Skip to contentSkip to conversation

USB HID fails to init USB keyboard

BUG Pete Zaitcev 2 participants 3 messages Feb 6, 2006 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive
Quoted 4 lines · Gabriel A. Devenyi

usb 2-4: new low speed USB device using ohci_hcd and address 3
input: USB-compliant keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-4 drivers/usb/input/hid-core.c: input irq status -32 received

The -32 is a stall, so it probably wants a NOGET quirk.

-- Pete

#2 lore raw
Quoted 11 lines · Pete Zaitcev
Quoted 4 lines · Gabriel A. Devenyi

usb 2-4: new low speed USB device using ohci_hcd and address 3
input: USB-compliant keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-4 drivers/usb/input/hid-core.c: input irq status -32 received

The -32 is a stall, so it probably wants a NOGET quirk.

-- Pete

Google tells me there's a blacklist to handle this, located in drivers/usb/input/hid-core.c, what info do I need to correctly add this keyboard/manufacturer to the blacklist?

--
Gabriel A. Devenyi
[email protected]

#3 lore raw
Quoted 10 lines · Gabriel A. Devenyi
Quoted 6 lines
Quoted 4 lines

usb 2-4: new low speed USB device using ohci_hcd and address 3
input: USB-compliant keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-4 drivers/usb/input/hid-core.c: input irq status -32 received

The -32 is a stall, so it probably wants a NOGET quirk.

Google tells me there's a blacklist to handle this, located in drivers/usb/input/hid-core.c, what info do I need to correctly add this keyboard/manufacturer to the blacklist?

Look at the P: line of your /proc/bus/usb/devices, it has the necessary vendor and product IDs.

-- Pete