Skip to contentSkip to conversation

Shaping only FTP traffic

LARTC Shanker Balan 2 participants 2 messages Sep 25, 2001

lore
Share & tools
lore
#0 lore raw

Hello:

I am a bit unclear on shaping FTP traffic only. How do i do it?

This is what i currently have:

# classid 1:100 is a 200Kbit limiter
# filter for matching "ftp-data" (0x14) and "ftp" (0x15) ports
$TC filter add dev eth1 parent 1:0 protocol ip prio 9 u32 match ip \
sport 0x14 0xffff flowid 1:100
$TC filter add dev eth1 parent 1:0 protocol ip prio 8 u32 match ip \
sport 0x15 0xffff flowid 1:100

This does not seem to work. Can anyone provide me with a filter for catching active and passive FTP connects?

Thank you for your time.

Signature · 7 lines
Emperor Palpatine:
	Everything that has transpired has done so according
	to my design.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#1 lore raw
Quoted 1 line · Shanker Balan

Hello:

hi!

Quoted 1 line

I am a bit unclear on shaping FTP traffic only. How do i do it?

you just filter by ftp-data port (20) and by passive ports range (most ftp daemons gives you the chance to define a determinate range of ports to use in passive mode)

i discourage you from shaping ftp control traffic (21), because of the annoying delay you introduce in the interactiveness of the ftp session

Quoted 11 lines

This is what i currently have:

# classid 1:100 is a 200Kbit limiter
# filter for matching "ftp-data" (0x14) and "ftp" (0x15) ports
$TC filter add dev eth1 parent 1:0 protocol ip prio 9 u32 match ip \
sport 0x14 0xffff flowid 1:100
$TC filter add dev eth1 parent 1:0 protocol ip prio 8 u32 match ip \
sport 0x15 0xffff flowid 1:100

This does not seem to work. Can anyone provide me with a filter for catching active and passive FTP connects?

this is how i do it using iptables marking and fw tc filter

#for matching ftp-data
iptables -A OUTPUT -o $IF_EXT -p tcp --sport 20 -j MARK 1 #for matching passive ports range that i configured in my ftp daemon iptables -A OUTPUT -o $IF_EXT -p tcp --sport 5000:5100 -j MARK 1

#and now the tc filters using fw
tc filter add dev $IF_EXT parent 1:0 protocol ip prio 1 handle 1 fw classid 1:100

Quoted 1 line

Thank you for your time.

ivan

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/