Skip to contentSkip to conversation

Store existing atags at startup if chainloading.

PATCH New Alistair Buxton 1 participant 1 message Sep 1, 2010 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 2/15 Store existing atags at startup if chainloading.

This patch stores the values in r1 and r2 at startup. It also stores the address which u-boot was originally loaded to. This is useful if you feed some other bootloader a u-boot.bin instead of the linux kernel it was expecting. It is rather ugly because it stores these values in an arbitrary memory address.

---
 arch/arm/cpu/armv7/start.S |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)
arch/arm/cpu/armv7/start.S +16 -0
index db8e9d2..8a456f0 100644
@@ -134,6 +134,22 @@ IRQ_STACK_START_IN:
  */
 
 reset:
+#if (CONFIG_CHAINLOADER)
+	/*
+	 * Ugly hack: store the u-boot load address and kernel params
+	 * 0x82000004: address where this image was loaded
+	 * 0x82000008: mach_type
+	 * 0x8200000c: atags address
+	 */
+	adr 	r0, _start
+	mov 	r3, #0x82000000
+	add	r3, r3, #4
+	str	r0, [r3]
+	add	r3, r3, #4
+	str	r1, [r3]
+	add	r3, r3, #4
+	str	r2, [r3]
+#endif
 	bl	save_boot_params
 	/*
 	 * set the cpu to SVC32 mode
Signature · 7 lines
1.7.4.1


--nextPart1511561.nRVgJThL9n
Content-Disposition: attachment; filename="0003-Nokia-RX-51-aka-N900-support.patch"
Content-Transfer-Encoding: 7Bit
Content-Type: text/x-patch; charset="UTF-8"; name="0003-Nokia-RX-51-aka-N900-support.patch"