oh, and, I almost forgot : If I try to use a linux-next kenrel, and things breaks, who do I tell? ^^"

Depends how granular you can identify the issue. If you do a 'git bisect' of a problem, you can narrow it down to a specific patch, you mail the patch author, the maintainer, any subsystem-specific list, and the linux-kernel list. If you just know "USB is hosed", you send it to the USB list and linux-kernel, and if you have *no* idea, toss it to linux-kernel.

Quoted 4 lines

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Thanks for the explaination!

Indeed I was quite a bit off, now I know the process better ;-)

Regards,
Arthur Brainville

#8 lore raw

How to contribute (was Re: Kernelnewbies Digest, Vol 77, Issue 7

In reply to valdis.kletnieks at vt.edu
Quoted 48 lines · valdis.kletnieks at vt.edu
Quoted 1 line · Tran Ly Vu

How exactly do i start to contribute to linux community, i.e fix bug, etc

Step 0: Figure out *why* you want to contribute to the Linux kernel.

Did your boss just tell you that you have 6 weeks to write a driver for your company's new widget?

Do you have a device that doesn't have Linux support?

Is your kernel crashing/misbehaving?

Do you have an intense interest in filesystems, or memory management, or networking, or process scheduling, or other aspect of kernels?

Do you just want to give back to the community?

Did you think it was a good way to attract members of the appropriate gender?

What you do next will depend on *why* you're here, and what your current technical skills are.

Note that asking others for what you should do is as bad an idea as asking people whether you should write a murder mystery or a romance novel, and for exactly the same reason. If you're doing it because somebody else suggested it but you don't care for it, the results will be bad.

Though if you just want to give back to the community, the easiest thing to do, and the most useful, is to build and boot linux-next kernels and see if anything breaks on your system. We have *lots* of people slinging code, and not so many testing. And testing is easier than coding. :)

Here's the cheat sheet for linux-next:

$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
$ cd linux
$ git remote add linux-next git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
$ git fetch linux-next
$ git fetch --tags linux-next

(now get a .config file - grabbing your distro's config is a good place to start. 'make locallmodconfig' if you want a faster build by not building device driver modules for devices you don't have.
Then do a 'make' and install/boot your kernel. Google for detailed instructions for how to build/install your own kernel on your distro

... # later on - do this once every 1-3 weeks or as time permits

Quoted 8 lines
$ git remote update
$ make oldconfig
$ make
(install as above)
Boot it, and report any problems.

Do *not* do a 'git pull' to get the most recent linux-next, it won't do what you think.

As far as I understand unless a git pull or fetch + merge/rebase is run, nothing would change locally. make oldconfig would result in the same config. Then what are we testing for here?

Thanks
Aishwarya

Quoted 11 lines

Yes, it really *is* that simple.

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

#9 lore raw

How to contribute (was Re: Kernelnewbies Digest, Vol 77, Issue 7

Quoted 55 lines · Aishwarya Pant
Quoted 54 lines · valdis.kletnieks at vt.edu
Quoted 1 line · Tran Ly Vu

How exactly do i start to contribute to linux community, i.e fix bug, etc

Step 0: Figure out *why* you want to contribute to the Linux kernel.

Did your boss just tell you that you have 6 weeks to write a driver for your company's new widget?

Do you have a device that doesn't have Linux support?

Is your kernel crashing/misbehaving?

Do you have an intense interest in filesystems, or memory management, or networking, or process scheduling, or other aspect of kernels?

Do you just want to give back to the community?

Did you think it was a good way to attract members of the appropriate gender?

What you do next will depend on *why* you're here, and what your current technical skills are.

Note that asking others for what you should do is as bad an idea as asking people whether you should write a murder mystery or a romance novel, and for exactly the same reason. If you're doing it because somebody else suggested it but you don't care for it, the results will be bad.

Though if you just want to give back to the community, the easiest thing to do, and the most useful, is to build and boot linux-next kernels and see if anything breaks on your system. We have *lots* of people slinging code, and not so many testing. And testing is easier than coding. :)

Here's the cheat sheet for linux-next:

$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
$ cd linux
$ git remote add linux-next git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
$ git fetch linux-next
$ git fetch --tags linux-next

(now get a .config file - grabbing your distro's config is a good place to start. 'make locallmodconfig' if you want a faster build by not building device driver modules for devices you don't have.
Then do a 'make' and install/boot your kernel. Google for detailed instructions for how to build/install your own kernel on your distro

... # later on - do this once every 1-3 weeks or as time permits

$ git remote update
$ make oldconfig
$ make
(install as above)
Boot it, and report any problems.
Quoted 6 lines
Quoted 2 lines

Do *not* do a 'git pull' to get the most recent linux-next, it won't do what you think.

As far as I understand unless a git pull or fetch + merge/rebase is run, nothing would change locally. make oldconfig would result in the same config. Then what are we testing for here?

git remote update
git tag --list "next-*"
git checkout -b branch_name next-201704xy

Quoted 21 lines

Thanks
Aishwarya

Quoted 11 lines

Yes, it really *is* that simple.

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies