Skip to contentSkip to conversation

commit: dpcm: Allow FE to be opened without valid BE routes

DISCUSSION anish kumar 3 participants 5 messages Nov 6, 2012 – Nov 7, 2012 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Commit 3ac3f5ca91afc03587b1d2d642f126efc5be37ca
ASoC: dpcm: Allow FE to be opened without valid BE routes.

        if (dpcm_path_get(fe, stream, &list) <= 0) {
-               dev_warn(fe->dev, "asoc: %s no valid %s route\n",
+               dev_dbg(fe->dev, "asoc: %s no valid %s route\n",
                        fe->dai_link->name, stream ? "capture" :
"playback");
-                       mutex_unlock(&fe->card->mutex);
-                       return -EINVAL;
        }

As I can see this commit has changed the log level from dev_warn to dev_dbg but this has caused a subtle problem.Right now we rely on this warning to find out issues related to "application not sending UCM commands causing mute issues".Sometimes we have seen that the device becomes mute due to application not sending UCM command properly and these issues are hard to reproduce(all we get is dump).So all we have is this log to find out if the FE(front-end) and BE(back-end) has at-lease matched or not and most of the time it doesn't and we find out that using this very log.

With this gone it would be difficult to find out the problem.I don't see any harm in reverting it back to dev_warn as it will warn us that "still we have not received UCM command for turning on Back-end" and in case we receive it then this log hardly matters and just gives us information that "at that time it was not a valid route".

If everyone agrees then I would be more than happy to send a patch.

#2 lore raw
Quoted 23 lines · anish kumar

Commit 3ac3f5ca91afc03587b1d2d642f126efc5be37ca
ASoC: dpcm: Allow FE to be opened without valid BE routes.

         if (dpcm_path_get(fe, stream, &list) <= 0) {
(quoted diff) +1 -1
-               dev_warn(fe->dev, "asoc: %s no valid %s route\n",
+               dev_dbg(fe->dev, "asoc: %s no valid %s route\n",
                         fe->dai_link->name, stream ? "capture" :

"playback");

(quoted diff) +0 -2
-                       mutex_unlock(&fe->card->mutex);
-                       return -EINVAL;
         }

As I can see this commit has changed the log level from dev_warn to dev_dbg but this has caused a subtle problem.Right now we rely on this warning to find out issues related to "application not sending UCM commands causing mute issues".Sometimes we have seen that the device becomes mute due to application not sending UCM command properly and these issues are hard to reproduce(all we get is dump).So all we have is this log to find out if the FE(front-end) and BE(back-end) has at-lease matched or not and most of the time it doesn't and we find out that using this very log.

Quoted 8 lines

With this gone it would be difficult to find out the problem.I don't see any harm in reverting it back to dev_warn as it will warn us that "still we have not received UCM command for turning on Back-end" and in case we receive it then this log hardly matters and just gives us information that "at that time it was not a valid route".

If everyone agrees then I would be more than happy to send a patch.

I did the change since it is quite valid use case to open the FE PCM device without a configured route to a BE (as some Android devices do). This was filling up the log with lots of warning messages when in fact there was nothing wrong.

It sounds like from your description you are doing some debugging and dev_dbg() is intended for this.

Liam

#3 lore raw
In reply to anish kumar
Quoted 3 lines · anish kumar

As I can see this commit has changed the log level from dev_warn to dev_dbg but this has caused a subtle problem.Right now we rely on this warning to find out issues related to "application not sending UCM

You shouldn't be relying on parsing dmesg for anything, that's never going to be robust as you've just found. dmesg is for humans.

Quoted 1 line

If everyone agrees then I would be more than happy to send a patch.

Please come up with a better way of identifying this; something like information in debugfs for example or working on getting the media controller API support merged and then using that to parse out the routing map from that and notice the misconfiguration. This would be much better anyway since the same thing can happen elsewhere in DAPM and your current mechanism.

#4 lore raw
Quoted 8 lines · Mark Brown
Quoted 3 lines · anish kumar

As I can see this commit has changed the log level from dev_warn to dev_dbg but this has caused a subtle problem.Right now we rely on this warning to find out issues related to "application not sending UCM

You shouldn't be relying on parsing dmesg for anything, that's never going to be robust as you've just found. dmesg is for humans.

Probably I couldn't explain the problem clearly.Problem is that in our case we get sometimes(very random) audio mute in android devices due to UCM commands from the platform not sent properly or sent in such a way that FE and BE don't get connected.
This issues are very hard to reproduce and only gets reproduced randomly by the test engineer and when it does happen, test engineer takes crash dump and provides us the log.So it is almost impossible to know what caused this audio mute at that time and all we have is this very log(dev_warn(FE and BE not connected)) to let us know that this mute was due to platform and not codec or any other problem with the kernel. Anyway looks like this idea is not liked by the community so I won't push further.
Thanks for reading.

Quoted 9 lines
Quoted 2 lines

If everyone agrees then I would be more than happy to send a patch.

Please come up with a better way of identifying this; something like information in debugfs for example or working on getting the media controller API support merged and then using that to parse out the routing map from that and notice the misconfiguration. This would be much better anyway since the same thing can happen elsewhere in DAPM and your current mechanism.

#5 lore raw
Quoted 5 lines · anish kumar
Quoted 2 lines · Mark Brown

You shouldn't be relying on parsing dmesg for anything, that's never going to be robust as you've just found. dmesg is for humans.

Quoted 12 lines

Probably I couldn't explain the problem clearly.Problem is that in our case we get sometimes(very random) audio mute in android devices due to UCM commands from the platform not sent properly or sent in such a way that FE and BE don't get connected.
This issues are very hard to reproduce and only gets reproduced randomly by the test engineer and when it does happen, test engineer takes crash dump and provides us the log.So it is almost impossible to know what caused this audio mute at that time and all we have is this very log(dev_warn(FE and BE not connected)) to let us know that this mute was due to platform and not codec or any other problem with the kernel. Anyway looks like this idea is not liked by the community so I won't push further.

This really just sounds like a basic debugging issue, you can either add additional trace locally or work to improve the trace infrastructure - for example, make sure there's tracepoints showing what DPCM does in the same way there are tracepoints for DAPM.