Skip to contentSkip to conversation

No subject

DISCUSSION [email protected] 1 participant 1 message Dec 5, 2011

lore
Share & tools
lore
#0 lore raw

"IGNORE_CRC bit: In SPI/SSI modes: When set to 1, deassert the chip select (SSn) pin after the command is executed."

Then I tought that mxs_spi_end_xfer should be also called in the case where bitlen==0. In current code this does not happen.

Quoted 2 lines

It seems that the mainline linux only implements a GPIO based SPI driver. So we cannot take it for reference.

There is no mxs spi driver in the mainline kernel yet.