Skip to contentSkip to conversation

pxa168: avengers lite board bring up

PATCH New Haojian Zhuang 1 participant 1 message Jan 8, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pxa168: avengers lite board bring up

---
 arch/arm/configs/pxa168_defconfig           |  125 ++++++++++++++++-----------
 arch/arm/mach-mmp/Kconfig                   |    7 ++
 arch/arm/mach-mmp/Makefile                  |    1 +
 arch/arm/mach-mmp/avengers_lite.c           |   51 +++++++++++
 arch/arm/mach-mmp/include/mach/uncompress.h |   12 ++-
 5 files changed, 145 insertions(+), 51 deletions(-)
 create mode 100644 arch/arm/mach-mmp/avengers_lite.c
(quoted diff) +0 -0

b/arch/arm/configs/pxa168_defconfig
index 791b8c3..e9fdfd6 100644

arch/arm/configs/pxa168_defconfig +76 -49

376 lines not on this page · raw message

arch/arm/mach-mmp/Kconfig +7 -0
index 5f0bcf6..6ab843e 100644
@@ -16,6 +16,13 @@ config MACH_ZYLONITE2
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Zylonite2 Development Board.
 
+config MACH_AVENGERS_LITE
+	bool "Marvell's PXA168 Avengers Lite Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Avengers Lite Development Board.
+
 config MACH_TAVOREVB
 	bool "Marvell's PXA910 TavorEVB Development Board"
 	select CPU_PXA910
arch/arm/mach-mmp/Makefile +1 -0
index fb013d6..8b66d06 100644
@@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
 obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
+obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
(quoted diff) +0 -0

b/arch/arm/mach-mmp/avengers_lite.c
new file mode 100644
index 0000000..494e560

arch/arm/mach-mmp/avengers_lite.c new file +51 -0

51 lines not on this page · raw message

(quoted diff) +0 -0

b/arch/arm/mach-mmp/include/mach/uncompress.h
index c93d5fa..1902f6d 100644

arch/arm/mach-mmp/include/mach/uncompress.h +10 -2
@@ -8,14 +8,16 @@
 
 #include <linux/serial_reg.h>
 #include <mach/addr-map.h>
+#include <asm/mach-types.h>
 
 #define UART1_BASE	(APB_PHYS_BASE + 0x36000)
 #define UART2_BASE	(APB_PHYS_BASE + 0x17000)
 #define UART3_BASE	(APB_PHYS_BASE + 0x18000)
 
+static volatile unsigned long *UART = (volatile unsigned long *)UART2_BASE;
+
 static inline void putc(char c)
 {
-	volatile unsigned long *UART = (unsigned long *)UART2_BASE;
 
 	/* UART enabled? */
 	if (!(UART[UART_IER] & UART_IER_UUE))
@@ -34,8 +36,14 @@ static inline void flush(void)
 {
 }
 
+static inline void arch_decomp_setup(void)
+{
+	if (machine_is_avengers_lite())
+		UART = (volatile unsigned long *)UART3_BASE;
+}
+
 /*
  * nothing to do
  */
-#define arch_decomp_setup()
+
 #define arch_decomp_wdog()
Signature · 1 line
1.5.6.5