Skip to contentSkip to conversation

U-Boot-Users Digest, Vol 5, Issue 43

U-Boot-Users Srinivasan 2 participants 3 messages Oct 15, 2006 – Oct 16, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Srinivasan

#1 lore raw

Hi,

I am trying to use U-boot 1.1.4 with the gccversion 3.4.3 (Montavista tool chain). U-Boot builds OK but no output on the serial port. The same U-boot source was working fine with the previous version of tool chain.

Have any one faced this problem before with the 3.4.3 tool chain.

Any suggestions would be very helpful.

Regards,
Nageswari.S

-----Original Message-----
From: [email protected] [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of u-boot-users-request at lists.sourceforge.net
Sent: Sunday, October 15, 2006 5:40 AM
To: u-boot-users at lists.sourceforge.net
Subject: U-Boot-Users Digest, Vol 5, Issue 43

Send U-Boot-Users mailing list submissions to
u-boot-users at lists.sourceforge.net

To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/u-boot-users
or, via email, send a message with subject or body 'help' to
u-boot-users-request at lists.sourceforge.net

You can reach the person managing the list at
u-boot-users-owner at lists.sourceforge.net

When replying, please edit your Subject line so it is more specific than "Re: Contents of U-Boot-Users digest..."

Today's Topics:

1. How to obtain the patched file? (mitsy)
2. people fade (Edwin Duke)

----------------------------------------------------------------------

Message: 1
Date: Fri, 13 Oct 2006 18:25:51 -0400
From: mitsy <[email protected]>
Subject: [U-Boot-Users] How to obtain the patched file?
To: u-boot-users at lists.sourceforge.net Message-ID:

	<[email protected]>

Content-Type: text/plain; charset=ISO-8859-1; format=flowed

What is the best way to get the latest file with certain patch? I'd like to get the NAND driver patch that was applied recently but CVS doesn't seem to have the change. I looked at git and the diff on the web interface of git, but modifying the file manually using the diff seem to be error prone.

Thank you for your help in advance!

------------------------------

Message: 2
Date: Sat, 14 Oct 2006 08:12:12 -0200
From: Edwin Duke <[email protected]>
Subject: [U-Boot-Users] people fade
To: u-boot-users at lists.sourceforge.net
Message-ID: <[email protected]>
Content-Type: text/plain; charset="us-ascii"

An HTML attachment was scrubbed...
URL:
http://sourceforge.net/mailarchive/forum.php?forum=u-boot-users/attachme
nts/20061014/7845e0ac/attachment.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: senate.gif
Type: image/gif
Size: 10426 bytes
Desc: not available
Url :
http://sourceforge.net/mailarchive/forum.php?forum=u-boot-users/attachme
nts/20061014/7845e0ac/attachment.gif

------------------------------

------------------------------------------------------------------------
-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

------------------------------

_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

End of U-Boot-Users Digest, Vol 5, Issue 43
*******************************************

#2 lore raw

Please start reading http://www.catb.org/%7eesr/faqs/smart-questions.html

Please provide a meaningful Subject when posting on this list!!!

Please do not reply to unrelated messages, as this will cause incorrect message thrading!

Quoted 6 lines · In message <[email protected]> you…

I am trying to use U-boot 1.1.4 with the gccversion 3.4.3 (Montavista tool chain). U-Boot builds OK but no output on the serial port. The same U-boot source was working fine with the previous version of tool chain.

Have any one faced this problem before with the 3.4.3 tool chain.

You don't mention which architecture or board you are talking abouyt. Is this a custom board, or one of the supported boards?

Quoted 7 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of u-boot-users-request at lists.sourceforge.net
Sent: Sunday, October 15, 2006 5:40 AM
To: u-boot-users at lists.sourceforge.net
Subject: U-Boot-Users Digest, Vol 5, Issue 43

And don't top post / full quote.

And don't quote completely unrelated text.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Many Myths are based on truth
	-- Spock, "The Way to Eden",  stardate 5832.3
#3 lore raw

[U-Boot-Users] U-boot 1.1.4 with TI Davinci EVM

Hi,

Sorry for the mail with no information.

I am using it on the ARM926EJS platform on a TI Davinci EVM.

U-boot 1.1.4 gets build correctly with the gcc 3.4.3 version, but there is no output on the serial terminal.

U-boot runs fine from SRAM but when booted from NOR flash, there is no output on the serial port.

Is there any specific step needs to be taken when running the code from flash. (Intel strata flash).

Regards,
Nageswari.S

-----Original Message-----
From: [email protected] [mailto:wd at denx.de]
Sent: Monday, October 16, 2006 12:55 PM
To: Srinivasan, Nageswari
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] U-Boot-Users Digest, Vol 5, Issue 43

Please start reading
http://www.catb.org/%7eesr/faqs/smart-questions.html

Please provide a meaningful Subject when posting on this list!!!

Please do not reply to unrelated messages, as this will cause incorrect message thrading!

In message <[email protected]>

Quoted 3 lines · you

I am trying to use U-boot 1.1.4 with the gccversion 3.4.3 (Montavista tool chain). U-Boot builds OK but no output on the serial port. The

same

Quoted 1 line

U-boot source was working fine with the previous version of tool

chain.

Quoted 2 lines

Have any one faced this problem before with the 3.4.3 tool chain.

You don't mention which architecture or board you are talking abouyt. Is this a custom board, or one of the supported boards?

Quoted 7 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of u-boot-users-request at lists.sourceforge.net
Sent: Sunday, October 15, 2006 5:40 AM
To: u-boot-users at lists.sourceforge.net
Subject: U-Boot-Users Digest, Vol 5, Issue 43

And don't top post / full quote.

And don't quote completely unrelated text.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Many Myths are based on truth
	-- Spock, "The Way to Eden",  stardate 5832.3