Skip to contentSkip to conversation

imx_watchdog: do not soft-reset while watchdog init

PATCH New Anatolij Gustschin 1 participant 1 message Apr 16, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 imx_watchdog: do not soft-reset while watchdog init

Currently the driver clears WCR_SRS bit when enabling the watchdog and this causes a software reset. Do not clear WCR_SRS.

---
 drivers/watchdog/imx_watchdog.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/watchdog/imx_watchdog.c +2 -1
index 50e602a..d5993b4 100644
@@ -19,6 +19,7 @@ struct watchdog_regs {
 #define WCR_WDBG	0x02
 #define WCR_WDE		0x04	/* WDOG enable */
 #define WCR_WDT		0x08
+#define WCR_SRS		0x10
 #define WCR_WDW		0x80
 #define SET_WCR_WT(x)	(x << 8)
 
@@ -45,7 +46,7 @@ void hw_watchdog_init(void)
 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 128000
 #endif
 	timeout = (CONFIG_WATCHDOG_TIMEOUT_MSECS / 500) - 1;
-	writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT |
+	writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT | WCR_SRS |
 		WCR_WDW | SET_WCR_WT(timeout), &wdog->wcr);
 	hw_watchdog_reset();
 }
Signature · 4 lines
1.7.9.5


--MP_/wQB/os9RVxA5P=aEF3GvFZN--