1.1.6 at91 based board dataflash copy panic.
A message that is not in the archive (sent off-list or not yet received): mailman.221629.1167910946.30209.u-boot-users@lists.sourceforge.net
Hello,
I had the same problem with u-boot with dataflash only setup
(no NOR flash) and used the following patch (see attach)
cmd_mem.c doing wrong when copy from Dataflash to SDRAM:
- if (addr_dataflash(addr) && !addr_dataflash(dest) &&
(addr2info(dest)==NULL) ){
+ if (addr_dataflash(addr) && !addr_dataflash(dest)
+#ifndef CFG_NO_FLASH
+ && (addr2info(dest)==NULL)
+#endif
+ ){
and do not forget to set CFG_NO_FLASH in your include.
------------------------------------
Best regards, Ivan
Embedded Linux Engineer
Promwad - www.promwad.com
------------------------------------
--------------------------------------------------
Hello all,
We are trying u-boot 1.1.6 on a customised at91rm9200 board. The main features are dataflash, 32MB and networking with DM9161.
We have been using u-boot 1.1.4 quite well now, but we would like to test 1.1.6. Kernel boots ok, but we have found a problem.
When we do a cp from the dataflash to ram like this:
cp.b $(kerneladdr) 0x21600000 0x1
where kerneladdr is 0xC0040000
we have the following:
data abort
Resetting CPU ...
-------------- next part --------------
A non-text attachment was scrubbed...
Name: u-boot-1.1.6.at91.copy_from_dataflash_to_ram.chub.diff
Type: application/octet-stream
Size: 1576 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070104/05f893af/attachment.obj
A message that is not in the archive (sent off-list or not yet received): 1167921259.5828.29.camel@localhost
Hello,
Quoted 4 lines
When
CFG_NO_FLASHis defined the content of eitherflash.horflash.cis not included in the code, but dataflash support depends on that so I get a compilation error. I have been playing around and it seems that it is not possible to do a exclusive dataflash binary for u-boot, am I right?
Yes, now there is quite a mess with dataflash only setup. I was able to do "exclusive dataflash binary for u-boot" by adding necessary defines from flash.h to dataflash.h (these changes where included in patch I sent):
------------------------------------------------
#define ERR_OK 0 #define ERR_TIMOUT 1 #define ERR_NOT_ERASED 2 #define ERR_PROTECTED 4 #define ERR_INVAL 8 #define ERR_ALIGN 16 #define ERR_UNKNOWN_FLASH_VENDOR 32 #define ERR_UNKNOWN_FLASH_TYPE 64 #define ERR_PROG_ERROR 128
/*
* Protection Flags for flash_protect():
*/
#define FLAG_PROTECT_SET 0x01
#define FLAG_PROTECT_CLEAR 0x02
------------------------------------------------
and removing flash related commands such as CFG_CMD_FLASH CFG_CMD_IMLS from board config. It was just quick workaround.
------------------------------------
Best regards, Ivan
Embedded Linux Engineer
Promwad - www.promwad.com
------------------------------------
Quoted 29 lines
Hi.
I have applied that patch and the problem is solved. Anyway I have needed to do some additional changes. I will try to explain.
When
CFG_NO_FLASHis defined the content of eitherflash.horflash.cis not included in the code, but dataflash support depends on that so I get a compilation error. I have been playing around and it seems that it is not possible to do a exclusive dataflash binary for u-boot, am I right?As code is written
CFG_NO_FLASHmeans that there isn't_anykind_of flash. So I guess the define in your patch should beCFG_DATAFLASH_ONLYor similar.Thanks for your help,
Regards.
--
Gerardo Mart?nez Bernat
tlf: 91 351 11 20
Barracuda Systems SL
C/ Luxemburgo n?4
28224 Madrid