mtest question
A message that is not in the archive (sent off-list or not yet received): mailman.697164.1194015405.7786.u-boot-users@lists.sourceforge.net
Hello ,
Quoted 1 line · E Robertson
When mtest is used without args what is the default memory addresses
it uses?
The default memory addresses are defined in your board config file. Look at the defines:
#define CFG_MEMTEST_START
#define CFG_MEMTEST_END
bye
Heiko
Quoted 11 lines · Heiko Schocher
Hello ,
Quoted 1 line · E Robertson
When mtest is used without args what is the default memory addresses
it uses?
The default memory addresses are defined in your board config file. Look at the defines:
#define
CFG_MEMTEST_START
#defineCFG_MEMTEST_END
Thanks, I guess I should have grepped first.
How long does it generally take for mtest to do a test on 1M of memory? I left mine running for a few hours and it was still going.
Hello,
Quoted 10 lines · E Robertson
Quoted 9 lines · Heiko Schocher
Hello ,
Quoted 1 line · E Robertson
When mtest is used without args what is the default memory addresses
it uses?
The default memory addresses are defined in your board config file. Look at the defines:
Quoted 8 lines
Quoted 2 lines
#define
CFG_MEMTEST_START
#defineCFG_MEMTEST_ENDThanks, I guess I should have grepped first.
How long does it generally take for mtest to do a test on 1M of memory? I left mine running for a few hours and it was still going.
It runs endless, unless you press Ctrl-C ;-)
You maybe have defined CFG_ALT_MEMTEST, then it stops, if an error occur or Ctrl-C is pressed.
bye
Heiko