Skip to contentSkip to conversation

Drop 2.2/2.4 kernel support in alsa-driver

DISCUSSION Tom Watson 1 participant 1 message Jul 13, 2011 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Tom Watson

author
#1 lore raw

Jaroslav Kysela <[email protected]> Wrote:

Quoted 18 lines
Quoted 12 lines · Takashi Iwai

[This is resent since I haven't seen my original post due to
alsa-project.org site down. If you have already read it, please disregard.]

Hi,

in upcoming 3.0-kernel era, I believe it's high time to drop the support of old 2.2/2.4 kernels in alsa-driver external builds. Recently I changed some PCI drivers to use KBUILD_MODNAME, and this isn't supported by the old kernels, i.e. it's currently broken for these kernels. But I have no more gut to patch alsa-driver/* codes.

Quoted 4 lines

Is there any active user of such kernels with the latest alsa-driver? If not, let's clean up the whole things.
2.2/2.4 kernel users can still use 1.0.24, and we can release 1.0.24.x series if really needed.

Quoted 4 lines

I agree. I believe that these kernels are using minimum users now. Almost all embeded devices are using 2.6 kernels, too.

Jaroslav

While this IS a good idea, I would suggest that ALSA take a cue from the kernel people and bump the version up a major number. It would make lots of sense that ALSA 2.0 go with kernel version 3.0. An alternative might be to skip version 2.0 and go to ALSA 3.0 to match kernel version 3.0.

This won't change any code, but it would be a little clearer. That way when you drop support for older kernels, you can easily tell what version should be used.

"Just a suggestion" worth the paper it is written on.

Signature · 2 lines
Tom Watson
[email protected]