mx6qsabrelite:Use IMX_GPIO_NR Macro
PATCH 1/1 mx6qsabrelite:Use IMX_GPIO_NR Macro
Signed-off-by Ashok Kumar Reddy <[email protected]>
--- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
board/freescale/mx6qsabrelite/mx6qsabrelite.c +12 -12
@@ -197,18 +197,18 @@ static iomux_v3_cfg_t button_pads[] = {static void setup_iomux_enet (void ) { -gpio_direction_output (87 ,0 );/* GPIO 3-23 */ -gpio_direction_output (190 ,1 );/* GPIO 6-30 */ -gpio_direction_output (185 ,1 );/* GPIO 6-25 */ -gpio_direction_output (187 ,1 );/* GPIO 6-27 */ -gpio_direction_output (188 ,1 );/* GPIO 6-28*/ -gpio_direction_output (189 ,1 );/* GPIO 6-29 */ +gpio_direction_output (IMX_GPIO_NR (3 ,23 ),0 ); +gpio_direction_output (IMX_GPIO_NR (6 ,30 ),1 ); +gpio_direction_output (IMX_GPIO_NR (6 ,25 ),1 ); +gpio_direction_output (IMX_GPIO_NR (6 ,27 ),1 ); +gpio_direction_output (IMX_GPIO_NR (6 ,28 ),1 ); +gpio_direction_output (IMX_GPIO_NR (6 ,29 ),1 );imx_iomux_v3_setup_multiple_pads (enet_pads1,ARRAY_SIZE (enet_pads1)); -gpio_direction_output (184 ,1 );/* GPIO 6-24 */ +gpio_direction_output (IMX_GPIO_NR (6 ,24 ),1 );/* Need delay 10ms according to KSZ9021 spec */ udelay (1000 *10 ); -gpio_set_value (87 ,1 );/* GPIO 3-23 */ +gpio_set_value (IMX_GPIO_NR (3 ,23 ),1 );imx_iomux_v3_setup_multiple_pads (enet_pads2,ARRAY_SIZE (enet_pads2)); }
@@ -249,11 +249,11 @@ int board_mmc_getcd(struct mmc *mmc)int ret;if (cfg->esdhc_base ==USDHC3_BASE_ADDR ) { -gpio_direction_input (192 );/*GPIO7_0*/ - ret = !gpio_get_value (192 ); +gpio_direction_input (IMX_GPIO_NR (7 ,0 )); + ret = !gpio_get_value (IMX_GPIO_NR (7 ,0 )); }else { -gpio_direction_input (38 );/*GPIO2_6*/ - ret = !gpio_get_value (38 ); +gpio_direction_input (IMX_GPIO_NR (2 ,6 )); + ret = !gpio_get_value (IMX_GPIO_NR (2 ,6 )); }return ret;
Signature · 1 line
1.7.9.5