Skip to contentSkip to conversation

Kernelnewbies Digest, Vol 71, Issue 22

DISCUSSION Sukanya Ch 1 participant 1 message Oct 19, 2016 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Sukanya Ch

author
#1 lore raw

Hi Wenda Ni,

Please go through the following link to enable debugging output.Seems you have missed enabling DEBUG in Makefile. Hope it will help you.

https://www.kernel.org/doc/local/pr_debug.txt

*CFLAGS_[filename].o := -DDEBUG*

*With Best Regards,*

Sukanya Ch

Software Engineer

VVDN Technologies Pvt Ltd

*Cell : *+91 9551955031 | *Skype :* sukanya.chinthamreddy

Quoted 372 lines · On Tue, Oct 18, 2016 at 7:44 PM, <[email protected]>…

Send Kernelnewbies mailing list submissions to
kernelnewbies at kernelnewbies.org

To subscribe or unsubscribe via the World Wide Web, visit
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
or, via email, send a message with subject or body 'help' to
kernelnewbies-request at kernelnewbies.org

You can reach the person managing the list at
kernelnewbies-owner at kernelnewbies.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of Kernelnewbies digest..."

Today's Topics:

1. kernel loglevel (Wenda Ni)
2. Re: kernel loglevel (Wenda Ni)
3. Re: kernel loglevel (Joel Fernandes)
4. Re: kernel loglevel (Thibaut SAUTEREAU)
5. Re: kernel loglevel (Wenda Ni)
6. Fw: TPS65910 Regulator Isuue (Amit Mahadik)

----------------------------------------------------------------------

Message: 1
Date: Mon, 17 Oct 2016 19:17:32 -0400
From: Wenda Ni <[email protected]>
Subject: kernel loglevel
To: kernelnewbies at kernelnewbies.org
Message-ID:
<CAEnvTt0RRDWtMD=VxVpuhiiJ+MRX2g3WiTgXkA-M5GGaTMyB-g@
mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

Dear all,

I am working on a kernel module that incorporate both pr_debug and pr_warn. I would like to see pr_debug messages from dmesg.

What I followed is to specify kernel parameter by saying "loglevel=7". This can be seen confirmed from /proc/cmdline. But still, I donot get pr_debug level messages either from dmesg or from /var/log/messages. I also tried echo 7 > /proc/sys/kernel/printk. It does not return what I expect, either.

Let me know what I am missing. Thank you very much in advance.

Cheers,

Wenda Ni, Ph.D.

------------------------------

Message: 2
Date: Mon, 17 Oct 2016 19:47:14 -0400
From: Wenda Ni <[email protected]>
Subject: Re: kernel loglevel
To: Thibaut SAUTEREAU <[email protected]>
Cc: kernelnewbies at kernelnewbies.org
Message-ID:
<CAEnvTt3oh+tuhKCwho8eZd5VmJfuXdcmWGpUpsji
H2wWSFpWvg at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Thank you so much, Thibaut. I have spotted the source-code logic in include/linux/prink.h

Cheers,

Wenda Ni, Ph.D.

Quoted 23 lines · Thibaut SAUTEREAU
Quoted 13 lines · Wenda Ni

Dear all,

I am working on a kernel module that incorporate both pr_debug and pr_warn. I would like to see pr_debug messages from dmesg.

What I followed is to specify kernel parameter by saying "loglevel=7". This can be seen confirmed from /proc/cmdline. But still, I donot get pr_debug level messages either from dmesg or from /var/log/messages. I also tried echo 7 > /proc/sys/kernel/printk. It does not return what I expect, either.

Let me know what I am missing. Thank you very much in advance.

Quoted 8 lines

Cheers,

Wenda Ni, Ph.D.

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Quoted 5 lines

Hello Wenda,

I encountered the same issue a while ago.
As stated here: http://elinux.org/Debugging_by_printing
pr_debug is replaced with an empty statement unless the kernel is

compiled

Quoted 4 lines

with DEBUG. So if you just want to play with printing kernel debug logs, just define the DEBUG macro in your module source file for testing.

I also observed that without a new line character at the end of the

string

Quoted 1 line

passed to pr_debug, I could not find the log line in dmesg output. Not

sure

Quoted 4 lines

where this comes from.

--
Thibaut SAUTEREAU

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/
attachments/20161017/8f8419cb/attachment-0001.html

------------------------------

Message: 3
Date: Mon, 17 Oct 2016 16:48:46 -0700
From: Joel Fernandes <[email protected]>
Subject: Re: kernel loglevel
To: Wenda Ni <[email protected]>
Cc: "kernelnewbies at kernelnewbies.org"
<[email protected]>
Message-ID:

        <CAD=GYpb-UKodnqeb0o71KytF_M2pLGV7bRzZ3YL4Ck0GqLdU+A@

mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

Hi Wenda,

pr_debug needs you to define the DEBUG macro to activate it.

Check:
http://stackoverflow.com/questions/28936199/pr-debug-not-giving-any-output

and the kernel docs,
https://www.kernel.org/doc/local/pr_debug.txt

Joel

Quoted 13 lines · Wenda Ni

Dear all,

I am working on a kernel module that incorporate both pr_debug and pr_warn. I would like to see pr_debug messages from dmesg.

What I followed is to specify kernel parameter by saying "loglevel=7". This can be seen confirmed from /proc/cmdline. But still, I donot get pr_debug level messages either from dmesg or from /var/log/messages. I also tried echo 7 > /proc/sys/kernel/printk. It does not return what I expect, either.

Let me know what I am missing. Thank you very much in advance.

Quoted 8 lines

Cheers,

Wenda Ni, Ph.D.

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

------------------------------

Message: 4
Date: Tue, 18 Oct 2016 01:41:57 +0200
From: Thibaut SAUTEREAU <[email protected]>
Subject: Re: kernel loglevel
To: Wenda Ni <[email protected]>
Cc: kernelnewbies at kernelnewbies.org
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"

Quoted 13 lines · Wenda Ni

Dear all,

I am working on a kernel module that incorporate both pr_debug and pr_warn. I would like to see pr_debug messages from dmesg.

What I followed is to specify kernel parameter by saying "loglevel=7". This can be seen confirmed from /proc/cmdline. But still, I donot get pr_debug level messages either from dmesg or from /var/log/messages. I also tried echo 7 > /proc/sys/kernel/printk. It does not return what I expect, either.

Let me know what I am missing. Thank you very much in advance.

Quoted 8 lines

Cheers,

Wenda Ni, Ph.D.

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Hello Wenda,

I encountered the same issue a while ago.
As stated here: http://elinux.org/Debugging_by_printing
pr_debug is replaced with an empty statement unless the kernel is compiled with DEBUG. So if you just want to play with printing kernel debug logs, just define the DEBUG macro in your module source file for testing.

I also observed that without a new line character at the end of the string passed to pr_debug, I could not find the log line in dmesg output. Not sure where this comes from.

--
Thibaut SAUTEREAU
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 455 bytes
Desc: not available
Url : http://lists.kernelnewbies.org/pipermail/kernelnewbies/
attachments/20161018/d282cce1/attachment-0001.bin

------------------------------

Message: 5
Date: Mon, 17 Oct 2016 20:29:33 -0400
From: Wenda Ni <[email protected]>
Subject: Re: kernel loglevel
To: Joel Fernandes <[email protected]>
Cc: "kernelnewbies at kernelnewbies.org"
<[email protected]>
Message-ID:
<CAEnvTt0BmAJ_nxf0oEUsFqqJjGssuXCQBg6pdt95Jk
3PyBBQew at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Hi Joel,

It works by specifying ccflags-y += -DDEBUG in the Makefile.

Thank you for the info!!!!

Cheers,

Wenda Ni, Ph.D.

Quoted 6 lines · Joel Fernandes

Hi Wenda,

pr_debug needs you to define the DEBUG macro to activate it.

Check:
http://stackoverflow.com/questions/28936199/pr-debug-

not-giving-any-output

Quoted 29 lines

and the kernel docs,
https://www.kernel.org/doc/local/pr_debug.txt

Joel

Quoted 21 lines · Wenda Ni

Dear all,

I am working on a kernel module that incorporate both pr_debug and pr_warn. I would like to see pr_debug messages from dmesg.

What I followed is to specify kernel parameter by saying "loglevel=7". This can be seen confirmed from /proc/cmdline. But still, I donot get pr_debug level messages either from dmesg or from /var/log/messages. I also tried echo 7 > /proc/sys/kernel/printk. It does not return what I expect, either.

Let me know what I am missing. Thank you very much in advance.

Cheers,

Wenda Ni, Ph.D.

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/
attachments/20161017/16f479c1/attachment-0001.html

------------------------------

Message: 6
Date: Tue, 18 Oct 2016 14:11:41 +0000 (UTC)
From: Amit Mahadik <[email protected]>
Subject: Fw: TPS65910 Regulator Isuue
To: Kernelnewbies <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"

Hi,? ? ?I am working on integrating TPS695190 regulator code into kernel version 4.4.16. The regulator powers MMC card slot using Designware MMC controller. I have declared the necessary code in my board.c file. The MMC card slot is powered by ldo8 supply declared as
------------------------------------------------------------
-----------------Code---------------------------------------
------------------------------------------

static struct regulator_consumer_supply opv5xc_ldo8_supply[] = { ??????? REGULATOR_SUPPLY("sd_vdd", NULL),
};

static struct regulator_init_data opv5xc_ldo8 = {
??????? .constraints = {
??????????????? .min_uV = 1000000,
??????????????? .max_uV = 3300000,
??????????????? .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | ??????????????????????????????? REGULATOR_CHANGE_STATUS), ??????????????? .boot_on = 1,
??????? },
??????? .num_consumer_supplies = ARRAY_SIZE(opv5xc_ldo8_supply), ??????? .consumer_supplies = opv5xc_ldo8_supply,
};
static struct tps65910_board tps65910_pdata = {
????? ??????? .tps65910_pmic_init_data[TPS65911_REG_LDO8]???? = &opv5xc_ldo8,
};
static struct i2c_board_info __initdata opv5xc_i2c1_devs[] = { ??????? {
??????????????? I2C_BOARD_INFO ("tps65911", TPS65910_I2C_ID1), ??????????????? .platform_data = &tps65910_pdata,
??????? },
};
------------------------------------------------------------
------------------------------------------------------------
-----------------------------------------------
When I call regulator_get struct regulator *sd_vdd = regulator_get(NULL, "sd_vdd");? function from the Designware MMC driver code function the kernel panics.I have attached the log file for reference. Can somebody please let me know what I am doing wrong here?
Regards,Amit.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/
attachments/20161018/389572dc/attachment.html -------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: log.txt
Url: http://lists.kernelnewbies.org/pipermail/kernelnewbies/
attachments/20161018/389572dc/attachment.txt

------------------------------

Quoted 9 lines

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

End of Kernelnewbies Digest, Vol 71, Issue 22
*********************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20161019/e17a60d7/attachment-0001.html