Skip to contentSkip to conversation

Broken network for different u-boot compilation

U-Boot Duy-Ky Nguyen 2 participants 2 messages Nov 7, 2008 – Nov 8, 2008 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hello,

I'm using u-boot 1.3.0 from the latest FreeScale Linux BSP MPC8313E-RDB.

If I set TEXT_BASE = 0x1000000, so I could use BDI debugger to load into RAM and run it out of RAM.
I'm ABLE to ping to the host from u-boot

But, if I set TEXT_BASE=0xFE000000, and burn the image it into Flash, recycle the power to run it out of Flash.
I'm NOT able to ping from u-boot with error message

"No link".

When I change TEXT_BASE from 0x1000000 to 0xFE000000, I have to do "make clean" before "make", otherwise it have error message
" undefined reference to 'env_name_space'"

On the other direction, when I change TEXT_BASE from 0xFE000000 to 0x1000000, I have successful compilation without "make clean", but the u-boot hangs at "DRAM". I have to do "make clean" for successful u-boot AND network access.

I really appreciate your time and help.

Regards,

Duy-Ky

#2 lore raw

Dear Uboot community,

I have a Cirrus Logic EDB7312 prototype evaluation board and want
to port uboot to it. Is the newsgroup still functional? I was not able to access it via thunderbird.

Regards,
Ram

Quoted 36 lines · Duy-Ky Nguyen

Hello,

I'm using u-boot 1.3.0 from the latest FreeScale Linux BSP MPC8313E-RDB.

If I set TEXT_BASE = 0x1000000, so I could use BDI debugger to load into RAM
and run it out of RAM.
I'm ABLE to ping to the host from u-boot

But, if I set TEXT_BASE=0xFE000000, and burn the image it into Flash, recycle the power to run it out of Flash.
I'm NOT able to ping from u-boot with error message

"No link".

When I change TEXT_BASE from 0x1000000 to 0xFE000000, I have to do "make clean" before "make", otherwise it have error message
" undefined reference to 'env_name_space'"

On the other direction, when I change TEXT_BASE from 0xFE000000 to 0x1000000, I have successful compilation without "make clean", but the u-boot hangs at "DRAM". I have to do "make clean" for successful u-boot AND network access.

I really appreciate your time and help.

Regards,

Duy-Ky

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot